C82 防火技术 标准查询与下载

KS B ISO 14520-9:2007 气体灭火系统.物理特性和系统设计.第9部分:HFC 227ea灭火剂

이 규격은 HFC 227ea 소화약제와 관련된 가스계 소화설비의 특정 요건을 포함하고 있으

Gaseous fire-extinguishing systems－Physical properties and system design－Part 9：HFC 227ea extinguishant

KS B ISO 14520-6:2007 气体灭火系统.物理特性和系统设计.第6部分:HCFC混合A的灭火剂

이 규격은 HCFC Blend A 소화약제와 관련된 가스계 소화설비의 특정 성능 요건을 규

Gaseous fire-extinguishing systems－Physical properties and system design－Part 6：HCFC Blend A extinguishant

DIN 18232-2:2007 烟雾和热控制系统.第2部分:自然烟雾和排热通风机.设计、要求和安装

Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators; design, requirements and installation

DIN EN 13501-1:2007 建筑产品和建筑物构件的火灾分类.第1部分:着火试验反应的数据分类

This European Standard provides the reaction to fire classification procedure for all costruction procucts,including products incorporated withing elements. Products are considered in relatinv to their end use application. This document applies to three categories,which are teeated separately in this European Standared: - construction products,excluding floorings and linear pipe thermal insulation products; - floorings; - linear pire thermal insulation products. NOTE The treatment of some families of products is still under review and can necessitate amendments to this European Standard(see European Commission Decision 2000/147/EC).

Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests; German version EN 13501-1:2007

ISO/TS 19700:2007 分控制的等值比方法测定燃烧流出物有害成分

ISO/TS 19700:2007 describes a tube-furnace method for the generation of fire effluent for the identification and measurement of its constituent combustion products, in particular, the yields of toxic products under a range of fire decomposition conditions. The test method described in ISO/TS 19700:2007 can be used solely to measure and describe the properties of materials, products or systems in response to heat or flame under controlled laboratory conditions. It is not suitable to be used by itself for describing or appraising the fire hazard of materials, products or systems under actual fire conditions, or as the sole source on which regulations pertaining to toxicity can be based.

Controlled equivalence ratio method for the determination of hazardous components of fire effluents

ISO/TR 16312-2:2007 火灾危险和风险评估用获取燃烧馏出物毒性数据的物理防火模型有效性评价指南.第2部分:评估独立的物理防火模型

ISO/TR 16312-2:2007 assesses the utility of physical fire models that have been standardized, are commonly used and/or are cited in national or international standards, for generating fire effluent toxicity data of known accuracy. It does so using the criteria established in ISO/TR 16312-1 and the guidelines established in ISO/TR 19706. The aspects of the models that are considered are the intended application of the model, the combustion principles it manifests, the fire stage(s) that the model attempts to replicate, the types of data generated, the nature and appropriateness of the combustion conditions to which test specimens are exposed and the degree of validity established for the model.

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 2: Evaluation of individual physical fire models

UL 1500 BULLETIN-2007 船用产品防点燃试验UL安全性标准.评议提交截止日期:2007年3月1日

This test procedure covers the basic test methods for determining ignition-protection and is not to be considered as a test standard that will determine the acceptability of a product or component for use in marine service. The acceptability of a product or component in the intended application is judged in accordance with applicable requirements and tests for that component or product.

UL Standard for Safety Ignition-Protection Test for Marine Products COMMENTS DUE: March 1, 2007

NFPA 80A-2007 建筑物受到外部火灾危害的防护用推荐实施规程

This recommended practice addresses separation distances between buildings to limit exterior fire spread based on exterior openings and other construction features.

