97.200.40 游乐场 标准查询与下载

T/ZZB 3114-2023 动漫刀剑

本文件规定了动漫刀剑（以下简称刀、剑）的术语和定义、产品型式、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于刀（剑）身由碳素钢材料制造的，用于动漫、表演等艺术用途的未开刃刀（剑）。

Anime sword

ASTM F2376-23 水滑梯系统的分类、设计、制造、施工和操作的标准实施规程

1.1 This practice applies to the classification, design, manufacture, construction, auditing, major modification, and operation of water slide systems. Water slide systems shall be defined as rides intended for use by riders in bathing attire where the action of the ride involves possible and purposeful immersion of the rider’s body either in whole or in part in water, and uses circulating water to mobilize or lubricate the rider’s transportation along a purpose built path. This includes slides used with or without vehicles as defined below. The terms water slides, waterslides, and slides shall be considered equivalent when used in this practice. 1.1.1 Owner/operator requirements of this standard are required of all water slide systems regardless of date of construction. 1.1.2 The design, manufacture and construction of an existing water slide or portions of a water slide system unaffected by a major modification shall meet the standard requirements in existence at the time of the construction. 1.2 For the purposes of this practice, a water slide system includes: 1.2.1 The flume, 1.2.2 The water-circulation system, 1.2.3 The starting platform with associated means of access and egress, 1.2.4 The structural supports, 1.2.5 Vehicles or other aquatic accessories that are part of the water slide as defined by the manufacturer, and 1.2.6 Means of slide termination. 1.3 This practice shall not apply to: 1.3.1 Any water slides installed in private residences, 1.3.2 Water flume amusement rides where contact with water is merely incidental (for example, log flume rides, shoot-the-chutes), 1.3.3 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.3.4 Lazy river type attractions operating at constant elevation, constructed in the ground, 1.3.5 Inflatable water slides (constant air supply) that are mounted on land (refer to Practice F2374-22 for the requirements of these types of water slides), 1.3.6 Inflatable water slides (captured air) that are floating on a body of water (refer to EN/ISO 25649-2017, parts 1 through 7), and 1.3.7 Water slides less than 6 ft tall. (Refer to Practice F2461-20a for the requirements of slides less than 6 ft tall.) 1.4 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant, as defined in Terminology F747-22, and the manufacturer provides: 1.4.1 A historical summary of the water slide, or major modification as defined in Terminology F747-22, and 1.4.2 A statement that the design is service proven or previously compliant. Water slides and major modifications to water slides may qualify as previously compliant for five years following the date of publication of this practice. Thereafter, water slides and major modifications to water slides must qualify as service proven or meet the requirements of this practice. 1.4.3 Service proven or previously compliant designs shall comply with Section 4. 1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. NOTE 1—The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N. 1.6 This practice includes an Appendix, which provides additional information to enhance the user’s understanding of and application of the criteria presented in this practice, for example, rationale, background, drawings, interpretation, or commentary. The information in the Appendix shall not be considered a mandatory part of this practice. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the 1 This practice is under the jurisdiction of ASTM Committee F24 on Amusement Rides and Devices and is the direct responsibility of Subcommittee F24.70 on Water Related Amusement Rides and Devices. Current edition approved June 1, 2023. Published August 2023. Originally approved in 2006. Last previous edition approved in 2022 as F2376 – 22. DOI: 10.1520/F2376-23. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems

ISO 17842-1:2023 游乐设施和游乐设施的安全 第1部分：设计和制造

Safety of amusement rides and amusement devices — Part 1: Design and manufacture

GSO ASTM F1487:2023 公众使用游乐场设备的标准消费者安全性能规范

  Scope is not provided for this standard

Standard Consumer Safety Performance Specification for Playground Equipment for Public Use

