共找到 547 条与 无机化工原料综合 相关的标准,共 37 页
本标准规定了无机化工产品电位滴定法对仪器的要求和定量分析的通用规则。 本标准适用于无机化工产品酸碱滴定、沉淀滴定、氧化还原滴定和非水滴定。特别适用于混浊、有色溶液的滴定以及缺乏合适指示剂的滴定分析方法
Inorganic chemical products.General eules for potentiometric titration
本标准规定了硫酸亚锡中盐酸不溶物含量的测定分析方法原理、安全提示、一般规定、试剂、仪器、分析步骤和结果计算。 本部分适用于硫酸亚锡中盐酸不溶物含量的测定。测定范围:0.001%~0.05%
Chemical analysis method for stannous sulfate.Part 2:Determination of insoluble substance in hydrochloric acid.Gravimetric method
本部分规定了无水高氯酸锂中总氮含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中氮含量的测定,检测范围为0.05μg/mL~0.8μg/mL(以N计)。
Lithium perchlorate anhydrous.Part 12:Determination of total nitrogen content
本标准规定了无机化工产品中镉含量测定的通用方法原子吸收分光光度法的安全提示、一般规定、石墨炉原子吸收分光光度法和火焰原子吸收分光光度法。 本标准适用于石墨炉原子吸收分光光度法和火焰原子吸收分光光度法测定无机化工产品中的镉含量。石墨炉原子吸收分光光度法的最低检出浓度为0.001 mg/L。火焰原子吸收分光光度法的最低检出浓度为0.02 mg/L。
Inorganic chemicals for industrial use.General method for the determinations of cadmium.Atomic absorption spectrometry
本部分规定了硫酸亚锡中铅、铜含量的测定方法 火焰原子吸收分光光度法的分析方法原理、安全提示、一般规定、铅含量的测定、铜含量的测定。 本部分适用于硫酸亚锡中铅、铜含量的测定。测定范围:铅0.003%~0.05%;铜0.001%~0.05%。
Chemical analysis method for stannous sulfate.Part 4:Determination of lead and copper content.Flame atomic absorption spectrometry
本部分规定了无水高氯酸锂中水不溶物含量的测定方法的方法提要、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本标准适用于无水高氯酸锂水不溶物含量的测定。
Lithium perchlorate anhydrous.Part 4:Determination of water insoluble matter content
本部分规定了无水高氯酸锂中氯化物含量的测定方法的原理、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中氯化物含量的测定。测定范围:0.2μg/mL~4μg/mL(以C1计)。
Lithium perchlorate anhydrous.Part 5:Determination of chloride content
本标准规定了无机化工产品中五氧化二磷含量测定的通用方法--喹钼柠酮重量法。 本标准适用于无机化工产品中常量磷及磷酸盐的测定。
Inorganic chemical products.General method for the determination of total phosphorus(V)oride content
Lithium perchlorate anhydrous—Part 3:Determination of moisture content
Anhydrous lithium perchlorate-Part 9: Determination of calcium content
本部分规定了无水高氯酸锂澄清度的测定方法提要、一般规定、分析步骤和结果判定。 本部分适用于无水高氯酸锂澄清度的测定。
Lithium perchlorate anhydrous.Part 13:Determination of transparency
Lithium perchlorate anhydrous—Part 11:Determination of lead content
本部分规定了无水高氯酸锂中水分的测定方法的方法提要、一般规定、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂水分的测定。
Lithium perdholorate anhydrous.Part 3:Determination of moisture content
本部分规定了无水高氯酸锂中钾和钠含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中钾和钠含量的测定,线性范围:0.006μg/mL~0.4μg/mL(钾),0.008μg/mL~1.5μg/mL(钠)。
Lithium perchlorate anhydrous.Part 8:Determination of potassium and sodium content
本部分规定了无水高氯酸锂中铅含量的测定方法的方法提要、安全提示、一般规定、试剂、仪器、设备、分析步骤和结果计算。 本部分适用于无水高氯酸锂中铅含量的测定,最低检测浓度为:0.1μg/L.
Lithium perchlorate anhydrous.Part 11:Determination of lead content
本标准规定了无机化工产品中硫酸盐测定通用方法--目视比浊法的方法提要、分析步骤和结果判定。 本标准适用于无机化工产品中微量硫酸盐的测定。检测范围为0.4μg/mL~4μg/mL(以SO计)。
Inorganic chemicals for industrial use.General method for the determination of sulphate.Visible turbidimetric method
本部分规定了邻菲啰啉(1,10-菲啰啉,二氮杂菲)分光光度法测定硫酸亚锡中铁含量测定的分析方法原理、分析步骤和结果计算。 本部分适用于硫酸亚锡中铁含量的测定。测定范围:0.001%~0.050%
Chemical analysis method for stannous sulfate.Part 6:Determination of iron content.1,10-Phenanthroline spectrophotometry
General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
Anhydrous lithium perchlorate - Part 8: Determination of potassium and sodium content
Anhydrous lithium perchlorate-Part 9: Determination of calcium content
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号