Recommended Practice for Protection of Buildings from Exterior Fire Exposures Effective Date: 8/17/2006

ISO 16735:2006 火焰安全工程.控制代数方程要求.烟层

1.1 The requirements given in this International Standard govern the application of algebraic equation sets to the calculation of specific characteristics of smoke layer generated by fires. 1.2 This International Standard is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of algebraic equations. 1.3 This International Standard is arranged in the form of a templat, where specific information relevant to algebraic smoke layer equations is provided to satisfy the following types of general requirements: a) description of physical phenomena addressed by the calculation method; b) documentation of the calculation procedure and its scientific basis; c) limitations of the calculation method; d) input parameters for the calculation method; e) domain of applicability of the calculation method. 1.4 Examples of sets of algebraic equations meeting all the requirements of this International Standard are provided in separate annexes for each different type of smoke layer scenario. Annex A contains general information and conservation requirements for smoke layers and Annex B contains specific algebraic equations for calculation of smoke layer characteristics.

Fire safety engineering - Requirements governing algebraic equations - Smoke layers

BIP 2112-2006 审核引火安全系统.应试者评定和通过手动程序

The publication is designed to aid regulatory and enforcing authorities, and approved inspectors in England and Wales; fire safety professionals, designers and other interested parties in the wider fire safety community.

The audit of active fire safety systems - Practitioner's assessment and approval procedures manual

ISO 16736:2006 着火安全工程.控制代数方程的要求.天花板射流量

1.1 The requirements in this International Standard govern the application of explicit algebraic equation sets to the calculation of specific characteristics of ceiling jet flows. 1.2 This International Standard is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of explicit algebraic equations. 1.3 This International Standard is arranged in the form of a template, where specific information relevant to algebraic ceiling jet flows equations is provided to satisfy the following types of general requirements: a) description of physical phenomena addressed by the calculation method; b) documentation of the calculation procedure and its scientific basis; c) limitations of the calculation method; d) input parameters for the calculation method; e) domain of applicability of the calculation method. 1.4 Examples of sets of algebraic equations meeting all the requirements of this International Standard are provided in separate annexes to this International Standard for each different type of ceiling jet flow. Currently, there is one informative annex containing algebraic equations for quasi-steady state, axisymmetric ceiling jet

Fire safety engineering - Requirements governing algebraic equations - Ceiling jet flows

ISO 16737:2006 着火安全工程.控制代数方程的要求.排气流量

1.1 The requirements in this International Standard govern the application of algebraic equation sets to the calculation of specific characteristics of vent flows. 1.2 This International Standard is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of algebraic equations. 1.3 This International Standard is arranged in the form of a template, where specific information relevant to algebraic vent-flow equations is provided to satisfy the following types of general requirements: a) description of physical phenomena addressed by the calculation method; b) documentation of the calculation procedure and its scientific basis; c) limitations of the calculation method; d) input parameters for the calculation method; e) domain of applicability of the calculation method. 1.4 Examples of sets of algebraic equations meeting all the requirements of this International Standard are provided in separate annexes to this International Standard for each different type of vent-flow scenario. Currently, there is one informative annex containing general information and conservation relationships for vent flows and a second informative annex with specific algebraic equations for calculation of vent-flow characteristics.

Fire safety engineering - Requirements governing algebraic equations - Vent flows

ISO/TS 16733:2006 着火安全工程.点火设施的选择和火炉设计

This Technical Specification describes a methodology for the selection of design fire scenarios and design fires that are credible but conservative for use in deterministic fire safety engineering analyses of any built environment including buildings, structures or transportation vehicles. The selection of design fire scenarios is tailored to the fire-safety design objectives, and accounts for the likelihood and consequences of potential scenarios. The selection of design fires is also tailored to the fire-safety objectives and to ensuring credible but severe fire exposure conditions. While this Technical Specification provides more operational information on the selection of design fire scenarios and design fires than ISO/TR 13387-2I20!, it is not intended to replace ISO/TR 13387-2 within the self-consistent set of parts making up ISO/TR 13387.

Fire safety engineering - Selection of design fire scenarios and design fires

ISO 16734:2006 着火安全工程.控制代数方程的要求.排气流量

1.1 The requirements in this International Standard govern the application of explicit algebraic equation sets to the calculation of specific characteristics of fire plumes. 1.2 This International Standard is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of explicit algebraic equations. 1.3 This International Standard is arranged in the form of a template, where specific information relevant to algebraic fire plume equations is provided to satisfy the following types of general requirements: a) description of physical phenomena addressed by the calculation method; b) documentation of the calculation procedure and its scientific basis; c) limitations of the calculation method; d) input parameters for the calculation method; e) domain of applicability of the calculation method. 1.4 Examples of sets of algebraic equations meeting all the requirements of this International Standard are be provided in separate annexes to this International Standard for each different type of fire plume. Currently, there is one informative annex containing algebraic equations for quasi-steady state, axisymmetric fire plumes.

