97.200.40 游乐场 标准查询与下载

ASTM F2376-22 水滑道系统的分类、设计、制造、施工和操作的标准实施规程

1.1 This practice applies to the classification, design, manufacture, construction, major modification, and operation of water slide systems. Water slide systems shall be defined as rides intended for use by riders in bathing attire where the action of the ride involves possible and purposeful immersion of the rider’s body either in whole or in part in water, and uses circulating water to mobilize or lubricate the rider’s transportation along a purpose built path. This includes slides used with or without vehicles as defined below. The terms water slides, waterslides, and slides shall be considered equivalent when used in this practice. 1.1.1 Owner/operator requirements of this standard are required of all water slide systems regardless of date of construction. 1.1.2 The design, manufacture and construction of an existing water slide or portions of a water slide system unaffected by a major modification shall meet the standard requirements in existence at the time of the construction. 1.2 For the purposes of this practice, a water slide system includes: 1.2.1 The flume, 1.2.2 The water-circulation system, 1.2.3 The starting platform with associated means of access and egress, 1.2.4 The structural supports, 1.2.5 Vehicles or other aquatic accessories that are part of the water slide as defined by the manufacturer, and 1.2.6 Means of slide termination. 1.3 This practice shall not apply to: 1.3.1 Any water slides installed in private residences, 1.3.2 Water flume amusement rides where contact with water is merely incidental (for example, log flume rides, shoot-the-chutes), 1.3.3 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.3.4 Lazy river type attractions operating at constant elevation, constructed in the ground, 1.3.5 Inflatable water slides (constant air supply) that are mounted on land (refer to Practice F2374-21a for the requirements of these types of water slides), and 1.3.6 Inflatable water slides (captured air) that are floating on a body of water (refer to EN/ISO 25649-2017, parts 1 through 7). 1.4 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant, as defined in Terminology F747-21a, and the manufacturer provides: 1.4.1 A historical summary of the water slide, or major modification as defined in Terminology F747-21a, and 1.4.2 A statement that the design is service proven or previously compliant. Water slides and major modifications to water slides may qualify as previously compliant for five years following the date of publication of this practice. Thereafter, water slides and major modifications to water slides must qualify as service proven or meet the requirements of this practice. 1.4.3 Service proven or previously compliant designs shall comply with Section 4. 1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. NOTE 1—The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N. 1.6 This practice includes an Appendix, which provides additional information to enhance the user’s understanding of and application of the criteria presented in this practice, for example, rationale, background, drawings, interpretation, or commentary. The information in the Appendix shall not be considered a mandatory part of this practice. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1 This practice is under the jurisdiction of ASTM Committee F24 on Amusement Rides and Devices and is the direct responsibility of Subcommittee F24.70 on Water Related Amusement Rides and Devices. Current edition approved June 1, 2022. Published June 2022. Originally approved in 2006. Last previous edition approved in 2021 as F2376 – 21a. DOI: 10.1520/F2376-22. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems

GSO EN 1176-2:2022 游乐场设备和表面 第2部分：秋千的附加具体安全要求和测试方法

This European Standard specifies additional safety requirements for swings intended for permanent installation for use by children. Where the main play function is not swinging, the relevant requirements in this part of EN 1176 may be used, as appropriate. NOTE Recommendations on the design and siting of swings are given in Annex A.

Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings

GSO EN 1176-5:2022 游乐场设备和表面 第5部分：旋转木马的附加具体安全要求和测试方法

This document specifies additional safety requirements for carousels intended for permanent installation for use by children. Where the main play function is not rotating, the relevant requirements in this part of EN 1176 can be used, as appropriate. This document is not applicable to motor-driven carousels, fairground carousels or climbing drums.

Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels

GSO ISO 17842-1:2022 游乐设施和游乐设施的安全 第1部分：设计和制造

ISO 17824-1:2015 specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of the following: mobile, temporary or permanently installed machinery and structures, e.g. roundabouts, swings, boats, Ferris wheels, roller coasters, chutes, grandstands, membrane or textile structures, booths, stages, side shows, and structures for artistic aerial displays. These amusement devices are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Fixed grandstands, construction site installations, scaffolding, removable agricultural structures and simple coin operated children's amusement devices intended for up to 3 children are not covered. It can nevertheless be used in the design of any similar structural or passenger-carrying device.

