81.060.20 陶瓷制品 标准查询与下载

T/CSTM 00652-2021 弥散强化铜基复合材料

本文件规定了弥散强化铜基复合材料（以下简称复合材料）的术语和定义、分类和代号、技术要求、试验方法、检验规则、标志、包装、贮存和运输等。 本文件适用于缝焊轮坯料、大规模集成电路引线框架、电阻焊电极、电触头材料等产品的制备以及汽车、电子、高端装备等行业应用的弥散强化铜基复合材料。

Dispersion strengthened copper matrix composite

T/CZBX 001-2021 曼生十八式 分类和定义

曼生十八式壶型的定义、分类与命名、美学比例

Classification and Difinition of Man-Sheng Teapot with Eighteen Styles

T/ZZB 2401-2021 越窑青瓷食具

本文件规定了越窑青瓷食具的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于以越窑青瓷特征工艺制作而成的碗、盘、碟、盏、杯、壶等饮食用器具。

Porcelain tableware of Yueyao celadon

T/KLCA CA01-2021 潦浒陶

一、配料 （一）泥料 将采自曲靖市境内天然花红土、白果青、金刚泥、豆瓣土、大白土、底子泥等陶土为主要原料，根据潦浒陶产品对泥料的不同要求，单一使用或多种原料按比例混合进行配料。 （二）釉料 将采自曲靖市境内天然釉土作为原料，可单一使用，也可以为了增强坯釉的结合性能，以釉土为主要基础原料，按合理比例添加长石、石英、高岭土、方解石、白云石等一种或多种天然原料；以及为了得到特色的高温艺术釉效果，还可以在上述釉料中，按合理比例分别添加天然金属矿物或以天然金属矿物提纯的金属氧化物。 二、制泥、制釉浆 （一）把配合好的原料经加水研磨、搅拌、滤筛等工艺制成泥浆，榨泥脱水后制成含水率20%—28%的陶泥。 注：　注浆产品直接使用泥浆。 （二）把配合好的釉料经研磨、滤筛、搅拌等工序制成所需的釉浆。 三、陈腐 陶泥经初次练泥后密闭存贮陈腐，陈腐时间不少于半个月。 注：　注浆泥直接贮存泥浆陈腐。 四、真空练泥 按照潦浒陶不同产品成型方法要求的不同，采用真空练泥练制成所需泥段备用。 五、制坯 按照潦浒陶不同产品要求或客户对产品的要求，采用手工拉坯、拍坯、塑捏，机械旋压、滚压、塑压，注浆等不同成型方法，制做出陶坯。 六、初次干燥 制做好的陶坯初次干燥到含水率10%—18%。干燥方法根据不同要求可以采用自然干燥或热风干燥。 七、修坯 对初次干燥的毛坯进行人工修坯、抛光，使坯体符合形状要求、厚薄合适、表面光洁，达到无釉烧成的半成品要求或者适合进一步湿坯装饰的要求。 八、湿坯装饰 采用雕、刻、镂、贴、堆等一种或多种装饰手段，制做出所需形状的半成品。 九、二次干燥 制作好的半成品二次干燥到含水率3%以下。干燥方法根据不同要求可以采用自然干燥或热风干燥。 十、干坯装饰 需要书画艺术装饰的产品，采用陶瓷颜料在干燥陶坯上创作而成。 十一、施釉 高温艺术釉产品和需要施釉的产品，根据要求采用浸釉、浇釉、喷釉、刷釉、蘸釉等一种或多种方法，对陶坯施釉。 十二、烧成 （一）烧成温度 潦浒陶的烧成温度要求为1220 ℃～1300 ℃。 （二）烧成气氛 根据潦浒陶不同产品要求或客户对产品的需求，可以采用氧化气氛、还原气氛或氧化气氛与还原气氛配合采用。 （三）烧成周期 根据不同产品和不同烧成方法要求，烧成周期从6小时到20天不等。 （四）烧成方法 根据潦浒陶不同产品要求或客户对产品的需求，可以采用气烧、电烧、柴烧等烧成方法。 注：　有的产品需要采用二次烧成工艺，第一次烧成温度为一般为700 ℃～1000 ℃，又称为氧化素烧；第二次烧成温度为1220 ℃～1300 ℃。 十三、打磨 烧好的产品经过检验分级后，根据产品的不同要求进行磨底、磨口、抛光等工艺处理。

