87.060.20 涂料粘合剂 标准查询与下载

ASTM D6887-03(2020) 用于测试与树脂或树脂溶液的醇溶剂相容性的标准测试方法

1.1 This test method covers the procedure for determining the degree of compatibility of an alkyd with a specific resin or resin solution. 1.2 The most common use of this method is to test alkyd compatibility with a hydrocarbon resin or a solution of the resin in an aliphatic solvent, for lithographic ink vehicle applications. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

ASTM D465-15(2020) 包括妥尔油及其他相关产品在内的松木化工产品的酸值标准试验方法

1.1 These test methods are intended for determining the acid number of pine chemical products as defined in Terminology D804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows: 1.1.1 Potentiometric method (referee), and 1.1.2 Internal indicator method (alternate). 1.2 The potentiometric method is suitable for use with both lightand dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with lightand medium-colored products with a Gardner color of less than 12. It should be considered the alternate method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products

HG/T 5571-2019 涂料用天然树脂乳液

Natural resin emulsion for coatings

KS M ISO 6744-1:2019 涂料和清漆的粘合剂 - 醇酸树脂 - 第1部分:一般测试方法

Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test

KS M ISO 6744-2:2019 涂料和清漆的粘合剂 - 醇酸树脂 - 第2部分:邻苯二甲酸酐含量的测定

Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content

KS M ISO 6744-2-2019 涂料和清漆的粘合剂 - 醇酸树脂 - 第2部分:邻苯二甲酸酐含量的测定

Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content

KS M ISO 6744-3:2019 油漆和清漆的粘合剂 - 醇酸树脂 - 第3部分:不皂化物质含量的测定

Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content

KS M ISO 6744-4:2019 油漆和清漆的粘合剂 - 醇酸树脂 - 第4部分:脂肪酸含量的测定

Binders for paints and varnishes — Alkyd resins — Part 4: Determination of fatty acid content

KS M ISO 6744-1-2019 涂料和清漆的粘合剂 - 醇酸树脂 - 第1部分:一般测试方法

Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test

KS M ISO 6744-4-2019 油漆和清漆的粘合剂 - 醇酸树脂 - 第4部分:脂肪酸含量的测定

Binders for paints and varnishes — Alkyd resins — Part 4: Determination of fatty acid content

KS M ISO 6744-3-2019 油漆和清漆的粘合剂 - 醇酸树脂 - 第3部分:不皂化物质含量的测定

Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content

T/GDTL 004-2019 绿色产品评价 耐候性聚酯粉末 涂料用聚酯树脂

5.2　评价指标 评价指标由一级指标和二级指标组成。 一级指标包括资源属性指标、能源属性指标、环境属性指标和品质属性指标。 聚酯树脂指标应符合下表1和表2的规定。产品在通过制作粉末涂料成膜后，涂层的物理指标还应符合表3的规定。 （详见本标准表1、表2、表3）

Green product assessment — Polyester resin for weatherable polyester powder coatings

ISO 276:2019 色漆和清漆用粘合剂.亚麻籽油.要求和试验方法

This document specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.

Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test

ASTM D4209-07(2019) 测定纤维素、乳液、树脂溶液、虫胶和清漆的挥发性和非挥发性含量的标准实施规程

1.1 This practice is intended to serve as a guide to the selection of the proper ASTM test method for determining the volatile and nonvolatile content of cellulosics, emulsions, resin solutions, shellac, and varnishes. NOTE 1—Standards for determining the composition of the volatile fraction are not covered by this practice. 1.2 The standards referenced in the practice are as follows: Classification Section ASTM Standard Cellulosics 5.1 D871 D914 D1347 Emulsions 5.2 D2369 Resin Solutions 5.3 D1259 D1490 Shellac 5.4 D29 D1650 Varnishes 5.5 D115 D1644 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes

ASTM D1725-12(2019) 用气泡时间法测量粘度用树脂溶液制备的标准实施规程

1.1 This practice provides instructions for preparing resin solutions viscosity measurement by bubble time method. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method

ASTM D1849-95(2019) 涂料包装稳定性的标准试验方法

1.1 This test method covers the change in consistency and certain other properties that may take place when liquid paint of either the solvent-reducible or water-reducible type is stored at a temperature above 0 °C (32 °F). 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Package Stability of Paint

BS EN ISO 3681:2018 油漆和清漆的粘合剂 皂化值的测定 滴定法

What is this standard about? This document specifies a titrimetric method for determining the esterified-acid content in binders for paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained. Because different binders vary in their resistance to saponification, this document is of limited applicability. If necessary, completeness of saponification can be checked by repeating the test under more severe conditions achieved by the use of longer saponification time, more concentrated potassium hydroxide solution, or a higher-boiling alcohol as solvent. This document also specifies a procedure suitable for binders that saponify with difficulty. The method is not applicable to those materials that show further reaction with alkalis beyond normal saponification.

Binders for paints and varnishes. Determination of saponification value. Titrimetric method

BS EN ISO 150:2018 用于油漆和清漆的生亚麻籽油、精炼亚麻籽油和煮沸亚麻籽油 规格和测试方法

What is this standard about? This document specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.

Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test

ISO 3681:2018 油漆和清漆的粘合剂 - 皂化值的测定 - 滴定法

This document specifies a titrimetric method for determining the esterified-acid content in binders for paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained. Because different binders vary in their resistance to saponification, this document is of limited applicability. If necessary, completeness of saponification can be checked by repeating the test under more severe conditions achieved by the use of longer saponification time, more concentrated potassium hydroxide solution, or a higher-boiling alcohol as solvent. Annex A specifies a procedure suitable for binders that saponify with difficulty. The method is not applicable to those materials that show further reaction with alkalis beyond normal saponification.

Binders for paints and varnishes — Determination of saponification value — Titrimetric method

ISO 150:2018 原料 精制和煮沸的亚麻子油油漆和清漆 - 规格和测试方法

This document specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.

Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test