Safety of amusement rides and amusement devices — Part 1: Design and manufacture

GSO EN 1176-7:2022 游乐场设备和地面 第7部分：安装、检查、维护和操作指南

This document is applicable to playground equipment, surfacing and ancillary items, eg., gates, fences, benches, bins, shades, etc. Note 1 The scope of the inspection and inclusion of the ancillary items will vary from country to country Note 2 Ancillary items are not included in EN 1176 and are not assessed for compliance with EN 1176. This document establishes requirements on the installation, inspection, maintenance and operation of playground equipment and surfacing around the equipment. It is intended for use by playground operators (see definitions 3.4) to assist them in developing an inspection and maintenance regime for each playground.

Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation

ISO 17842-2:2022 机动游戏机和游乐设备的安全.第2部分:操作和使用

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement rides and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations, and is concerned with the installing, assembly and disassembly, operating, handling, maintaining, repairing, modifying and inspecting of amusement devices, and is addressed to controllers, operators, attendants and inspection bodies. The following are not covered by this document (this list is not exhaustive): — grandstands; — construction site installations; — scaffolding; — removable agricultural structures; — simple coin-operated children's amusement devices; — carrying up to three children, and recreational devices like waterslides or summer toboggan runs; — playground equipment; — rope courses; — climbing walls; — inflatable trampolines and swimming pool equipment.

Safety of amusement rides and amusement devices — Part 2: Operation and use

ISO 17842-3:2022 机动游戏机和游乐设备的安全第3部分:设计、制造、操作和使用期间的检查要求

This document specifies the minimum requirements necessary for the independent inspections of amusement devices designed, manufactured, operated and used according to ISO 17842-1 and

Safety of amusement rides and amusement devices — Part 3: Requirements for inspection during design, manufacture, operation and use

T/CMES 37002-2022 景区玻璃类游乐和观景设施建造单位 能力条件要求

本文件规定了景区玻璃类游乐和观景设施（以下简称“玻璃类设施”）的建造单位的通用要求，以及其文件适用于玻璃水滑道、玻璃悬索桥、玻璃栈道、玻璃观景台等景区玻璃类设施的设计、制造和安装单位。

Requirements for the ability of construction units of glass amusement and viewing facilities in scenic spots

ISO/TR 24666:2022 体育和娱乐设施.游乐场设备上的陷阱/缠结探测.数据收集

Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data

T/CMES 37001-2022 小型游乐设施制造单位能力条件要求

本标准规定了小型游乐设施制造单位的基本要求、资源条件要求和质量保证体系要求。 本标准适用于小型游乐设施（包括无动力类和机电类）制造单位。

Requirements for the capacity conditions of small amusement facilities manufacturing units

