A83 包装方法 标准查询与下载

GB/T 15171-1994 软包装件密封性能试验方法

本标准规定了软包装件密封性能的试验方法。 本标准适用于各种材料制成的密封软包装件试验。

Test method for leaks in sealed flexible packages

GB/T 14745-1993 包装 缓冲材料 蠕变特性试验方法

本标准规定了包装用缓冲材料蠕变特性试验方法。 本标准适用于板状的包装缓冲材料。

Packaging. Cushioning materials. Test method for creep properties

GB/T 14447-1993 塑料薄膜静电测试方法 半衰期法

本标准规定了在实验室条件下，以电晕放电形式使塑料薄膜带电后，其静电半衰期（以下简称“半衰期”）的测试方法。 本标准适用于塑料薄膜，其他绝缘材料制成的薄膜也可参照采用。

Test method for electrostatic properties of plastic films. Half-life method

GB/T 4857.2-1992 包装 运输包装件 温湿度调节处理

本标准规定了运输包装件进行温湿度调节处理的条件、设备、程序及试验报告。 本标准适用于运输包装件进行基本试验时的温湿度调节处理。

Packaging Transport packages Temperature and humidity conditioning

GB/T 4857.4-1992 包装 运输包装件 压力试验方法

本标准规定了对运输包装件进行压力试验时所用试验设备的主要性能要求、试验程序及试验报告的内容。 本标准适用于评定运输包装件在受到压力时的耐压强度及包装对内装物的保护能力。它既可以作为单项试验，也可以作为一系列试验的组成部分。

Packaging Transport packages Compression test method

GB/T 4857.7-1992 包装 运输包装件 定频正弦振动试验方法

本标准规定了对运输包装件进行正弦定频振动试验时所用试验设备的主要性能要求、试验程序及试验报告的内容。 本标准适用于评定运输包装件在正弦定频振动情况下的强度及包装对内装物的保护能力。它既可以作为单项试验，也可以作为一系列试验的组成部分。

Packaging Transport packages Sinusoidal vibration test method at constant frequency

GB/T 4857.8-1992 包装 运输包装件 六角滚筒试验方法

本标准规定了运输包装件进行六角滚筒试验时所用试验设备的主要性能要求、试验程序及试验报告的内容。 本标准适用于评定运输包装件在流通过程中所受到的反复冲击碰撞的适应能力及包装对内装物的保护能力。它既可以作为单项试验，也可以作为一系列试验中的组成部分。本标准主要适用于直方体或相似形状的运输包装件，其他形状的运输包装件可参考本标准进行试验。 本标准不适用于最大边与最小边尺寸之比大于5，或最大边尺寸超过1200mm，或质量超过270kg的运输包装件。

Packaging Transport packages Method of revolving hexagonal drum test

GB/T 4857.9-1992 包装 运输包装件 喷淋试验方法

本标准规定了对运输包装件进行喷淋试验时所用试验设备的主要性能要求、试验程序及试验报告的内容。 本标准适用于评定运输包装件对淋雨的抗御性能及包装对内装物的保护能力。它既可以作为单项试验，也可以作为系列试验的组成部分。

Packaging-Complete filled transport packages--Water spray test

GB/T 4857.1-1992 包装 运输包装件 试验时各部位的标示方法

本标准规定了运输包装件（以下简称包装件）在进行试验时标示部位的方法。 本标准适用于标示包装件，标示包装容器亦可参照使用。

Packaging--Complete filled transport packages--Identification of parts when testing

GB/T 8171-1987 使用缓冲包装材料进行的产品机械冲击脆值试验方法

本标准规定了在机械冲击作用下测定产品脆值的试验方法，试验时使用缓冲材料控制传递到产品上的冲击力。本试验获得的脆值可用于产品的缓冲包装设计及产品的修正设计。

Test method for mechanical shock fragility rating of products--Using package cushioning materials

