F40 核材料、核燃料综合 标准查询与下载

NB/T 25016.6-2013 核电厂常规岛设备监造技术导则.第6部分:给水加热器

本部分规定了核电厂常规岛给水加热器设备制造过程的监造要求。本部分适用于对核电厂常规岛给水加热器设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 6: Feed water heater

NB/T 25016.4-2013 核电厂常规岛设备监造技术导则.第4部分:凝汽器

本部分规定了核电厂常规岛凝汽器设备制造过程的监造技术要求。本部分适用于对核电厂常规岛凝汽器设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 4: Condenser

NB/T 25016.11-2013 核电厂常规岛设备监造技术导则.第11部分:输变电设备

本部分规定了核电厂输变电设备中油浸式电力变压器、SF气体绝缘金属封闭组合电器、发电机出口封闭母线制造过程的监造技术要求。本部分适用于对核电厂输变电设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 11: Transmission and transformation equipment

NB/T 25011-2013 核电厂水化学处理系统调试导则

本标准规定了核电厂水化学处理系统调试的工作内容和试验要求。本标准适用于压水堆核电厂水化学处理系统的调试,其他类型机组的水化学处理系统可参考执行。

Commissioning guideline for water chemical treatment system of nuclear power plant

NB/T 25016.12-2013 核电厂常规岛设备监造技术导则.第12部分:起吊设备

本部分规定了核电厂常规岛起吊设备制造过程的监造技术要求。本部分适用于对核电厂常规岛起吊设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 12: Lifting equipment

NB/T 25016.3-2013 核电厂常规岛设备监造技术导则.第3部分:发电机

本部分规定了核电厂常规岛发电机及其辅助设备制造过程的监造技术要求。本部分适用于对核电厂常规岛发电机及其辅助设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 3: Generator

NB/T 25016.7-2013 核电厂常规岛设备监造技术导则.第7部分:除氧器

本部分规定了核电厂常规岛除氧器设备制造过程的监造技术要求。本部分适用于对核电厂常规岛除氧器设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 7: Deaerator

NB/T 25016.2-2013 核电厂常规岛设备监造技术导则.第2部分:汽轮机

本部分规定了核电厂常规岛汽轮机及其辅助设备制造过程的监造技术要求。本部分适用于对核电厂常规岛汽轮机及其辅助设备制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 2: Steam turbine

NB/T 25016.10-2013 核电厂常规岛设备监造技术导则.第10部分:水泵

本部分规定了核电厂常规岛水泵制造过程的监造技术要求。本部分适用于对核电厂常规岛水泵制造过程实施的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 10: Pump

NB/T 25016.8-2013 核电厂常规岛设备监造技术导则.第8部分:管道

本部分规定了核电厂常规岛管道(包括管配件和管道预制,下同)制造过程的监造技术要求。本部分适用于对核电厂常规岛管道制造过程的监造。

Surveillance guide for conventional island equipment in nuclear power plants.Part 8: Pipe

KS A ISO 7195:2012 核能.六氟化铀(UF6)的运输包装

이 표준은 육불화우라늄(UF6)의 운반용기에 대한 요건을 명시하고 있다.이 표준은

Nuclear energy-Packaging of uranium hexafluoride(UF6) for transport

KS A ISO 27467:2012 核临界安全.假设临界事故的分析

이 표준은 잠재적인 임계사고를 해석하는 데 있어 중요한 분야를 규정한다.이 표준은

Nuclear criticality safety－Analysis of a postulated criticality accident

DIN 25472:2012 核燃料丢弃的最终处置的临界安全性

Criticality safety for final disposal of nuclear fuels to be discarded

EJ/T 20002-2011 原地爆破浸出采铀工艺设计规范

Specifications for design of uranium mining process by in-situ blasting and leaching

BS ISO 10276:2010 核能.燃料技术.放射性物质运输的包装用耳轴

Nuclear energy. Fuel technology. Trunnions for packages used to transport radioactive material

ANSI N15.36-2010 核材料控制方法用美国国家标准.测量控制程序.无损检测测量控制和保证

This standard is directed to the scientist or engineer, with appropriate technical training, who is responsible for establishing, maintaining, or supervising a measurement control program for nondestructive assay of nuclear materials. The measurement control program provides administration, evaluation, and control of the measurement process and ensures that the measurement process provides results of sufficient quality for facility operations.

American National Standard for Methods of Nuclear Material Control - Measurement Control Program - Nondestructive Assay Measurement Control and Assurance

ASTM C1284-10 α光谱测定法测定锕系元素电沉积性能的标准实施规程

The determination of actinide elements by alpha spectrometry measurement is an essential part of many environmental research, bioassay, and monitoring programs. Alpha spectrometry measurements identify and quantify the alpha-emitting actinide elements. A variety of separation methods will typically precede the electrodeposition of a sample for alpha spectrometry measurements. In addition to the electrodeposition procedure presented in this practice, the scientific literature contains other procedures for actinide electrodeposition. Note 18212;An alternate method for mounting actinides for alpha spectrometry measurements by coprecipitation with neodymium fluoride is described in Practice C1163.1.1 This practice covers the preparation of separated actinide fractions for alpha spectrometry measurement. It is applicable to any of the actinides that can be dissolved in dilute ammonium sulfate solution. Examples of applicable actinide fractions would be the final elution from an ion exchange separation or the final strip from a solvent extraction separation. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry

NF M60-464*NF ISO 21614:2009 UO2, (U, Gd)O2和(U, Pu)O2粉末和烧结芯块中碳含量的测定.高频感应炉内燃烧. 红外吸收光谱法

Determination of carbon content of UO2, (U, Gd)O2 and (U, Pu)O2 powders and sintered pellets - Combustion in a high-frequency induction furnace - Infrared absorption spectrometry.

DIN 25471:2009 带轻水反应堆的核电站燃料槽中核燃料元件在搬运和储存时燃耗应考虑的临界安全性

Criticality safety taking into account the burnup of fuel elements when handling and storing nuclear fuel elements in fuel pools of nuclear power plants with lightwater reactors

ISO 18213-3:2009 核燃料技术.核材料衡算用容器校准和体积测定.第3部分:统计方法

Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy - Part 3: Statistical methods