ASTM F1148-22 家庭游乐场设备的标准消费者安全性能规范

1.1 This consumer safety specification provides safety requirements for various types of home playground equipment intended for use by children aged from over 18 months through 10 years. It further provides such requirements for swings intended specifically for toddlers. Different age limits for various requirements are found in this specification. These limits reflect the nature of the hazards and the expected mental or physical ability, or both, of the child to cope with the hazards. 1.2 Home playground equipment is defined as any product in which the support structure remains stationary while the activity is taking place and is intended for a child to perform any of the following activities: climbing, swinging, sliding, rocking, spinning, crawling, or creeping, or combination thereof. Fitness equipment is specifically excluded unless attached to the play equipment. This specification is not intended to apply to juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds, or furniture (including outdoor furniture, such as picnic tables, cradle rockers, activity centers being used as walker substitutes, bouncers, jumpers, infant carriers, and products specifically designed for therapeutic use). This specification is not intended to apply to equipment to be used in places of public assembly such as schools, nurseries, day-care centers, and parks. Equipment intended to be in child-care centers in private homes is not exempt from the requirements of this specification. Such centers are defined as situations in which the child-care provider does not care for more than six children under the age of ten that are not residing in the household of the caregiver, and the total number of children under the age of ten does not exceed ten, including the caregiver’s own children. Electrically operated constant air inflatable devices are exempted from the requirements of this specification. Free standing play houses are exempt from this standard where the intent is that the child is standing or seated with their feet on the ground with no climbing, sliding, or swinging activities. 1.3 Methods of identifying products that comply with this consumer safety specification are given. The illustrations of home playground equipment shown in Figs. A1.1-A1.4 are for informational purposes only and are not intended to limit or endorse certain types of playground equipment or equipment features. These illustrations are not intended to limit the variety or various combinations of equipment that are covered by this consumer safety specification. 1.4 The purpose of this specification is to reduce the likelihood of life-threatening or debilitating injuries. 1.5 If toy accessories or toy chests are attached to home playground equipment, they are applicable to this consumer safety specification and to any other applicable safety standards. NOTE 1—See Annex A1 for figures referenced throughout this consumer safety performance specification. 1.6 General Measures, Tolerances, and Conversions: 1.6.1 The general tolerances for this specification (unless otherwise specified) are as follows: Dimension Tolerance X in. ±0.5 in. X.X in. ±0.05 in. X.XX in. ±0.005 in. Angle: ± 1° Force in N: ±1.125 lbf (±5 N) Weight in lbs: 220 lb (100 kg) ±2 lb (0.90 kg) These tolerances apply to all dimensions unless otherwise stated or when listed using terms like greater than, less than, minimum, or maximum are used. 1.6.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only. 1.6.3 The metric conversion factors: inch (in.) to millimetre (mm): 1 in. = 25.4 mm pound (lb) to kilogram (kg): 1 lb = 0.45359 kg pound-force (lbf) to newton (N): 1 lbf = 4.4482 N 1.6.4 See Annex A1 for figures referenced throughout this specification. 1.7 This consumer safety performance specification includes the following sections: Scope Section 1 Referenced Documents Section 2 1 This specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.09 on Home Playground Equipment. Current edition approved March 1, 2022. Published March 2022. Originally approved in 1988. Last previous edition approved in 2021 as F1148 – 21. DOI: 10.1520/F1148-22. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Terminology Section 3 Materials and Manufacture Section 4 General Requirements Section 5 Performance Requirements Section 6 Requirements for Access Section 7 Equipment Section 8 Equipment Layout Section 9 Installation Section 10 Structural Integrity Section 11 Maintenance Instructions Section 12 Labeling and Signage Section 13 Information Section 14 Keywords Section 15 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Performance Specification for Home Playground Equipment

DB3204/T 1028-2022 大型游乐设施安全使用管理规范

本文件适用于常州市范围内的排水户污水排入城镇污水管网排放口的设置，既有排水户排放口的规范化整治，以及新建、扩建排水户排放口的规范化建设。

Management specifications for the safe use of large amusement facilities

ISO 24667:2022 体育和娱乐设施.冲击表面试验装置

This document gives the specifications for impact attenuation testing equipment used to evaluate the impact performance characteristics of playground surfacing. The specifications are aimed at ensuring that developers and manufacturers of such instruments meet minimum performance characteristics to allow repeatable, reproducible and accurate results. This document does not specify a test method. NOTE Such test methods are covered in other standards, e.g. EN 1177, ASTM F1292, ASTM F3313, AS 4422, CSA Z614.

Sports and recreational facilities — Impact surfacing testing device

22/30444347 DC BS EN 1177 AMD1 缓冲冲击的操场表面 测定冲击衰减的试验方法

BS EN 1177 AMD1. Impact attenuating playground surfacing. Methods of test for determination of impact attenuation

22/30402959 DC BS ISO 17842-1 游乐设施和游乐设备的安全 第 1 部分：设计和制造

BS ISO 17842-1. Safety of amusement rides and amusement devices - Part 1. Design and manufacture

DB45/T 2414-2021 智能驾驶游览车技术条件

Technical conditions for intelligent driving tour bus

DB65/T 4484-2021 大型游乐设施使用管理及维护保养规则

Rules for the use, management and maintenance of large amusement facilities

DB31/T 914.3-2021 小型游乐设施安全 第3部分：运营管理要求

Safety of Small Amusement Facilities Part 3: Operational Management Requirements

DB31/T 914.2-2021 小型游乐设施安全 第2部分：安装要求

Safety of Small Amusement Devices Part 2: Installation Requirements

PN-EN 1176-7-2020-09 P 游乐场设备和铺面 第7部分：安装、检查、维护和运行指南

Playground equipment and surfacing--Part 7: Guidance on installation, inspection, maintenance and operation