LiaoHu Pottery

ASTM C1678-21 陶瓷和玻璃中断裂镜尺寸的断口分析的标准实施规程

1.1?This practice pertains to the analysis and interpretation of fracture mirror sizes in brittle materials. Fracture mirrors (Fig. 1) are telltale fractographic markings that surround a fracture origin in brittle materials. The fracture mirror size may be used with known fractu

Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses

T/JCWH 001-2021 红色钧官窑作品鉴定评级规范

本文件规定了红色钧官窑作品鉴定评级规范的术语和定义、烧制工艺、基本原则、作品分类、要求、鉴定技术和方法、鉴定证书和检验报告。 本文件适用于红色钧官窑鉴定评级，一是作为国礼的若干个器型作品，二是红色钧官窑新工艺出口创汇的若干器型作品。 本文件不适用于在此特定时间段除了特定生产厂家以外的生产厂家及个人生产的钧瓷作品。

Appraisal and Grading Specifications for Red Junguan Kiln Works

DB4414/T 10-2020 地理标志产品 大埔青花瓷

适用于国家市场监督主管部门根据《地理标志产品保护规定》批准保护的大埔青花瓷

Geographical Indication Products Tai Po Blue and White Porcelain

DB42/T 1684-2021 地理标志产品 管窑陶器

Geographical Indication Products Tube Kiln Pottery

ASTM C872-10(2021) 铅和镉从瓷釉表面释放的标准测试方法

1.1 This test method covers the precise determination of lead and cadmium extracted by acetic acid from porcelain enamel surfaces. 1.2 Values stated in SI units are to be regarded as the standard. Inch-pound units are given for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces

T/CAI 114-2021 地理标志产品 邵武青云窑瓷器

本文件规定了邵武青云窑瓷器的术语和定义、地理标志产品保护范围、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。

Product of geographical indication-Shaowu Qingyun Kiln porcelain

KS L 9201-2020 瓮器（韩国传统陶器）

Onggi(Korean traditional earthen ware)

KS L 9202-2020 白瓷 sabal 和 daejub（韩国传统：米饭和汤碗）

White ware sabal and daejub(Korean traditional: rice & soup bowls)

KS L 1002-2020 骨瓷餐具

Bone china table ware

DB5103/T 21-2020 荣县土陶生产技术规范

本文件规定了荣县土陶生产技术的术语和定义、生产条件、生产工艺、生产管理、生产记录。 本文件适用于荣县土陶。

Rongxian clay pottery production technical specification

DB5103/T 22-2020 荣县土陶通用质量技术规范

本文件规定了荣县土陶通用质量技术的术语和定义、产品分类与编码、原料要求、工序质量要求、产品质量要求、检验方法、不合格品处置。 本文件适用于荣县土陶。

General Quality Technical Specifications for Rongxian Earthen Pottery

T/FZWLW 17-2020 抗菌日用陶瓷

本标准规定了抗菌日用陶瓷的产品分类、一般要求、抗菌性能要求、试验方法、检验规则以及标志、包装、运输、贮存要求。 本标准适用于采用离子交换工艺、具有抗菌功能的日用陶瓷生产、检验和验收。

