E94 海洋石油作业用设备 标准查询与下载

BS EN ISO 17078-2:2007 石油和天然气工业.钻井和生产设备.偏心轴的流控制装置

This part of ISO 17078 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration procedures. The installation and retrieval of flow-control devices is outside the scope of this part of ISO 17078. Additionally, this part of ISO 17078 is not applicable to flow-control devices used in centre-set mandrels or with tubingretrievable applications. This part of ISO 17078 does not include requirements for side-pocket mandrels, running, pulling, and kickover tools, and latches that might or might not be covered in other ISO specifications. Reconditioning of used flow-control devices is outside of the scope of this part of ISO 17078.

Petroleum and natural gas industries - Drilling and production equipment - Flow-control devices for side-pocket mandrels

BS EN ISO 15138:2008 石油和天然气工业 海上开采设备 供暖、通风和空气调节

ISO 15138:2007 specifies requirements and provides guidance for design, testing, installation and commissioning of heating, ventilation, air-conditioning and pressurization systems and equipment on all offshore production installations for the petroleum and natural gas industries that are new or existing, normally occupied by personnel, or not normally occupied by personnel; or fixed or floating but registered as an offshore production installation. For installations that can be subject to "Class" or "IMO/MODU Codes & Resolutions", the user is referred to HVAC requirements under these rules and resolutions. When these requirements are less stringent than those being considered for a fixed installation, then it is necessary that ISO 15138:2007, i.e. requirements for fixed installations, be utilized.

Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning

DIN EN ISO 13628-6:2008 石油和天然气工业.海底生产系统设计和操作.第6部分:海底生产控制系统(ISO 13628-6:2006)

This standard is applicable to design, fabrication, testing, installation and operation of subsea production control systems in the oil and natural gas exploration. It contains requirements to subsea production control systems. This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipemnt and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, this part of ISO 13628 can be used for equipment on multiple-well applications. This part of ISO 13628setablishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment. This part of ISO 13628contains various types of information related to subsea production control systems. They are -informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information ; -basic prescriptive data that shall be adhered to by all types of control system; -selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant; -optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor. In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from this part of ISO 13628 only the provisions needed for the application at hand. Failure to adopt a selsctive approach to the provisions contained herein can lead to overspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of this part of ISO 13628.

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006); English version EN ISO 13628-6:2006

IEC 61892-3:2007 移动式及固定式近海装置.电气设施.第3部分:设备

This part of IEC 61892 contains provisions for electrical equipment in mobile and fixed offshore units including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings, used in the offshore petroleum industry for drilling, processing and for storage purposes. This standard applies to equipment in all installations, whether permanent, temporary, transportable or hand-held, to a.c. installations up to and including 35 000 V and d.c. installations up to and including 750 V (a.c. and d.c. voltages are nominal values). This standard gives requirements to equipment, which is additional to the requirement given in the product standard for the relevant equipment. This standard does not apply to the electrical installations in rooms used for medical purposes or in tankers.

Mobile and fixed offshore units - Electrical installations - Part 3: Equipment

IEC 61892-6:2007 移动式及固定式近海装置.电气装置.第6部分:装置

This part of IEC 61892 contains provisions for electrical installation in mobile and fixed offshore units including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings, used in the offshore petroleum industry for drilling, processing and for storage purposes. It applies to all installations, whether permanent, temporary, transportable or hand-held, to a.c. installations up to and including 35 000 V and d.c. installations up to and including 750 V (a.c. and d.c. voltages are nominal values). This standard does not apply to electrical installations in rooms used for medical purposes, or in tankers.

Mobile and fixed offshore units - Electrical installations - Part 6: Installation

IEC 61892-7:2007 移动式及固定式近海装置.电气装置.第7部分:危险区域

This part of IEC 61892 contains provisions for hazardous areas classification and choice of electrical installation in hazardous areas in mobile and fixed offshore units, including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings, used in the offshore petroleum industry for drilling, processing and for storage purposes. It applies to all installations, whether permanent, temporary, transportable or hand-held, to a.c. installations up to and including 35 000 V and d.c. installations up to and including 750 V.(a.c. and d.c. voltages are nominal values). This standard does not apply to electrical installations in rooms used for medical purposes, or in tankers.

Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas

DIN EN ISO 19904-1:2007 石油天然气工业.浮动式海上结构.第1部分:单体船、半潜式平台与平台

This Standard contains for floating offshore structures monohulls, semi-submersibles and spars.#,,#

Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006); English version EN ISO 19904-1:2006

DIN EN ISO 13628-7:2007 石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统

This standard gives requirements and recommendations for the design, analysis, materials, fabrication testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.#,,#

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005); English version EN ISO 13628-7:2006

BS EN ISO 19903:2007 石油和天然气工业.海上固定混凝土结构

ISO 19903:2006 specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas industries, and specifically addresses the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures, the assessment of structures in service, and the assessment of structures for reuse at other locations.

Petroleum and natural gas industries - Fixed concrete offshore structures

BS EN ISO 19904-1:2006 石油和天然气工业.浮式海上结构.单体船、半潜水船和船柱

ISO 19904-1:2006 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support production, storage and/or offloading, drilling and production, production, storage and offloading, and drilling, production, storage and offloading.

Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars

ISO 19904-1:2006 石油和天然气工业.漂浮离岸设施.第1部分:单体船、半潜水船和轻甲板船

This part of ISO 19904 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: - production; - storage and/or offloading; - drilling and production; - production, storage and offloading; - drilling, production, storage and offloading. Its requirements do not apply to the structural systems of mobile offshore units (MOUs). These include, among others: - floating structures intended primarily to perform drilling and/or well intervention operations (often referred to as MODUs), even when used for extended well test operations; - floating structures used for offshore construction operations (e.g. crane barges or pipelay barges), for temporary or permanent offshore living quarters (floatels), or for transport of equipment or products (e.g.transportation barges, cargo barges), for which structures reference is made to relevant recognized classification society (RCS) rules. Its requirements are applicable to all possible life-cycle stages of the structures defined above, such as - design, construction and installation of new structures, including requirements for inspection, integrity management and future removal, - structural integrity management covering inspection and assessment of structures in-service, and - conversion of structures for different use (e.g. a tanker converted to a production platform) or reuse at different locations. The following types of floating structure are explicitly considered within the context of this part of ISO 19904: a) monohulls (ship-shaped structures and barges); b) semi-submersibles; c) spars. In addition to the structural types listed above, this part of ISO 19904 covers other floating platforms intended to perform the above functions, consisting of partially submerged buoyant hulls made up of any combination of plated and space frame components and used in conjunction with the stationkeeping systems covered in ISO 19901-7. These other structures can have a great range of variability in geometry and structural forms and, therefore, can be only partly covered by the requirements of this part of ISO 19904. In other cases, specific requirements stated in this part of ISO 19904 can be found not to apply to all or part of a structure under design. In all the above cases, conformity with this part of ISO 19904 will require that the design is based upon its underpinning principles and achieves a level of safety equivalent, or superior, to the level implicit in it. This part of ISO 19904 is applicable to steel floating structures. The principles documented herein are, however, considered to be generally applicable to structures fabricated in materials other than steel.

Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars

DIN EN ISO 13628-2:2006 石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统(ISO 13628-2-2006)

This Standard contains unbonded flexible pipe systems for subsea and marine applications.

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006

NF M87-264-1:2006 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1 : metocean design and operating considerations.

BS EN ISO 13628-6:2006 石油和天然气工业.水下采油系统的设计和操作.水下生产控制系统

ISO 13628-6:2006 is applicable to design, fabrication, testing, installation and operation of subsea production control systems. ISO 13628-6:2006 covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, ISO 13628-6:2006 can be used for equipment on multiple-well applications. ISO 13628-6:2006 establishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment. ISO 13628-6:2006 contains various types of information related to subsea production control systems. They are informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information; basic prescriptive data that shall be adhered to by all types of control system; selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant; optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor. In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from ISO 13628-6:2006 only the provisions needed for the application at hand. Failure to adopt a selective approach to the provisions contained herein can lead to overspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of ISO 13628-6:2006.

Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems

DIN EN ISO 19901-1:2006 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究(ISO 19901-1-2005).英文版本EN ISO 19901-1:2005

This part of ISO 19901 contains metocean design and operating considerations for offshore structures.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005

DIN EN 10300:2006 近岸和海上管线用钢管和配件.外涂层用沥青热涂覆材料.德文版本 EN 10300-2005

This European Standard specifies requirements for the application of factory applied external bitumen based hot applied coatings for the corrosion protection of steel tubes and fittings for onshore and offshore pipelines. The coatings described in this standard can be applied to longitudinally or spirally welded tubes or to seamless tubes and fittings used for the construction of pipelines for the conveyance of liquids or gases.

Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating; English version of DIN EN 10300:2006-02

BS EN ISO 19901-1:2006 石油和天然气工业.海上建筑物的特殊要求.Metocean设计和运行研究

ISO 19901-1:2005 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries.

Petroleum and natural gas industries - Specific requirements for offshore structures - Metocean design and operating considerations

DIN EN 10298:2005 岸上和海底管路用钢管和管件.水泥灰浆内衬.德文版本EN 10298-2005

This European Standard specifies requirements for cement mortar linings for protecting the internal surface of steel tubes and pipeline components. It also specifies requirements for their application. It is applicable to the linings of tubes that have been welded longitudinally or spirally, seamless tubes and non-alloy steel components used for fluid transportation. This European Standard does not cover in situ applied or rehabilitation linings. This type of lining is used in particular in the transport and distribution, under pressure or by gravity, of water intended for human consumption and industrial use, and also in fire extinguishing and waste water systems. The temperature of the water transported should not exceed 50 ~C. Higher working temperature can be used by agreement of the parties. The constituent materials of cement mortar lining, when used under the conditions for which they are designed, in permanent or temporary contact with water intended for human consumption, shall not change the quality of that water to such an extent that it fails to comply with the requirements of European regulations. For this purpose, reference shall be made to the relevant national standards transposing EN standards when available, dealing with the influence of materials on water quality.

Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; English version of DIN EN 10298:2005

ISO 19901-7:2005 石油和天然气工业.海上建筑物的特殊要求.第7部分:浮动式海上建筑物和移动式海上设备用保持系统

This part of ISO 19901 specifies methodologies for a) the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support - production, - storage, - drilling, well intervention and production, - production and storage, - drilling, well intervention, production and storage, and b) the assessment of stationkeeping systems for site-specific applications of mobile offshore units (e.g. mobile offshore drilling units, construction units, and pipelay units). Most stationkeeping systems used with the class of floating structures covered by a) are termed “permanent mooring systems”, for which this part of ISO 19901 is applicable to all aspects of the life cycle and includes requirements relating to the manufacture of mooring components, as well as considerations for in-service inspections. Most stationkeeping systems used with mobile offshore units, the class covered by b), are termed“mobile mooring systems”. Throughout this document, the term “floating structure”, sometimes shortened to“structure”, is used as a generic term to indicate any member of the two classes, a) and b). This part of ISO 19901 is applicable to the following types of stationkeeping systems, which are either covered directly in this document or through reference to other guidelines: - spread moorings (catenary, taut-line and semi-taut-line moorings); - single point moorings, anchored by spread mooring arrangements; - dynamic positioning systems; - thruster-assisted moorings. Descriptions of the characteristics and of typical components of these systems are given in Annex A. The requirements of this part of ISO 19901 mainly address spread mooring systems and single point mooring systems with mooring lines composed of steel chain and wire rope. This document also provides guidance on the application of the methodology to synthetic fibre rope mooring systems, and includes additional requirements related to the unique properties of synthetic fibre ropes. The document applies to single anchor leg moorings (SALMs) and other single point mooring systems (e.g. tower soft yoke systems) only to the extent to which the requirements are relevant. The requirements of this document do not apply to the vertical moorings of tension leg platforms (TLPs). The methodology described in this part of ISO 19901 identifies a set of coherent analysis tools that, combined with an understanding of the site-specific metocean conditions, the characteristics of the floating structure under consideration, and other factors, can be used to determine the adequacy of the stationkeeping system to meet the document’s functional requirements.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units

ISO 19901-1:2005 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究

This part of ISO 19901 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided into two broad types: a) those that relate to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them; b) those that relate to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures. The environmental conditions and metocean parameters discussed comprise - extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure, - long-term distributions of metocean parameters, in the form of cumulative, conditional, marginal or joint statistics of metocean parameters, and - normal environmental conditions that are expected to occur frequently during the design service life of the structure. Metocean parameters are applicable to - the determination of actions and action effects for the design of new structures, - the determination of actions and action effects for the assessment of existing structures, - the site-specific assessment of mobile offshore units, - the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure), and - the operation of the platform, where appropriate.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations