F19 新能源及其他 标准查询与下载

ARP 062-7-3-2008 乡村电气化的小型更新能源和混合系统推荐标准.第7-3部分:发电机组.农村电气化系统用发电机组的选择

Specifies general requirements for the selection, sizing, erection and operation of generator sets in decentralized rural electrification systems. Applies to all low-voltage combustion engine electricity generator sets with a rated power up to 100 kVA,

Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set - Selection of generator sets for rural electrification systems

ARP 062-9-4-2008 乡村电气化的小型更新能源和混合系统推荐标准.第9-4部分:综合系统.使用者安装

Specifies general requirements for the design and implementation of a user's installation for the purpose of ensuring satisfactory operation, and the safety of persons and property. Applies to single-phase user's electrical installations with a maximum p

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-4: Integrated system - User installation

ARP 062-9-2-2008 农村电气化所使用的小型可再生能源及混合动力系统.第9.2部分:微网

Specifies general requirements for the design and implementation of microgrids used in decentralized rural electrification to ensure the safety of persons and property and their satisfactory operation according to the scheduled use.

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids

ARP 062-9-3-2008 农村电气化所使用的小型可再生能源及混合动力系统.第9.3部分:集成系统-用户界面

Specifies general requirements for the design and implementation of the interface equipment within the user's installation which connects to a microgrid or the generating part of a stand-alone system.

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-3: Integrated system - User interface

ARP 062-3-2006 农村电气化用小型可再生能源和混合系统的建议．第3部分：项目拓展和管理

Proposes a framework for project development and management and includes recommended information that should be taken into consideration during all the steps of the electrification project. Also provides information on the responsibilities involved in th

Recommendations for small renewable energy and hybrid systems for rural electrification Part 3: Project development and management

ARP 062-6-2006 农村电气化用小型可再生能源和混合系统的建议．第6部分：验收，运行，维护和替换

Intended to describe the various rules to be applied for acceptance, operation, maintenance and replacement of decentralized rural electrification systems which are designed to supply electric power for sites which are not connected to a large interconne

Recommendations for small renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement

ARP 062-5-2006 农村电气化用小型可再生能源和混合系统的建议．第5部分：电气危害防护

Specifies the general requirements for the protection of persons and equipment against electrical hazards to be applied in decentralized rural electrification systems.

Recommendations for small renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards

ARP 062-4-2006 农村电气化用小型可再生能源和混合系统的建议．第4部分：系统的选择和设计

Provides a method for describing the results to be achieved by the electrification system independently of the technical solutions that could be implemented.

Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and design

ARP 062-1-2005 农村电气化用小型可再生能源和混合系统的建议．第1部分：农村电气化的一般介绍

Provides a general introduction and recommendations for the selection, design, operation and maintenance of renewable energy and hybrid systems for rural electrification in areas too far from the normal electrical-grid.

Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural electrification

ARP 062-2-2005 农村电气化用小型可再生能源和混合系统的建议．第2部分：从电气化系统的要求到范围

Provides guidance on socio-economic studies to determine the needs for rural electrification systems and provides some structures as technical solutions to such needs. Proposes a range of renewable energy systems.

Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems

NY/T 667-2003 沼气工程规模分类

Classification of scale of methane engineering projects

NY/T 652-2002 民用轻烃混合燃气工程技术规范

Engineering specification for light hydrocarbon mixed fuel gas for civil use

DB62/T 476-1996 农村家用沼气池施工操作规程

本标准规定了弄农村家用沼气站施工操作技术。适用于按GB 4750-84《农村家用水压式沼气池标准图集》施工的沼气池工程。

Rural Household Biogas Digester Construction Operation Regulations

NY/T 12-1985 生物质燃料发热量测试方法

Testing methods for heat value of biomass fuels

ASTM E856-83(2004) 有关废弃物再生燃料的物理和化学性质术语和缩略语定义

Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel

ASTM E872-82(2006) 粒状木质燃料分析中挥发性物质的试验方法

The test procedures described in this test method can be used to determine the percentage of gaseous products, exclusive of moisture vapor, of any particulate wood fuel meeting the requirements specified in this test method.1.1 This test method determines the percentage of gaseous products, exclusive of moisture vapor, in the analysis sample of particulate wood fuel that is released under the specific conditions of the test. The particulate wood fuel may be sanderdust, sawdust, pellets, green tree chips, hogged fuel, or other type particulate wood fuel having a maximum particle volume of 16.39 cm3 (1 in.3). Volatile matter, when determined as herein described, may be used to indicate yields on processes to provide the basis for purchasing and selling or to establish burning characteristics.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels

ASTM E870-82(2006) 木材燃料分析的测试方法

These test methods of analysis described herein can be used for the proximate analysis, ultimate analysis, and the determination of the gross caloric value of wood fuels.1.1 These test methods cover the proximate and ultimate analysis of wood fuels and the determination of the gross caloric value of wood fuels sampled and prepared by prescribed test methods and analyzed according to ASTM established procedures. Test methods as herein described may be used to establish the rank of fuels, to show the ratio of combustible to incombustible constituents, to provide the basis for buying and selling, and to evaluate for beneficiation or for other purposes.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Analysis of Wood Fuels

ASTM E871-82(2006) 粒状木燃料湿度分析的标准试验方法

The test procedures described in this test method can be used to determine the total weight basis moisture of any particulate wood fuel meeting the requirements specified in this test method.1.1 This test method covers the determination of total weight basis moisture in the analysis sample of particulate wood fuel. The particulate wood fuel may be sanderdust, sawdust, pellets, green tree chips, hogged fuel, or other type particulate wood fuel having a maximum particle volume of 16.39 cm3 (1 in.3). It is used for calculating other analytical results to a dry basis. Moisture, when determined as herein described, may be used to indicate yields on processes, to provide the basis for purchasing and selling, or to establish burning characteristics.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Moisture Analysis of Particulate Wood Fuels