共找到 547 条与 无机化工原料综合 相关的标准,共 37 页
本标准规定了无机化工产品中水不溶物含量测定通用方法的方法提要、试剂和材料、仪器设备、分析步骤和结果计算。 本标准适用于无机化工产品中水不溶物含量的测定,本标准规定的玻璃砂坩埚法适用于非碱性物质水不溶物的测定。用本标准测定水不溶物时按取样量和规格值计算所得到的不溶物质量不得不小于1mg。
Inorganic chemicals for industrial use.General method for the determination of water insoluble matter
本标准规定了无机化工产品中重金属测定通用方法-目视比色法的安全提示、一般规定、方法原理、试剂、仪器、分析步骤。 本标准适用于无机化工产品中重金属(以Pb计)的限量测定,检测范围为:0.2μg/mL-2μg/mL。
Inorganic chemicals for industrial use.General method for determination of heavy metals
本标准规定了测定无机化工产品中总氮含量(硝态氮、铵态氮)的通用方法——蒸馏-酸碱滴定法的方法提示、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本标准适用于无机化工产品中总氮含量的测定,本方法适用于无机化工产品中常量、半微量氮的测定。
Inorganic chemicals for industrial use.General method for the determination of total nitrogen content.Distillation-acid-base titrations method
本标准规定了无机化工产品中用重量法测定灼烧残渣的通用方法的方法提要、分析步骤、结果计算。 本标准适用于能够升华或碳化并可在550℃~1200℃下除净主体的无机化工产品灼烧残渣的测定。
Inorganic chemials for industrial use.General method for the determination of residue after ignition
本标准规定了无机化工产品中铅含量测定通用方法-原子吸收光谱法的安全提示、一般规定、石墨炉原子吸收光谱法和火焰原子吸收光谱法。 本标准适用于石墨炉原子吸收光谱法和火焰原子吸收光谱法测定机化工产品中铅含量。本标准规定的石墨炉原子吸收光谱法的最低检出浓度为5μg/L;火焰原子吸收光谱法的最低检出浓度为0.1mg/L。
Inorganic chemicals for industrial use.General method for the determination of lead content.Atomic absorption spectrometry
本标准规定了无机化工产品中用重量法测定蒸发残渣的通用方法的方法提要、分析步骤、结果计算。 本标准适用于在操作温度下、主体与残渣稳定性或挥发性存在差异的无机化工产品。
Inorganic chemicals for industrial use.General method for the determination of dry residue after evaporation
本部分规定了无水高氯酸锂中氯化物含量的测定方法的原理、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中氯化物含量的测定。测定范围:0.2μg/mL~4μg/mL(以C1计)。
Lithium perchlorate anhydrous.Part 5:Determination of chloride content
本部分规定了硫酸亚锡中碱金属和碱土金属硫酸盐总量的测定分析方法原理、安全提示、一般规定、分析步骤、结果计算。 本部分适用于硫酸亚锡中碱金属和碱土金属硫酸盐含量的测定。测定范围:0.02%-0.20%。
Chemical analysis method for stannous sulfate.Part 3:Determination of alkali metals sulfate and alkaline-earth metals sulfate.Gravimetric method
本部分规定了邻菲啰啉(1,10-菲啰啉,二氮杂菲)分光光度法测定硫酸亚锡中铁含量测定的分析方法原理、分析步骤和结果计算。 本部分适用于硫酸亚锡中铁含量的测定。测定范围:0.001%~0.050%
Chemical analysis method for stannous sulfate.Part 6:Determination of iron content.1,10-Phenanthroline spectrophotometry
本标准规定了工业硫氰酸铵、工业硫氰酸钠和工业硫氰酸钾中硫氰酸盐含量、铁含量、水不溶物含量、105℃时的挥发物含量、卤化物含量、硫化物含量、重金属含量、pH值、硫酸盐含量、灼烧残渣含量和(工业硫氰酸钠和工业硫氰酸钾中)铵盐含量的分析方法。 本标准适用于工业硫氰酸盐产品、其中包括工业硫氰酸铵、工业硫氰酸钠和工业硫氰酸钾。
Analytical method of thiocyanate for industrial use
本部分规定了硫酸亚锡中铅、铜含量的测定方法 火焰原子吸收分光光度法的分析方法原理、安全提示、一般规定、铅含量的测定、铜含量的测定。 本部分适用于硫酸亚锡中铅、铜含量的测定。测定范围:铅0.003%~0.05%;铜0.001%~0.05%。
Chemical analysis method for stannous sulfate.Part 4:Determination of lead and copper content.Flame atomic absorption spectrometry
本部分规定了硫酸亚锡中主含量的测定方法重铬酸钾滴定法的分析方法提要、安全提示、一般规定、分析步骤、结果计算。 本部分适用于硫酸亚锡中主含量的测定。
Chemical analysis method for stannous sulfate.Part 1:Determination of stannous sulfate content.Volumetric method of potassium dichromate
本部分规定了无水高氯酸锂中氯酸盐含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中氯酸盐含量的测定。测定范围:0.2μg/mL~4μg/mL(以C1计)。
Lithium perchlorate anhydrous.Part 6:Determinatoin of chlorate content
本标准规定了无机化工产品中镉含量测定的通用方法原子吸收分光光度法的安全提示、一般规定、石墨炉原子吸收分光光度法和火焰原子吸收分光光度法。 本标准适用于石墨炉原子吸收分光光度法和火焰原子吸收分光光度法测定无机化工产品中的镉含量。石墨炉原子吸收分光光度法的最低检出浓度为0.001 mg/L。火焰原子吸收分光光度法的最低检出浓度为0.02 mg/L。
Inorganic chemicals for industrial use.General method for the determinations of cadmium.Atomic absorption spectrometry
本部分规定了高氯酸锂含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中高氯酸锂含量的测定。
Lithium percholorate anhydrous.Part 2:Determination of lithium perchlorate anhydrous content
本部分规定了无水高氯酸锂澄清度的测定方法提要、一般规定、分析步骤和结果判定。 本部分适用于无水高氯酸锂澄清度的测定。
Lithium perchlorate anhydrous.Part 13:Determination of transparency
本部分规定了无水高氯酸锂中铅含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中铅含量的测定,最低检测浓度为:0.1μg/L.
Lithium perchlorate anhydrous.Part 11:Determination of lead content
本标准规定了硫酸亚锡中盐酸不溶物含量的测定分析方法原理、安全提示、一般规定、试剂、仪器、分析步骤和结果计算。 本部分适用于硫酸亚锡中盐酸不溶物含量的测定。测定范围:0.001%~0.05%
Chemical analysis method for stannous sulfate.Part 2:Determination of insoluble substance in hydrochloric acid.Gravimetric method
本标准规定了无机化工产品电位滴定法对仪器的要求和定量分析的通用规则。 本标准适用于无机化工产品酸碱滴定、沉淀滴定、氧化还原滴定和非水滴定。特别适用于混浊、有色溶液的滴定以及缺乏合适指示剂的滴定分析方法
Inorganic chemical products.General eules for potentiometric titration
本部分规定了无水高氯酸锂中钾和钠含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中钾和钠含量的测定,线性范围:0.006μg/mL~0.4μg/mL(钾),0.008μg/mL~1.5μg/mL(钠)。
Lithium perchlorate anhydrous.Part 8:Determination of potassium and sodium content
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号