共找到 1232 条与 胶粘剂基础标准与通用方法 相关的标准,共 83 页
本标准规定了用37.00mL的重量杯测定液态胶粘剂及其组分密度的方法。 本标准适用于液态胶粘剂密度的测定,特别适用于粘度较高或组分的挥发性较大,不宜用比重瓶法测定密度的液态胶粘剂。
Test method for density of adhesives in fluid from.Method of weight cup
本标准规定了无机胶粘剂套接压缩剪切强度试验中的试件结构和尺寸、试样制备方法、试验环境条件、试验步骤及试验结果的计算方法。 本标准适用于对同种或异种金属材质的无机胶粘剂套接压缩剪切强度的测定。
Testing method for compressive shear strength of dowel joint by inorganic adhesives
Inorganic adhesive socket compression scissors strength test method
本标准适用于压敏胶粘带(胶面对背面)剪切强度的试验。
Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side the tape)
本标准适用于压敏胶粘带拉伸性能(拉伸强度、断裂伸长率、屈服强度)的试验。
Test method for tensile properties of pressure sensitive adhesive tapes
本标准适用于绝缘胶粘带在连续均匀升压下的工频击穿强度的测定。
Test method for electric of insulating adhesive tape at power frequency
本标准适用于测试在温度、拉伸剪切应力和时间的综合影响下,胶接金属与金属用的胶粘剂的蠕变性能。 本标准适用的温度范围是室温至250℃。
The method of creep properties of adhesive in shear by tension loading (metal to metal)
本标准规定了在室温下测定胶粘剂的金属对金属胶接的劈裂强度试验方法。本标准适用于规定条件下制备、测试的标准试样。
Test method of cleavage strength of adhesive (metal to metal)
Test method for power frequency breakdown strength of insulating adhesive tape
Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
Test Method for Splitting Strength of Adhesives (Metal to Metal)
本标准规定了在室温下金属对金属搭接的胶粘剂拉伸剪切强度测定方法。本标准适用于规定条件下制备、测试的标准试样。 本标准等效采用ISO4587-1979《胶粘剂--高强度胶粘剂拉伸搭接剪切强度的测定》。
The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
This document specifies test methods and requirements for two-component epoxy and polyurethane adhesives for on-site repair of cracks in timber structures made of strength graded structural timber with rectangular cross-section, structural finger-jointed timber, glued solid timbe
Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification; German version EN 17418:2021
This standard specifies a test method for determination of the adhesion between bonded adhesives of plastic and metal under peeling forces.
Structural adhesives - Testing of adhesive bonds - Bending peel test
1.1?These test methods cover the principles for establishing allowable mechanical properties for adhesives that can be used to design adhesive-bonded joints for structural components and assemblies of wood or wood with other materials. These test methods are modeled after Practi
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
1.1?This test method covers the determination of the resistance of flexible low permeance vapor retarders for thermal insulation as classified in Specification C1136 to elevated temperature and humidity. Water vapor permeance measurement and visual inspection after exposure at e
Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
1.1?This test method covers the visual determination of the thermal integrity of flexible water vapor retarders for those materials classified under Specification C1136, including plastic, foil, or paper and composites of two or more of these materials to temperatures listed in
Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
本标准规定了预制节段拼装用环氧胶粘剂的术语和定义、分类和标记、技术要求、试验方法、检验规 则及标志、包装、运输、贮存等
Epoxy Adhesive for Prefabricated Segment Assembly
Determination of acrylamide content in water-based adhesives, two-component polyurethane adhesives and ethylene-vinyl acetate (EVA) films for composite flexible packaging (2018)
Determination of acrylamide content in water-based adhesives
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号