Fire safety engineering - Requirements governing algebraic equations - Fire plumes

ISO/TR 22898:2006 防火工程中建筑物用防火试验的效率评价

This Technical Report has been prepared in order to review whether the current ISO furnace-based fire resistance testing methods remain appropriate for establishing the performance of elements of structure when exposed to fully developed fire conditions in the context of a fire safety engineered strategy for a building. It identifies whether there is a difference between the data produced and the data required. Where there is, it reviews whether the test methods can be easily adapted to improve either the relevance of the test, or the output data, to make it more suitable for use in fire engineering applications. This Technical Report reviews the mechanisms and routes of fire spread and identifies the criteria used for these tests to aid simple comparison and compares them with the conditions that can lead to fire spread or a loss of tenability for people in reality.

Review of outputs for fire containment tests for buildings in the context of fire safety engineering

BS PD 6686:2006 关于与加工工业中的火灾和爆炸防护相关的指令、法规和标准的导则

This Published Document discusses the European Union (EU) and United Kingdom (UK) legislation intended to minimize the risk of fire and explosion in the process industries. It provides a comprehensive guide to the standards, draft standards and other documents that contain the technical, practical and organizational information to ensure compliance with EU Directives and UK regulations. This legislation specifies a risk assessment approach to dealing with fire and explosion hazards, so the procedures adopted in performing a risk assessment are used in this document as a framework with which to guide the reader to the information required to prepare the assessment. The fire and explosion hazards covered in this code arise from use in the workplace of dangerous substances, as defined in the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) [1], and combustible substances that do not fall under the DSEAR definition of Dangerous Substances but which are capable of burning and thus participating in a fire. NOTE 1 Fire and explosion hazards fall into two types in the process industries; those associated with the use of dangerous substances and the operation of equipment in explosive atmospheres, and those associated with chemical reaction hazards and uncontrolled exothermic reactions and decompositions. This Published Document concentrates on the first of these fire and explosion hazards. The second, although part of DSEAR [1], is not the subject of standards, but needs to be considered in the overall risk assessment. Although such topics are not comprehensively covered in this code, some further reading is listed in the bibliography. This Published Document is not applicable to the offshore industry or to the mining industry. It is not applicable to oxidizing substances or preparations, or to substances that are used or manufactured solely for their explosive properties. NOTE 2 Some further reading on such substances and preparations is listed in the bibliography. NOTE 3 This Published Document refers only to standards or other types of document that are published by recognized standards bodies. Some fire and explosion hazards, chemical reaction hazards, for example, are not the subject of standards, but need to be considered in the overall risk assessment. Although such topics are not comprehensively covered in this code some further reading is listed in the bibliography.

Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries

GA 603-2006 防火卷帘用卷门机

本标准规定了防火卷帘用卷门机(以下简称卷门机)的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 本标准适用于防火卷帘配套使用的卷门机。

Motors of fire resistant shutter

ANSI/NFPA 901-2006 防火安全数据和事故报告的分类标准

Identifies a common international language for the description of fire incidents and method for classifying fire protection data.

Standard Classifications for Incident Reporting and Fire Protection Data

UL SUBJECT 1724-2006 电路保护系统火灾试验调查大纲.发布编号:3

Outline of Investigation for Fire Tests for Electrical Circuit Protective Systems Issue Number: 3

Outline of Investigation for Fire Tests for Electrical Circuit Protective Systems Issue Number: 3

GA 587-2005 建筑消防设施的维护管理

本标准规定了维护管理建筑消防设施的技术要求，并提供了方法。 本标准适用于建筑消防设施的维护管理。

Maintenance for fire equipment in building