G18 煤焦油加工产品 标准查询与下载

ANSI/ASTM D367:1994 杂酚油中二甲脂不溶物的试验方法

This test method covers the determination of the xylene-insoluble matter in creosote and creosote-coal tar solution. Since this method is empirical, strict adherence to all details of the procedure is necessary for close agreement of results among laboratories. Test Method D38 covers the sampling of wood preservatives prior to testing. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Xylene-Insoluble Matter in Creosote

ANSI/ASTM D168:1994 杂酚油焦炭渣试验方法

This test method covers the determination of the coke residue (fixed carbon) of creosote, coal tar, and creosote-coal tar solutions. As coal tars vary in their coke residue values, the method is therefore not a quantitative index of the percentage of coal tar in creosote-coal tar solutions. However, by specifying maximum amounts of coke residue as done in AWPA Standards P2 and P12, the method does serve to limit the amount of coal tar in such solutions; and by specifying a minimum as in Standard P12 it ensures the presence of some coal tar. Formerly the test was also used as a check on the cleanliness of AWPA P1 creosote (absence of coal tar). Test Method D38 covers the sampling of wood preservatives prior to testing.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 6 for specific precautionary statements.

Test Method for Coke Residue of Creosote

NAVY MIL-G-81239 NOTICE 1-1992 油酸甘油酯

MlL-G-81239(08), dated 23 March 1965, and Amendment 1 dated 16 November 1966 are inactive for new design and no longer used by the Navy except for replacement purposes.

GLYCEROL MONOOLEATE

YB/T 4020-1991 黄血盐钠中氰化物含量的测定方法

Determination method of cyanide content in yellow blood sodium salt

MT 239-1991 褐煤蜡技术条件

Technical conditions of montan wax

ASTM D2416-84(2004) 焦油和硬沥青焦化值的(改进的康那底松)测试方法

This test method is useful for indicating the relative coke-forming propensities and for evaluating and characterizing tars and pitches. This test method can also be used as one element in establishing the uniformity of shipments or sources of supply. FIG. 1 Apparatus for Determining Carbon Residue1.1 This test method covers the determination of the coking value of tar and pitch having an ash content not over 0.5% as determined by Test Method D2415. 1.2 Coking values by this method are practically the same as those obtained by Test Method D189, but results are more reproducible. The apparatus used is identical, except that an electric furnace is substituted for the gas flame. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

JIS K 2425:1983 杂酚油、精制焦油和焦油沥青的测试方法

Methods for testing creosote oil, prepared tar and tar pitch

JIS K 2439:1983 杂酚油、精制焦油、焦油沥青

Creosote oil･Prepared tar･Tar pitch

NF U43-213:1981 农药产品.蒽油.试验方法

Agropharmaceutical products. Anthracen oil. Test methods.

NAVY MIL-G-81239 (1)-1966 油酸甘油酯

This amendment forms apart of Military Specification MIL-G-81239(OS), 23 March 1965, and has been approved by the Naval Ordnance Systems Command, Department of the Navy.

GLYCEROL MONOOLEATE

NAVY MIL-G-81239-1965 油酸甘油酯

The material purchased in accordance with this specification is intended to be used as an ingredient of a wetting agent for rocket motor propellants.

GLYCEROL MONOOLEATE

NAVY MIL-P-81237-1965 季戊四醇二油酸酯

Intended use. The material purchased in accordance with this specification is intended to be used as an ingredient in the chemical composition of a wetting agent.

PENTAERYTHRITOL DIOLEATE

DOI FED CTDC 1-1962 煤焦油复合防潮剂的标准规格

The compound shall consist of coal-tar pitch and coal-tar solvents, suitably blended to produce a liquid which is smooth and uniform in consistency and which complies with the following detail requirements: I I,... - .. .. .... . . _ - . .- ... - .. -. . < . . . ..... . .. .. . . .: . . a. Distillate to 440' F, percent, by weight, 25 to 35 b. Softening point of distillation residue, ' F 140 to 160 ce Water, percent, by weight, maximum 0.5 . d. Shall be suitable for spray application at temperatures above 60' F e, When applied at a coverage rate of 300 square feet per gallon on a clean, smooth steel surface and allowed to dry insa ventilated 70' F, 50-percent relative-humidity atmosphere, the compound shall dry to a firm, dry film in 24 hours.

COAL-TAR DAMPPROOFING COMPOUND, STANDARD SPECIFICATIONS FOR

YB/T 5172-1993 木材防腐油试验方法 闪点测定方法

Test method for wood preservative oil - Determination of flash point