GB/T 8166-1987 缓冲包装设计方法

本标准规定了在流通过程中为保护产品而实施的缓冲包装设计的方法。 本标准主要适用于使用非线性弹性材料的缓冲包装方法，不适用于弹簧吊装形式的包装方法。

Package cushioning design method

JIS Z 0202:2017 包装货物跌落试验方法

Method of drop test for packaged freights

DIN EN ISO 13355:2017 包装.满装的运输包装和单元货物.随机垂直振动试验(ISO 13355-2016);德文版本EN ISO 13355-2016

Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2016); German version EN ISO 13355:2016

DIN 55445-1:2017-01 包装试验.缝袋试验.第1部分:纸袋胶接缝耐久性的测定

Packaging test - Testing of seams of sacks - Part 1: Determination of endurance of seams of paper sacks

ASTM D4919-17 有害物质(危险品)包装试验的标准指南

4.1 The UN performance tests are based on the degree of hazard presented by the proposed hazardous material(s) to be packaged. 4.2 Substances and articles which are hazardous are assigned to a specific packing group as defined in 3.8.1 and may be determined by referencing 49 CFR 172.101 hazardous materials table. 4.3 Only packaging designs that have been successfully tested to the UN performance standards as defined in 3.8.2 may be marked with a UN mark. Hazardous Materials may not be transported in a packaging that does not bear the appropriate UN markings unless otherwise authorized by the applicable competent authority. 4.4 Packages successfully tested to the UN performance standards may or may not withstand the North American distribution environment. To further evaluate the suitability of the package it is strongly recommended that additional tests as detailed in Practice D4169 or other carrier specified test requirements be conducted. 1.1 The main focus of this guide is to identify the key information required for United Nations (UN) packaging certification to ensure the selected packaging will be certified to the appropriate level for its intended use. This document also provides guidance for locating relevant sections of the United States Department of Transportation Title 49 Code of Federal Regulations (CFR). Consult with a regulatory specialist whenever needed. 1.2 This guide is intended to assist in determining the appropriate performance tests required to certify packaging designs to the United States Department of Transportation Title 49 Code of Federal Regulations performance oriented packaging standards based on the United Nations Recommendations on the Transport of Dangerous Goods.. 1.3 This guide covers the testing for transportation of hazardous materials packagings for net masses not exceeding 400 kg (880 lb) or capacities not exceeding 450 L (119 gal), excepting packagings for infectious substances, radioactive materials, cylinders and other receptacles for gases. 1.4 This guide does not replace domestic or international regulatory requirements for hazardous materials packaging but is strongly recommended to be used in conjunction with those regulations. 1.5 The user of this guide must be trained in accordance with the United States Department of Transportation Title 49 Code of Federal Regulations (49 CFR) as required by 172.700 and should be familiar with other applicable hazardous materials regulations such as: International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the International Maritime Dangerous Goods Code (IMDG Code) and carrier rules such as International Air Transport Association (IATA) Dangerous Goods Regulations. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parent......

Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings

ISO 19709-1:2016 运输包装. 小负荷集装箱系统. 第1部分: 常规要求和试验方法

Transport packaging - Small load container systems - Part 1: Common requirements and test methods

DIN 55445-3:2016-09 包装试验.缝袋试验.第3部分:评价方法

Packaging test - Testing of seams of sacks - Part 3: Evaluation method

DIN 55445-2:2016-09 包装试验.缝袋试验.第2部分:塑料袋缝口耐久性的测定

Packaging test - Testing of seams of sacks - Part 2: Determination of endurance of seams of plastics sacks

DIN EN 862:2016 包装.防止儿童打开的包装.非药物用不可再封闭的包装要求和试验过程.德文版本EN 862-2016

Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2016

ISO 13355:2016 包装.满装的运输包装和单元货物.随机垂直振动试验

This International Standard specifies a method to carry out a vertical random vibration test on a complete, filled transport package(s) and unit loads using random excitation1). This document also provides methods for assessing the performance of a package in terms of its strength or the protection that it offers to its contents when it is subjected to vertical vibration. The test discussed in this document can be performed either as a single test to investigate the effects of vertical vibration, or as a part of a sequence of tests designed to measure the ability of a test specimen to withstand a distribution system that includes a vibration hazard. NOTE In this International Standard, a package or unit load is referred to as test specimen.

Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test