87.060.20 涂料粘合剂 标准查询与下载

KS M ISO 11668-2017 色漆和清漆用粘合剂氯化聚合树脂通用试验方法

Binders for paints and varnishes－Chlorinated polymerization resins－General methods of test

ASTM D1982-13(2017) 脂肪酸滴定度的标准试验方法

1.1 This test method covers the determination of the solidification (titer) point of fatty acids and is applicable to all fatty acids. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Titer of Fatty Acids

ASTM D889-13(2017) 松香挥发油的标准试验方法

1.1 This test method covers the determination of the volatile oil content of rosin or similar material. The oil may consist of naturally occurring terpene oil, such as heavy fractions of turpentine, resulting from incomplete distillation in the processing of the rosin, or of foreign nonterpene oil resulting from incomplete removal of mineral or coal-tar solvent used to extract the rosin from wood or still wastes. In certain cases the volatile oil could consist of decarboxylated rosin formed during the processing of the rosin. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Volatile Oil in Rosin

DB35/T 1668-2017 室内装饰装修用环氧树脂嵌缝剂

本标准规定了室内装饰装修用环氧树脂嵌缝剂（以下简称嵌缝剂）的术语和定义、产品分类与标记、要求、试验准备、试验方法、检验规则、包装、标识和标志、运输和贮存。 本标准适用于由环氧树脂（A组分）与多元胺类固化剂（B组分）组成的室内装饰装修用无溶剂型嵌缝剂。

Epoxy resin caulk for interior decoration

DIN 55939:2017 色漆和清漆用粘合剂.蓖麻子油.要求和试验方法

Binders for paints and varnishes - Castor oil - Requirements and methods of test

ASTM D5062-09(2017) 通过体积/重量测定确定树脂溶液稀释度的标准测试方法

1.1 This test method covers both volumetric and gravimetric determination of resin solution dilutability which gives a numerical value for the overall solubility of the resin expressed as percent dilutability. 1.2 This test method is applicable only if the test solution is of sufficient clarity to allow accurate visual judgement of the end point and of low enough viscosity for efficient mixing to take place. 1.3 This test method is primarily for, but not limited to, resins used in the printing ink industry. 1.4 The percent solvent tolerance of a resin can be determined using this test method if the solvent in the resin solution and the dilution solvent are the same. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

ASTM D6090-17 软化点树脂的标准试验方法(杯球法)

4.1 In general, with materials of these types, softening point does not take place at a definite temperature. As the temperature rises, these materials gradually change from brittle or exceedingly thick and slow-flowing materials to softer and less viscous liquids. For this reason, the determination of the softening point must be made by a fixed, arbitrary, and closely defined method if the results obtained are to be comparable. 1.1 This test method covers the determination of softening point of resins using a Mettler cup and ball apparatus, and may, under user-defined conditions, give results comparable to those obtained by Test Methods E28. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

KS M ISO 4625-1-2016 色漆和清漆用粘合剂软化点的测定第1部分:环球法

Binders for paints and varnishes－Determination of softening point－Part 1：Ring-and-ball method

KS M ISO 4625-1:2016 色漆和清漆用粘合剂软化点的测定 第1部分：环球法

Binders for paints and varnishes－Determination of softening point－Part 1：Ring-and-ball method

ASTM D2621-87(2016) 用于溶剂型可降解涂料的车辆固体红外鉴定的标准测试方法

1.1 This test method covers the qualitative characterization or identification of separated paint vehicle solids by infrared spectroscopy within the limitations of infrared spectroscopy. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints

DIN EN ISO 4629-2:2016 色漆和清漆用粘合剂.羟值的测定.第2部分:使用催化剂的滴定法(ISO 4629-2-2016).德文版本EN ISO 4629-2-2016

Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016); German version EN ISO 4629-2:2016

DIN EN ISO 4629-1:2016 色漆和清漆用粘合剂.羟值的测定.第1部分:不使用催化剂的滴定法(ISO 4629-1-2016).德文版本EN ISO 4629-1-2016

Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016); German version EN ISO 4629-1:2016

HG/T 5063-2016 溶剂型聚氨酯木器涂料用固化剂

Solvent-based polyurethane wood coating curing agent

DIN 55940:2016 色漆和清漆用粘合剂.脱水蓖麻油.要求和试验方法

Binders for paints and varnishes - Dehydrated castor oil - Requirements and methods of test

DIN 55938:2016 色漆和清漆用粘合剂.精炼豆油.要求和试验方法

Binders for paints and varnishes - Refined soya bean oil - Requirements and methods of test

DIN 55957:2016 涂料和清漆用粘合剂.脂肪酸的甲基化和硅烷化及气相色谱法的分析

Binders for paints and varnishes - Methylation and silylation of fatty acids and analysis by gas chromatography

BS EN ISO 4629-1:2016 色漆和清漆用粘合剂.羟值的测定.不使用催化剂的滴定法

Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method without using a catalyst

BS EN ISO 4629-2:2016 色漆和清漆用粘合剂.羟值的测定.使用催化剂的滴定法

Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method using a catalyst

ISO 4629-2:2016 色漆和清漆用粘合剂.羟值的测定.第2部分:使用催化剂的滴定法

Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst

ISO 4629-1:2016 色漆和清漆用粘合剂.羟值的测定.第1部分:不使用催化剂的滴定法

Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst