共找到 1232 条与 胶粘剂基础标准与通用方法 相关的标准,共 83 页
This standard specifies a test method for the determination of the properties of adhesively bonded metal joints by storage in test fluids, e. g. in water, fuels, oils and hydraulic fluids, at different temperatures.
Testing of adhesives for metals and adhesively bonded metal joints - Determination of the resistance to liquids
This European Standard establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing conditions of load-bearing timber structures only.This European Standard only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.The performance requirements of this European Standard apply to the adhesive only, not to the timber structure. This European Standard does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) nor the production of wood-based panels, except solid wood panels, or modified and stabilised wood with considerably reduced swelling and shrinkage properties, e. g. such as acetylated wood, heat treated wood and polymer impregnated wood.This European Standard is primarily intended for the use of adhesive manufacturers and for the use in timber structures bonded with adhesives, to assess or control the quality of adhesives. The requirements apply to the type testing of the adhesives. