G09 卫生、安全、劳动保护 标准查询与下载

HG 23018-1999 化工企业厂区作业安全规程 厂区设备检修作业安全规程

The Safety Code for Equipment Repair in Workplace

MT 756-1997 隔爆水槽用聚苯乙烯泡沫塑料.阻燃性能试验方法

本标准规定了隔爆水槽用聚苯乙烯泡沫塑料阻燃性能的要求和试验方法。 本标准适用于隔爆水槽用聚苯乙烯泡沫塑料材料点滴燃烧试验。

Test method of flame resistance property of polystyrene foam plastics for water trough for explosion suppression

SANS 11014-1:1994 化学品安全资料表．第1部分 内容和项目顺序

Presents information for the compilation and completion of an SDS. It defines specifically the general layout of the SDS, the 16 standard headings, the numbering and the sequence of these 16 standard headings and the items necessary to fill in an SDS wit

Safety data sheet for chemical products Part 1: Content and order of sections

WJ 2405-1997 弹药包装、装卸、运输和贮存安全要求

Ammunition packaging, handling, transportation and storage safety requirements

WJ 2404-1997 弹药装药装配生产安全要求

Ammunition charge assembly production safety requirements

ASTM F1525-96(2001) 减少危险化学物质泄漏中薄膜技术的使用标准导则

General8212;This guide contains information regarding the use of membrane technology to recover and concentrate hazardous materials that have entered surface and ground water as the result of a spill. Membrane technology may be applied alone or in conjunction with other treatment techniques, as follows: 4.1.1 Different types of membrane are used in series with filters to treat highly contaminated solutions reaching concentration levels of several parts per million of organic and inorganic materials. 4.1.2 Different types of membranes are applied in series to treat very dilute concentrations (parts per billion level) of organic and inorganic compounds. Each membrane type has the ability to remove specific compounds, thus producing a concentrated fraction. This fraction may require final off-site treatment but provides a significant reduction in transportation costs due to the large volume reduction achieved. 4.1.3 Membranes may be used in conjunction with destruction technologies such as advanced oxidation processes (AOPs). This method is recommended for dilute solutions. The membrane technology portion concentrates the compounds to an optimum level for AOP destruction.1.1 This guide covers considerations for the use of membrane technology in the mitigation of dilute concentrations of spilled chemicals into ground and surface waters. 1.2 This guide addresses the application of membrane technology alone or in conjunction with other technologies. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. In addition, it is the responsibility of the user to ensure that such activity takes place under the control and direction of a qualified person with full knowledge of any potential or appropriate safety and health protocols.

Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

ASTM F1525-96 减少危险化学物质泄漏中薄膜技术的使用标准导则

1.1 This guide covers considerations for the use of membrane technology in the mitigation of dilute concentrations of spilled chemicals into ground and surface waters. 1.2 This guide addresses the application of membrane technology alone or in conjunction with other technologies. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. In addition, it is the responsibility of the user to ensure that such activity takes place under the control and direction of a qualified person with full knowledge of any potential or appropriate safety and health protocols.

Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

HG 20571-1995 化工企业安全卫生设计规定

Regulations on Safety and Sanitation Design of Chemical Enterprises

HG/T 20532-1993 化工粉体工程设计安全卫生规定（附条文说明）

Safety and health regulations for chemical powder engineering design (with explanations)

WJ 2177-1994 火药、炸药、弹药、引信及火工品生产安全技术管理规程

Production Safety Technical Management Regulations for Gunpowder, Explosives, Ammunition, Fuze and Explosives

WJ 2053-1991 火工品作业安全防护要求

Safety protection requirements for pyrotechnics operations

ISO 3165:1976 工业用化学品取样 取样的安全性

Gives general recommendations applicable to all operations whatever the nature of the material being sampled is. Relates to safe access to and from the place where the sample is taken from and a safe working place with adequate safety regulations. Contains specific recommendations for hazardous products. The physical and chemical properties may be such that they can have a direct physiological effect or that fire or explosion risks are present during handling. A general classification of risks is listed.

Sampling of chemical products for industrial use; Safety in sampling

HG 20571-1995（条文说明） 化工企业安全卫生设计规定

Regulations on Safety and Sanitation Design of Chemical Enterprises