77.180 冶金设备 标准查询与下载

YB/T 013-2017 中小型水平连铸机机械设备

Small and medium-sized horizontal continuous casting machine machinery and equipment

YB/T 4631-2017 高炉用铸铜冷却壁

Cast copper cooling stave for blast furnace

YB/T 4632-2017 复合式高炉风口

Compound blast furnace tuyere

JB/T 13116-2017 钢丝缠绕式热等静压机

Steel wire winding hot isostatic press

JB/T 13120-2017 铝熔铸用直流电磁搅拌器

DC electromagnetic stirrer for aluminum melting and casting

JB/T 13118-2017 铝熔铸用交流电磁搅拌器

AC electromagnetic stirrer for aluminum melting and casting

JB/T 13119-2017 铝熔铸用永磁搅拌器

Permanent magnetic stirrer for aluminum melting and casting

GOST 34196-2017 用于铝生产的电解槽 一般规格

Electrolytic cell for aluminium production. General specifications

DIN EN 16774:2016 机械安全 炼钢转炉和相关设备的安全要求；德文版 EN 16774:2016

Safety of machinery - Safety requirements for steel converter and associated equipment; German version EN 16774:2016

JB/T 12938.1-2016 板坯连铸机 第1部分:术语

JB/T 12938的本部分规定了板坯连铸机的基本和常用术语及其定义或释义，同时给出了英文译名。 本部分适用于板坯连铸机设备。

Slab caster.Part 1: Terminology

JB/T 12943-2016 冷连轧机组 飞剪 通用技术要求

本标准规定了冷连轧机组飞剪的技术要求和检验规则。 本标准适用于冶金设备螺旋刃冷连轧机组飞剪。

Cold tandem rolling line.Drum-type flying shear.Universal technical requirements

YS/T 1126-2016 电阻式超高温真空炉

Resistance ultra-high temperature vacuum furnace

YB/T 4556-2016 冷弯型钢轧辊

本标准规定了辊弯成型冷弯型钢轧辊(以下简称：轧辊)的技术要求、试验方法、检验规则、标识、包装、运输、贮存和质量证明书等。 本标准适用于辊弯成型冷弯型钢生产用锻造轧辊和铸造轧辊。

Rolls for cold-formed steel rolling mill

DB37/T 2800-2016 真空抬包使用安全规程

Vacuum ladle use safety regulations

BS EN 16774:2016 机械的安全性. 炼钢转炉和相关设备的安全要求

Safety of machinery. Safety requirements for steel converter and associated equipment

YB/T 4545-2016 钕铁硼连铸用结晶辊

本标准规定了钕铁硼连铸用结晶辊的结构型式、辊套的规格型号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于制造钕铁硼连铸用结晶辊(以下简称：结晶辊)及结晶辊辊套。

Rolls for continuous casting of Nd-Fe-B

YB/T 4546-2016 线棒材连铸用结晶轮

本标准规定了线棒材连铸用结晶轮(以下简称：结晶轮)的结构型式、规格型号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于制造铜、铝线棒材连铸用结晶轮，其他金属线棒材连铸用结晶轮的制造亦可参照使用。

Wheel for wire and bar continuous casting

YB/T 4544-2016 非晶带材连铸用甩带冷却辊

本标准规定了非晶带材连铸用甩带冷却辊的结构型式、辊套的规格型号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于制造非晶软磁合金带材冷却辊(以下简称：冷却辊)及冷却辊辊套，也适用于纳米晶软磁合金带材冷却辊及冷却辊辊套。

Rolls for amorphous ribbon continuous casting

EN 16774:2016 机械安全-转炉和相关设备的安全要求

This European Standard applies for steel converter and its associated equipment (hereinafter referred to as converter plant) used in the process of carbon or stainless steel making as defined in 3.1 and illustrated in Annex B. This European Standard deals with significant hazards, hazardous situations and events relevant to the converter plant. It covers the intended use and foreseeable misuse. This European Standard specifies the safety requirements to be met during transport, assembly, commissioning, operation, maintenance (as described in Clause 5) and decommissioning/disassembly of the equipment. This European Standard applies to: Steel converter and its associated equipment for the oxygen steelmaking process- from hot metal/liquid steel and scrap charging; - via oxygen refining and stirring; - temperature measurement and sampling equipment; - up to tapping including slag retaining device; - cooling systems; - maintenance devices (e. g. relining device, tap hole repair device); - process related interfaces/interactions (e. g. according to design, controls) to; - media; - primary and secondary gas cleaning plant; - material feeding systems and ladle alloying systems; - transfer cars for steel ladle and slag pot, and; - charging/tapping equipment, e. g. crane, scrap chute, ladles and slag pots. This European Standard does not cover safety requirements for; - usage of process media other than oxygen, nitrogen, argon and compressed air; - primary and secondary gas cleaning plants; - measuring devices with radioactive sources; - material feeding systems and ladle alloying systems; - transfer cars for steel ladle and slag pot; - charging/tapping and de-slagging equipment, e. g. crane, scrap chutes, ladles and slag pots; - auxiliary winches and hoists. NOTE 1 For variations of converter process where other gases and media, e. g. hydrocarbons, fuels, steam, etc. are used, additional safety measures have to be considered which are not covered in this safety standard This European Standard is not applicable to converter plant, manufactured before the date of publication of this standard in the Official Journal (OJ). NOTE 2 In case of revamping, this European Standard can be used as a guideline for the specific parts to be revamped.

Safety of machinery - Safety requirements for steel converter and associated equipment

SAE AMS3092A-2015 现场成型垫片制备过程中使用的脱模剂

This specification establishes requirements for solvent-based and water-based release agents, in bulk or aerosol form.

Release Agent@ for Use During Form-In-Place Gasket Preparation