77.150.60 铅、锌和锡产品 标准查询与下载

YS/T 523-2011 锡、铅及其合金箔和锌箔

本标准规定了加工锡、铅及其合金箔和锌箔的要求、试验方法和检验规则、标志、包装、运输和贮存及质量证明书和合同（或订货单）等内容。 本标准适用于电气、仪表、医疗器械等工艺部门制造零件使用的锡、铅及其合金箔和锌箔。

Tin and tin alloy foil-lead and lead alloy foil-zinc foil

DB34/T 1552.1-2011 再生铝 第1部分：铸造铝合金锭

本部分适用于以废旧铝材料为原料经精炼加工生产的、主要应用于铝铸件、铝板带箔和建筑及工业用铝型材等行业再生铝锭。再生铝锭不应用于食品制造行业。

Recycled aluminum Part 1: Aluminum alloy ingots for casting

DB34/T 1552.2-2011 再生铝 第2部分：变形铝合金锭

本部分适用于以废旧铝材料为原料经精炼加工生产的、主要应用于轧制或其他变形用坯料使用的再生铝锭。再生铝锭不应用于食品制造行业。

Recycled aluminum Part 2: Wrought aluminium alloys ingots

YS/T 225-2010 照相制版用微晶锌板

本标准规定了照相制版用微晶锌板的要求、试验方法、检验规则及标志、包装、运输、贮存和合同(或订货单)内容等。 本标准适用于无粉腐蚀照相制版用微晶锌板(以下简称锌板)。

Microcrystalline zinc plate for zincography

YS/T 565-2010 电池用锌板和锌带

本标准规定了电池用锌板和锌带的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存和合同(或订货单)内容等。 本标准适用于制造锌-锰干电池负极焊接锌筒用锌板和锌带。

Zinc plate and zinc strip for dry cell

ASTM B86-10e1 锌和锌 - 铝（ZA）合金铸造和压铸件的标准规范

Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

ASTM B952/B952M-10 旋转铸造用锭状锌合金的标准规格

1.1 This specification covers zinc alloys in ingot form for remelting for the manufacture of Spin Castings as specified and designated, as shown in Table 1. Seven alloy compositions are specified, designated as follows:

Standard Specification for Zinc Alloys in Ingot Form for Spin Casting

ASTM B86-10a 锌和锌铝(ZA)合金铸造和压铸件标准规格

1.1 This specification covers commercial zinc, zinc-aluminum castings and continuous cast bar stock, as designated and specified in Table 1. Seven alloy compositions are specified and designated as follows:

Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

ASTM B894-09 ACuZinc5（锌铜铝）合金压铸件的标准规范

1.1 This specification covers ACuZinc5, zinc-copper-aluminum alloy die castings. (UNS Z46541). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

ASTM B892-09 压铸用铸锭型ACuZinc5（锌铜铝）合金的标准规范

1.1 This specification covers ACuZinc5, a commercial zinc-copper-aluminum alloy (Z46540), in ingot form for remelting for use in the production of castings. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

JIS H 4301:2009 铅薄板和板硬铅薄板和板

This Japanese Industrial Standard specifies the arolled lead sheets and plates and hard lead sheets and plates (hereafter referred to as "sheets and plates") used for the apparatus for radiation protection and sound insulation at medical treatment facilities, nuclear facilities and so on ,and the apparatus for architecture, chemical inductries and so on.

Lead sheets and plates and hard lead sheets and plates

ASTM B86-09a 锌和锌 - 铝（ZA）合金铸造和压铸件的标准规范

Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

JIS H 5301 AMD 1:2009 锌合金压铸件(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS H 5301:1990 is partially replaced with this Amend- ment.

Zinc Alloys Die Castings (Amendment 1)

SANS 25:2008 压模铸件用锌合金铸锭

Covers two grades of zinc die-castings alloy in the form of ingots.

Zinc alloy ingots for die-castings

ANSI/ASTM F1182:2007 阳极镀锌合金规范

This specification covers the requirements for zinc anodes in the form of slabs, plates, discs, and rods for corrosion protection (cathodic protection) of metals and alloys. The anodes are primarily intended to reduce corrosion of surface ship and submarine hulls, steel and aluminum equipment and structures, sea chests, sonar domes, and the seawater side of condensers and other heat exchangers. The values stated in inch-pound units are to be regarded as standard. The metric (SI) units, given in parentheses, are for information purposes only and may be approximate. This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Anodes, Sacrificial Zinc Alloy

ASTM F1182-07 牺牲锌合金阳极的标准规范

1.1 This specification covers the requirements for zinc anodes in the form of slabs, plates, discs, and rods for corrosion protection (cathodic protection) of metals and alloys. 1.2 The anodes are primarily intended to reduce corrosion of surface ship and submarine hulls, steel and aluminum equipment and structures, sea chests, sonar domes, and the seawater side of condensers and other heat exchangers. 1.3 The values stated in inch-pound units are to be regarded as standard. The metric (SI) units, given in parentheses, are for information purposes only and may be approximate. 1.4 This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Anodes, Sacrificial Zinc Alloy

DS/EN 12588:2007 铅和铅合金 建筑用轧制铅板

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work. No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

Lead and lead alloys - Rolled lead sheet for building purposes

YS/T 636-2007 铅及铅锑合金棒和线材

本标准规定了挤制铅及铅锑合金棒、线材的要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于各工业部门用铅及铅锑合金棒、线材。

Lead and lead-antimony alloys rod and wire

NF A58-003*NF EN 12588:2007 铅和铅合金.建筑物用薄铅板

Lead and lead alloys - Rolled lead sheet for building purposes.

DIN EN 12588:2007 铅和铅合金.建筑用轧制铅薄板

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet, Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels,damp-proof courses and similar building work. No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

Lead and lead alloys - Rolled lead sheet for building purposes; English version of DIN EN 12588:2007-03