A52 长度计量 标准查询与下载

JJG 283-2007 正多面棱体检定规程

本规程适用于正多面棱体首次检定、后续检定和使用中检验。

Angular Polygon

JJG 830-2007 深度指示表检定规程

本规程适用于分度值 / 分辨力为 0.01mm，0.005mm，0.001mm，测量范围上限不 大于 300mm 的深度指示表的首次检定、后续检定和使用中检验。

Depth Dial Gauge

DIN 7150-2 Berichtigung 1:2007 产品几何量技术规范(GPS).极限和配合体系.第2部分:平面圆柱工件用极限量规和测量.DIN 7150-2-2007-02的技术勘误

Geometrical product specifications (GPS) - System of limits and fits - Part 2: Limit gauges and gauging for plain cylindrical workpieces, Corrigenda to DIN 7150-2:2007-02

JJG 194-2007 方箱检定规程

本规程适用于铸铁方箱和岩石方箱的首次检定、后续检定和使用中的检验。

Box Plates

JJG 472-2007 多齿分度台检定规程

本规程适用于多齿分度台的首次检定、后续检定和使用中检验。

Precise Angle Dividing Table

NAVY QPL-81852-9 NOTICE 1-2007 AAU-32/A编码测高仪

The preparing activity above was responsible for this document as of the date shown above. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

ALTIMETER ENCODER AAU-32/A

NAVY QPL-81851-8 NOTICE 1-2007 AAU-31/A型测高仪

QPL-81851-8, which identified products qualified under the requirements specified in MIL-A-81851, has been transformed to an equivalent qualification data set (QDS).

ALTIMETER AAU-31/A

ISO/TR 9824:2007 水文测量学.封闭管道中自由表面流动的测量

This Technical Report provides a synopsis of the methods of flow gauging that can be deployed in closed conduits flowing part full, i.e. with a free open water surface. It provides a brief description of each method with particular reference to other International Standards where appropriate, the attributes and limitations of each technique, possible levels of uncertainty in the flow determinations and specific equipment requirements. The uncertainties quoted herein are expanded uncertainties with a coverage factor of 2 and an approximate confidence level of 95 %.

Hydrometry - Measurement of free surface flow in closed conduits

JIS B 0680:2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度

この規格は，製品の規格特性仕様及び検証に用しいる漂準温度について規定する。注記 この規格の対応国際規格及びその対応の程度を表す記号を，次に示す。なお，対応の程度を表す記号(IDT)は，ISO/1EC Guide 21に基づき，一致していることを示す。

Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification

ASME B89.7.3.2-2007 尺寸测量不确定度评定指南(技术报告)

This Technical Report provides a simplified approach for evaluation of dimensional measurement uncertainty; the method is consistent with "The Guide to Expression of Uncertainty in Measurement(GUM)." These guidelines address the evaluation of dimensional measurement uncertainty. Emphasis is placed on simplified methods appropriate for the industrial practitioner. The introductory methods presented are consistent with the Guide to the Expression of Uncertainty in Measurement (GUM), the nationally and internationally accepted method to quantify measurement uncertainty. The use of these guidelines does not preclude more advanced methods to be employed in the uncertainty evaluation process.

Guidelines for the Evaluation of Dimensional Measurement Uncertainty

JJG 202-2007 自准直仪检定规程

本规程适用于光电自准直仪、光学自准直仪、平直度检查仪的首次检定、后续检定和使用中的检验。

Autocollimators

JJG 63-2007 刀口形直尺检定规程

本规程适用于刀口形直尺的首次检定、后续检定和使用中检验。

Straight Edge

ASME MFC-3M ADD-2007 用孔口、管接头和文丘里管测量管道中的液体流量.勘误

This is the first Addenda to be published to ASME MFC-3M–2004.Following approval by the ASME MFC Standards Committee and ASME, and after public review,MFC-3Ma–2007 was approved by the American National Standards Institute on October11, 2007.Addenda to the 2004 edition of ASME MFC-3M–2004 are issued in the form of replacement pages.Revisions, additions, and deletions are incorporated directly into the affected pages. It is advisable,however, that this page, the Addenda title and copyright pages, and all replaced pages beretained for reference.

Measurement of Fluid Flow in Pipes Using Orifice@ Nozzle@ and Venturi

ASME MFC-16-2007 用电磁流量计测量封闭管路中的液体流量

This Standard applies to AC and pulsed-DC type industrial electromagnetic flowmeters with either wetted or non-wetted electrodes, and to the applications of these flowmeters to the measurement of the volumetric flowrate of electrically conducting and electrically homogeneous liquids or slurries flowing in a completely filled closed conduit. It specifically does not apply to insertion or medical type electromagnetic flow meters. It also does not cover applications of industrial flowmeters involving nonconductive liquids or highly conductive liquids (i.e., liquid metals). This document contains a discussion of the theory and measurement technique of electromagnetic flowmeter, a physical description of the various types available, application considerations, specifications as to what equipment markings should reside on the meter, and liquid calibration procedures.

Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters

ANSI/ASME MFC-16M-2007 用电磁流量计法测量封闭管道中流体流量

This Standard is applicable to industrial electromagnetic flowmeters and their application in the measurement of liquid flow. The electromagnetic flowmeters covered by this Standard utilize an alternating electrical current (AC) or pulsed direct-current (pulsed-DC) to generate a magnetic field in electrically conductive and electrically-homogeneous liquids or slurries flowing in a completely filled, closed conduit. This Standard specifically does not cover insertion-type electromagnetic flowmeters, meters used to measure flow in partially filled pipe, or those used in surgical, therapeutic, or other health and medical applications. It also does not cover applications of industrial flowmeters involving nonconductive liquids or highly conductive liquids (e.g., liquid metals).

Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters

JJG 646-2006 移液器检定规程

本规程适用于移液器的首次检定、后续检定和使用中的检验。

Verification Regulation of Locomotive Pipette

JJG 196-2006 常用玻璃量器检定规程

本规程适用于新制造和使用中的滴定管、分度吸量管、单标线吸量管、单标线容量瓶、量筒、量杯等常用玻璃量器（以下统称玻璃量器）的首次检定、后续检定和使用中的检验。

Verification regulation of Working Glass Container

JJG 558-2006 饮用量器检定规程

本规程适用于饮用量器的定型鉴定、首次检定和使用中检验。

Verification Regulation of Measure for Drinking

JJG 615-2006 售油器检定规程

本规程适用于零售食用油售油器的首次检定、后续检定和使用中检验。

Verification Regulation of Retail Appliance for Vegetable Oil

JJG(铁道) 191-2006 铁路轨道检查仪

本规程适用于各种通过电子、传感技术动态测量，并自动记录标准轨距铁路轨道静态几何参数的铁路轨道检查仪（以下简称“轨检仪”）的首次检定、后续检定和使用中检验。

Inspecting Instrument for Static Geometry Parameter of Track