E94 海洋石油作业用设备 标准查询与下载

KS B ISO 19901-4:2010 石油和天然气工业.海洋结构的特殊要求.第4部分:地基工程与基础设计注意事项

이 표준은 특정 구조물 형태가 아닌 모든 분야의 해양구조물에 해당하는 지구과학 및 기초공학

Petroleum and natural gas industries-Specific requirements for offshore structures-Part 4:Geotechnical and foundation design considerations

KS B ISO 19901-7:2010 石油和天然气工业.海洋结构的特殊要求.第7部分:浮式海上建筑物和移动式海上设备用保持系统

이 표준의 요구사항은 주로 강재 체인 및 와이어로프로 구성된 계선삭을 가지는 다점 계류 시

Petroleum and natural gas industries-Specific requirements for offshore structures-Part 7:Stationkeeping systems for floating offshore structures and mobile offshore units

KS B ISO 19901-2:2010 石油和天然气工业.海洋结构的特殊要求.第2部分:耐震设计规程和标准

이 표준은 내진설계 공정에 대한 정의와 해양구조물의 기준에 대한 요구사항을 담고 있으며,

Petroleum and natural gas industries-Specific requirements for offshore structures-Part 2:Seismic design procedures and criteria

KS B ISO 19901-5:2010 石油和天然气工业.海洋结构的特殊要求.第5部分:设计和施工过程中的重量控制

이 표준은 해양 환경에서의 구조물에 대한 건조 및 엔지니어링 작업 도중에 질량 제어에 의한

Petroleum and natural gas industries-Specific requirements for offshore structures-Part 5:Weight control during engineering and construction

KS B ISO 19901-1:2010 石油和天然气工业.海洋结构的特殊要求.第1部分:海洋气象设计与运用的注意事项

이 표준은 석유 및 천연가스 산업에서 사용되는 모든 형태의 해양구조물의 설계, 제작 및 사

Petroleum and natural gas industries-Specific requirements for offshore structures-Part 1:Metocean design and operating considerations

SY/T 10008-2010 海上钢质固定石油生产构筑物的腐蚀控制

本标准为海上钢制固定石油生产构筑物及有关的油气处理设备外部的腐蚀控制所需的最低要求提供了指南。固定构筑物包括平台、张力退平台、和水下基盘。本标准不包括用于石油生产临时系泊的可移动装置。 本标准中对构筑物的腐蚀控制分为三个区域：全浸区、飞溅区和大气区。各区分别论述。 本标准不包括附属于构筑物或建于构筑物上的油井、配管和有关设备的内腐蚀控制指南。 本标准不包括海底管道及其立管。

Corrosion control of steel fixed offshore structures associated with petroleum production

SY/T 10004-2010 海上平台管节点碳锰钢板规范

本标准包括两个级别的最大厚度达100mm（4in）的中等强度钢板，此类钢板适用于海洋结构物焊接结构指定的能抵抗冲击、塑性疲劳和层状撕裂的关键部位。这类钢板主要适用于按照API Spec 2B进行冷成型和焊接加工。 这类钢材主要用于管节点、带加强筋板的结构和其他交叉部位。 其缺口韧性要求适合于水下或气候温和地区的水上使用。

Specification for carbon manganese steel plate for offshore platform tubular joints

SY/T 6774-2010 海上结构调质钢板规范

本标准涵盖了用于海洋焊接结构的4个级别的中等强度的钢板，此类钢材适用于抵抗冲击、塑性疲劳荷载以及层状撕裂的关键部位。42,50和50T级别涵盖了厚度为150mm（6in）及以下钢板，60级别涵盖了厚度为100mm（4in）及以下钢板。

Specification for steel plates,quenched-and-tempered,for offshore structures

SY/T 6773-2010 海上结构热机械控轧（TMCP）钢板规范

本标准涵盖了用于海洋焊接结构的4个级别的中等强度的钢板，此类钢材适用于抵抗冲击、塑性疲劳荷载以及层状撕裂的关键部位。42,50和50T级别涵盖了厚度为150mm（6in）及以下钢板，60级别涵盖了厚度为100mm（4in）及以下钢板。

Specification for steel plates for offshore structures,produced by thermo-mechanical control processing(TMCP)

SY/T 10035-2010 钻井平台拖航与就位作业规范

本标准规定了海上移动式钻井平台的拖航和就位作业的基本要求。 本标准适用于我国海上移动式钻井平台为勘探、开采海洋油气资源而进行的拖航和就位作业。

MODU towing and positioning operation rule

BS EN ISO 13628-5:2009 石油和天然气工业 水下采油系统设计和操作 水下脐带管

This part of ISO 13628 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries. Ancillary equipment does not include topside hardware. Topside hardware refers to any hardware that is not permanently attached to the umbilical, above the topside hang-off termination. This part of ISO 13628 applies to umbilicals containing components, such as electrical cables, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination. This part of ISO 13628 applies to umbilicals for static or dynamic service, with surface-surface, surfacesubsea and subsea-subsea routings. This part of ISO 13628 does not apply to the associated component connectors, unless they affect the performance of the umbilical or that of its ancillary equipment. This part of ISO 13628 applies only to tubes with the following dimensions: wall thickness, t < 6 mm, internal diameter, ID < 50,8 mm (2 in). Tubular products greater than these dimensions can be regarded as pipe/linepipe and it is expected that they be designed and manufactured according to a recognised pipeline/linepipe standard. This part of ISO 13628 does not apply to a tube or hose rated lower than 7 MPa (1 015 psi). This part of ISO 13628 does not apply to electric cable voltage ratings above standard rated voltages U0/U(Um) = 3,6/6(7,2) kV rms, where U0, U and Um are as defined in IEC 60502-1 and IEC 60502-2.

Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals

NF M87-262-1*NF EN ISO 19904-1:2010 石油和天然气工业.漂浮海上结构物.第1部分:单体船、半潜水船和轻甲板船

Petroleum and natural gas industries - Floating offshore structures - Part 1 : monohulls, semi-submersibles and spars.

NF M87-208-7*NF EN ISO 13628-7:2009 石油和天然气工业.海底采油系统的设计和操作.第7部分:完井/修井立管系统

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7 : completion/workover riser systems.

DIN EN ISO 10418 Berichtigung 1:2009 石油和天然气工业.近海生产装置.基础表面操作安全系统的分析,设计,安装和测试(ISO 10418-2003).英文版本EN ISO 10418-2003,DIN EN ISO 10418-2005-07的勘误表.英文版本EN ISO 10418-2003/AC-2009

Petroleum and natural gas industries - Offshore production installations - Analysis, desgin, installation and testing of basic surface process safety systems (ISO 10418:2003); English version EN ISO 10418:2003, Corrigendum to DIN EN ISO 10418:2005-07; English version EN ISO 10418:2003/AC:2009.

Petroleum and natural gas industries - Offshore production installations - Analysis, desgin, installation and testing of basic surface process safety systems (ISO 10418:2003); English version EN ISO 10418:2003, Corrigendum to DIN EN ISO 10418:2005-07; Eng

DIN EN ISO 13628-2 Berichtigung 1:2009 石油和天然气工业.海底生产系统的设计和操作.第2部分:海底和海洋设施用未粘合软管系统(ISO 13628-2-2006).英文版本EN ISO 13628-2-2006.DIN EN ISO 13628-2-2006-10勘误表.英文版本EN ISO 13628-2-2006/AC-2009

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006, Corrigendum to DIN EN ISO 13628-2:2006-10; English version EN ISO 13628-2:2006/AC:2009

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006, Corrigendum to DIN EN ISO 13628-2

DIN EN ISO 15138:2008 石油和天然气工业.海上生产装置.加热、通风和空气调节

This International Standard specifies requirements and provides guidance for design, testing, installation and commissioning of heating, ventilation, air-conditioning and pressurization systems and equipment on all offshore production installations for the petroleum and natural gas industries that are new or existing, normally occupied by personnel or not normally occupied by personnel, I -- fixed or floating but registered as an offshore production installation. For installations that can be subject to "Class" or "IMO/MODU Codes & Resolutions", the user is referred to HVAC requirements under these rules and resolutions. When these requirements are less stringent than those being considered for a fixed installation, then it is necessary that this International Standard, i.e. requirements for fixed installations, be utilized.

Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007); English version EN ISO 15138:2007

DIN EN ISO 13703 Berichtigung 1:2008 石油和天然气工业.海上作业平台管道系统的设计和安装.技术勘误DIN EN ISO 13703-2003

Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002, Corrigendum to DIN EN ISO 13703:2003-06; German and E

ISO 10418:2003/cor 1:2008 石油和天然气工业.近海生产装置.基础表面操作安全系统的分析、设计、安装和测试.技术勘误1

This standard is about Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems; Technical Corrigendum 1

Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems; Technical Corrigendum 1

BS ISO 13628-11:2008 石油和天然气工业.水底生产系统的设计和运行.海底和海上设备用软管系统

This part of ISO 13628 provides guidelines for the design, analysis, manufacture, testing, installation and operation of flexible pipes and flexible pipe systems for onshore, subsea and marine applications. This part of ISO 13628 supplements ISO 13628-2 and ISO 13628-10, which specify minimum requirements for the design, material selection, manufacture, testing, marking and packaging of unbonded and bonded flexible pipe, respectively. This part of ISO 13628 applies to flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. Both bonded and unbonded pipe types are covered. In addition, this part of ISO 13628 applies to flexible pipe systems, including ancillary components. The applications covered by this part of ISO 13628 are sweet- and sour-service production, including export and injection applications. This part of ISO 13628 applies to both static and dynamic flexible pipe systems used as flowlines, risers and jumpers. This part of ISO 13628 does cover, in general terms, the use of flexible pipes for offshore loading systems. This part of ISO 13628 does not cover flexible pipes for use in choke and kill lines or umbilical and control lines.

Petroleum and natural gas industries. Design and operation of subsea production systems. Flexible pipe systems for subsea and marine applications

BS EN ISO 19902:2007+A1:2013 石油和天然气工业. 固定钢制海上构筑物

Petroleum and natural gas industries. Fixed steel offshore structures