87.060.30 溶剂 标准查询与下载

TIS 496-2010 清漆稀释剂

Lacquer thinner

DIN EN ISO 8623:2011 色漆和清漆用松焦油脂肪酸.规范和试验方法(ISO 8623-1997);德文版本EN ISO 8623-2010

Tall-oil fatty acids for paints and varnishes - Specifications and test methods (ISO 8623:1997); German version EN ISO 8623:2010

ASTM D2251-10 卤化有机溶剂及其掺和剂的金属腐蚀性的标准试验方法

These tests are to be used as a guide in selecting or eliminating certain solvents or grades of solvents used for cleaning or degreasing metal parts.1.1 This test method covers the evaluation of the corrosiveness to metals by halogenated organic solvents and their admixtures for cold cleaning applications. Note 18212;The test method described herein is an adaptation of Test Method D130. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

ASTM D2359-10 精制苯-535标准规范

1.1 This specification covers a grade of benzene known as refined benzene-535. 1.2 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 Consult current OSHA regulations, supplier''s Material Safety Data Sheets, and local regulations for all materials used in this specification.

Standard Specification for Refined Benzene-535

DIN 53171:2009 色漆和清漆用溶剂 蒸馏特性的测定(沸程和沸点温度为蒸馏体积的函数)

Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling temperature as a function of distilled volume)

DIN 53172:2009 色漆和清漆用溶剂.蒸发残渣的测定

Solvents for paints and varnishes - Determination of evaporation residue

DIN 53173:2009 色漆和清漆用溶剂.羰基值的测定

Solvents for paints and varnishes - Determination of carbonyl value

DIN 55685:2009 色漆和清漆用溶剂.酒精.纯度的气相色谱分析

Solvents for paints and varnishes - Alcohols - Gas chromatographic determination of the degree of purity

DIN 55683:2009 色漆和清漆用溶剂.仅包括有机溶剂的涂层材料中的溶剂的测定.气相色谱法

Solvents for paints and varnishes - Determination of the solvents in coating materials containing organic solvents only - Gaschromatographic method

DIN 55687:2009 色漆和清漆用溶剂.酮类.纯度的气相色谱法测定

Solvents for paints and varnishes - Ketones - Gas chromatographic determination of the degree of purity

DIN 53170:2009 色漆和清漆用溶剂.蒸发速度的测定

Solvents for paints and varnishes - Determination of the evaporation rate

DIN 53247:2009 油漆和清漆用溶剂.酮.供应规范.进一步要求和试验方法

Solvents for paints and varnishes - Ketones - Supply specifications, further requirements and methods of test

DIN 53245:2009 油漆和清漆用溶剂.醇类.供应规范,进一步的性能和试验方法

Solvents for paints and varnishes - Alcohols - Supply specification, further properties and methods of test

DIN 53246:2009 油漆和清漆用溶剂.乙酸酯.交付规范.进一步要求和试验方法

Solvents for paints and varnishes - Acetic esters - Delivery specification, further requirements and methods of test

DIN 55998:2009 油漆和清漆用溶剂 丙二醇醚 供应规范 进一步要求和试验方法

Solvents for paints and varnishes - Propylene glycol ethers - Supply specification, further requirements and methods of test

DIN 55999:2009 油漆和清漆用溶剂.乙二醇醚.供应规范.进一步的性质和试验方法

Solvents for paints and varnishes - Ethylene glycol ethers - Supply specification, further properties and methods of test

ASTM D2359-09 精制苯-535的标准规范

Standard Specification for Refined Benzene-535

TIS 610-2009 脱漆剂

Paint remover

TIS 1318-2009 缓凝稀释剂

Retarded thinner

ASTM D1722-09 水溶性溶剂的水可混性试验方法

Water-insoluble materials present in a solvent expected to be completely water miscible may interfere with many uses of the solvent. This test method provides a measure of the miscibility of water-soluble solvents with a polar medium-water. It also provides a qualitative indication of the presence or absence of water-immiscible contaminants. The results of this test method may be used in assessing compliance with a specification. Prior to agreeing to this test method as the basis of a specification requirement, it may be desirable that the interpretation of what constitutes cloudiness or turbidity be agreed upon between the supplier and the purchaser.1.1 This test method covers the determination of the miscibility of water-soluble solvents with water. While written specifically for testing acetone, isopropyl alcohol (isopropanol), and methyl alcohol (methanol), the method is suitable for testing most water-soluble solvents. 1.2 This test method serves to detect water-immiscible contaminants qualitatively; the level of detection of these impurities varies widely with both the type of solvent and the type of impurity. 1.3 The level of detection of water-insoluble materials depends upon the solvent tested and the type of impurity or impurities present, that is paraffin, olefin, aromatic, high molecular weight alcohol, or ketone, etc. There is, therefore, no specific level of impurity detected by this procedure. Note 18212;This test method is normally performed at ambient, but other temperatures may be used as specified by the consumer and supplier. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 For specific hazard information and guidance, consult the supplier''s Material Safety Data Sheet for materials listed in this test method. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Water Miscibility of Water-Soluble Solvents