Antibacterial domestic ceramic

DB41/T 2206-2021 扒村瓷

Pacun porcelain

ASTM E1875-20a 声共振法测定动态杨氏模量、剪切模量和泊松比的标准试验方法

1.1 This test method covers the determination of the dynamic elastic properties of elastic materials. Specimens of these materials possess specific mechanical resonant frequencies that are determined by the modulus of elasticity, mass, and geometry of the test specimen. Therefore, the dynamic elastic properties of a material can be computed if the geometry, mass, and mechanical resonant frequencies of a suitable test specimen of that material can be measured. The dynamic Young’s modulus is determined using the fundamental flexural resonant frequency. The dynamic shear modulus, or modulus of rigidity, is found using the fundamental torsional resonant frequency. Dynamic Young’s modulus and dynamic shear modulus are used to compute Poisson’s ratio. 1.2 This test method is specifically appropriate for materials that are elastic, homogeneous, and isotropic (1).2 1.3 Materials of a composite character (particulate, whisker, or fiber reinforced) may be tested by this test method with the understanding that the character (volume fraction, size, morphology, distribution, orientation, elastic properties, and interfacial bonding) of the reinforcement in the test specimen will have a direct effect on the elastic properties. These reinforcement effects shall be considered in interpreting the test results for composites. 1.4 This test method shall not be used for determination of Poisson’s ratio of anisotropic materials. NOTE 1—For anisotropic materials, Poisson’s ratio can have different values in different directions. Due to the lack of symmetry in anisotropic materials, the elasticity tensor cannot be reduced to only two independent numbers, and the simplified relation between E, G, and µ is not valid. 1.5 This test method should not be used for specimens that have cracks or voids that are major discontinuities in the specimen. 1.6 The test method should not be used when materials cannot be fabricated in a uniform rectangular or circular cross section. 1.7 An elevated-temperature furnace and cryogenic chamber are described for measuring the dynamic elastic moduli as a function of temperature from –195 °C to 1200 °C. 1.8 This test method may be modified for use in quality control. A range of acceptable resonant frequencies is determined for a specimen with a particular geometry and mass. Any specimen with a frequency response falling outside this frequency range is rejected. The actual modulus of each specimen need not be determined as long as the limits of the selected frequency range are known to include the resonant frequency that the specimen must possess if its geometry and mass are within specified tolerances. 1.9 There are material-specific ASTM standards that cover the determination of resonant frequencies and elastic properties of specific materials by sonic resonance or by impulse excitation of vibration. Test Methods C215, C623, C747, C848, C1198, C1259, and C1548 differ from this test method in several areas (for example; specimen size, dimensional tolerances, specimen preparation). The testing of these materials shall be done in compliance with these material specific standards. Where possible, the procedures, specimen specifications, and calculations are consistent with these test methods. 1.10 A separate standard, Test Method E1876, governs determination of dynamic elastic moduli by impulse excitation instead of sonic resonance. 1.11 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.12 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.13 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This test method is under the jurisdiction of ASTM Committee E28 on Mechanical Testing and is the direct responsibility of Subcommittee E28.04 on Uniaxial Testing. Current edition approved Dec. 1, 2020. Published March 2021. Originally approved in 1997. Last previous edition approved in 2020 as E1875-20. DOI: 10.1520/E1875-20A. 2 The boldface numbers in parentheses refer to a list of references at the end of this standard. *A Summary of Changes section appears at the end of this standard Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

ASTM C949-80(2020) 通过染色渗透法测定玻璃质白瓷中孔隙率的标准试验方法

1.1 This test method covers procedures for detecting pores, cracks, or other voids that may be present in otherwise impermeable whiteware ceramics, or as porosity in underfired ware. NOTE 1—This test method was partially derived from ANSI C29.1. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration

ASTM C554-93(2020) 通过热冲击法测定烧制釉面陶瓷白色抗龟裂性的标准试验方法

1.1 This test method covers the determination of the resistance to crazing of fired, glazed, ceramic whitewares when stresses residual after glost firing may cause a tendency to craze, such stresses being induced by factors other than moisture expansion. 1.2 This test is not intended to induce moisture expansion, which fact should be kept in mind if the materials to be evaluated may exhibit moisture expansion. NOTE 1—Test Method C424 covers a method for determining resistance to crazing induced by moisture expansion. Its use is generally confined to testing nonvitreous and semivitreous ceramic whitewares because these products may be subject to such expansion. For whitewares with negligible moisture expansion (such as vitreous and impervious ware), the thermal shock method described herein is generally to be preferred. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Warning in 6.3. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method