ISO/TR 24666:2023 体育和娱乐设施 游乐场设备上的诱捕/缠结探针 数据收集

Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data

ISO/FDIS 17842-1 游乐设施和游乐设备的安全 第1部分：设计和制造

Safety of amusement rides and amusement devices — Part 1: Design and manufacture

ISO/DTR 24666 体育和娱乐设施 游乐场设备上的诱捕/缠绕探测 数据收集

Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data

T/CAAPA 0005-2023 无动力游乐设施 绳网

整个标准的内容可分为两大部分： “1 范围”到“3 术语和定义”为第一部分，主要界定了本标准的适用范围以及适用于本标准的术语定义。本标准规定了无动力游乐设施绳网的分类、要求、试验方法、检验规则及标志、使用说明、包装、运输与贮存。并对本标准所用的绳网、支撑型绳网、保护型绳网、辅助型绳网等相关术语进行了定义。 “4分类”到“8 标志、使用说明、包装、运输与贮存”为第二部分，构成了该标准的主体部分，从分类，要求，试验方法，检验规则，标志、使用说明、包装、运输与贮存等方面对绳网进行了全面的规定。第4章分类是结合目前无动力游乐设施绳网使用中的不同用途对其进行了界定，便于各方统一认识；第5章要求主要是为了保障绳网在各类使用场景中的安全性对其各类性能和参数提出要求，包括材料要求、外形和结构、跌落保护、挤夹、绳索、结构强度、承载性能、外观和涂装等方面；第6章试验方法主要是针对第5章提出的各类技术要求给出相应的试验验证方法；第7章检验规则规范了绳网的出厂检验、型式检验以及抽样与判断；第8章对绳网的标志、使用说明、包装、运输与贮存提出了相关的要求。

No power type of amusement devices—Rope net

T/ZZB 2885-2022 小型游乐设施 淘气堡

本文件规定了小型游乐设施淘气堡的术语和定义、基本要求、技术要求、试验方法、检验规则、标志和使用维保说明书、使用管理、包装、运输、贮存及质量承诺。 本文件适用于 3 周岁～14 周岁儿童在室内公共场所游乐用的小型游乐设施淘气堡（以下简称“淘气堡”）。

Small amusement device—Mischievous castle

T/CPASE M024-2022 客运索道运营使用合规管理基本要求

本文件依据《中华人民共和国特种设备安全法》、GB/T 35770—2022《合规管理体系 要求及使用指南》和市场监管总局对于特种设备使用单位落实使用安全主体责任监督管理规定的精神制定，旨在规范客运索道运营使用的合规性管理基本要求，推广合规管理制度，提高客运索道运营使用的安全水平。本文件规定了客运索道运营使用单位在运营使用过程中涉及的人员、设备、外部环境、风险分级管控和隐患排查治理、应急管理等方面的合规管理内容及要求。本文件的使用有助于客运索道运营使用合规性体系的建设和完善。 本文件由中国特种设备安全与节能促进会（以下简称“中特促进会”）负责解释，对于未经中特促进会书面授权或认可的其他机构对标准的宣贯或解释所产生的理解歧义和由此产生的任何后果，以及本文件使用方对于因本文件使用不当所产生的任何纠纷和损失，中特促进会将不承担任何责任。

Compliance management requirements for operational of passenger ropeways

ASTM F1292-22 操场设备使用区内表面材料的冲击衰减标准规范

1.1 This specification establishes minimum performance requirements for the impact attenuation of playground surfacing materials installed within the use zone of playground equipment. 1.2 This specification is specific to surfacing used in conjunction with playground equipment, such as that described in Specifications F1148, F1487, F1918, CSAZ614 (Canada), and SS457 (Singapore). 1.3 This specification establishes an impact attenuation performance criterion for playground surfacing materials; expressed as a critical fall height. 1.4 This specification establishes procedures for determining the critical fall height of playground surfacing materials under laboratory conditions. The laboratory test is mandatory for surfaces to conform to the requirements of this specification. 1.5 The laboratory test required by this specification addresses the performance of dry surfacing materials. 1.6 This specification also provides optional procedures to determine the critical fall height under wet or frozen test conditions, or both. 1.7 The critical fall height of a playground surfacing material determined under laboratory conditions does not account for important factors that have the potential to influence the 1 This specification is under the jurisdiction of ASTM Committee F08 on Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility of Subcommittee F08.63 on Playground Surfacing Systems. Current edition approved Dec. 1, 2022. Published December 2022. Originally approved in 1991. Last previous edition approved in 2018 as F1292 – 18ε1 . DOI: 10.1520/F1292-22. 2 U.S. CPSC Special Study. Injuries and Deaths Associated with Children’s Playground Equipment, April 2001. U.S. Consumer Product Safety Commission, Washington, DC. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 actual performance of installed surfacing materials. Factors that are known to affect surfacing material performance include but are not limited to aging, moisture, maintenance, exposure to temperature extremes (for example, freezing), exposure to ultraviolet light, contamination with other materials, compaction, loss of thickness, shrinkage, submersion in water, and so forth. 1.8 The impact attenuation specification and test methods established in this specification are specific to the risk of head injury. There is only limited evidence that conformance with the requirements of this specification reduces the risk of other kinds of serious injury (for example, long bone fractures). NOTE 1—The relative risk of fatality and of different degrees of head injury may be estimated using the information in Appendix X1, which shows the relationships between the Head Injury Criterion (HIC) scores of an impact and the probability of head injury. 1.9 This specification relates only to the impact attenuation properties of playground surfacing materials and does not address other factors that contribute to fall-related injuries. While it is believed that conformance with the requirements of this specification will reduce the risk of serious injury and death from falls, adherence to this specification will not prevent all injuries and deaths. 1.10 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.11 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.12 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

T/CPASE M023-2022 大型游乐设施运营使用合规管理基本要求

本文件依据《中华人民共和国特种设备安全法》、GB/T 35770—2022《合规管理体系 要求及使用指南》和市场监管总局关于特种设备使用单位落实安全主体责任相关监督管理规定的精神制定，旨在规范和推广大型游乐设施运营使用的合规性管理，提高大型游乐设施运行使用的安全水平。本文件规定了大型游乐设施在运营使用过程中所涉及的人员、设备、外部环境、风险分级管控和隐患排查治理、应急管理等方面的合规管理内容及要求。本文件的使用有助于大型游乐设施运营使用合规性管理体系的建设和完善。 本文件由中国特种设备安全与节能促进会（以下简称“中特促进会”）负责解释，对于未经中特促进会书面授权或认可的其他机构对标准的宣贯或解释所产生的理解歧义和由此产生的任何后果，以及本文件使用方对于因本文件使用不当所产生的任何纠纷和损失，中特促进会将不承担任何责任。

Compliance management requirements for operational of large-scale amusement device

CEN/TR 17842-1:2022 儿童游乐场设备 第1部分：对 EN 1176:2017 及其部分（2018-2019）解释请求的答复

The purpose of this document is to publish replies to requests for interpretations, to all parts of the EN 1176 series, which have been drafted by the interpretation panel and confirmed by CEN/TC136/SC1.

Playground equipment for children - Part 1: Replies to requests for interpretation of EN 1176:2017 and its parts (2018-2019)

22/30461589 DC BS EN 1176-1:2017 AMD1 游乐场设备和表面 第1部分：一般安全要求和测试方法

BS EN 1176-1:2017 AMD1. Playground equipment and surfacing. - Part 1. General safety requirements and test methods

DB41/T 2344-2022 观览车类游乐设施事故应急预案编制导则

Guidelines for the preparation of accident emergency plans for sightseeing car amusement facilities

T/ZZB C013-2022 动漫刀剑

本文件规定了动漫刀剑（以下简称刀剑） 的术语和定义、产品型式、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和安全性声明。 本文件适用于刀剑身由碳素钢类材料制造的用于动漫、表演等艺术用途的未开刃刀剑。 其他类型刀剑可参照执行。

Anime sword

ASTM F3158-22 与水相关娱乐骑乘或设备一起使用的用户运输输送机的标准实施规程

1.1 This practice applies to the classification, design, manufacture, construction, and operation of patron transportation conveyors, integral with the operation of water related amusement rides or devices as scoped in Practice F2376-21a. 1.2 This practice applies to conveyors used for patron loading/unloading or to transport patrons on rafts, tubes, or other vehicles. Loading, sequencing, transitioning, starting, and unloading conveyors that carry patrons are included in the scope of this practice. 1.3 This practice shall affect new conveying systems or major modifications of conveyors used in an amusement ride or attraction. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria. 1.5 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device

BS ISO 17842-2:2022 游乐设施和游乐设备的安全 操作与使用

1   Scope This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement rides and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations, and is concerned with the installing, assembly and disassembly, operating, handling, maintaining, repairing, modifying and inspecting of amusement devices , and is addressed to controllers , operators , attendants and inspection bodies . The following are not covered by this document (this list is not exhaustive): — grandstands; — construction site installations; — scaffolding; — removable agricultural structures; — simple coin-operated children's amusement devices ; — carrying up to three children, and recreational devices like waterslides or summer toboggan runs;

Safety of amusement rides and amusement devices. Operation and use

BS ISO 17842-3:2022 游乐设施和游乐设施的安全设计、制造、运行和使用检验要求

1   Scope This document specifies the minimum requirements necessary for the independent inspections of amusement devices designed, manufactured, operated and used according to ISO 17842‑1 and ISO 17842‑2.

Safety of amusement rides and amusement devices - Requirements for inspection during design, manufacture, operation and use

T/WZCH 005-2022 儿童友好城市公园游乐设施建设技术规范

4  分类　 5  建设原则　 5.1  安全性　 5.2  趣味性　 5.3  多样性　 5.4  自然性　 6  基本要求　 7  建设要求　 7.1  设计　 7.2  制造　 7.3  技术要求和试验方法　 7.4  标志和使用维保说明书　 7.5  施工与安装　 8  验收　 9  维护保养　

Technical specification for the construction of amusement ride in child-friendly urban park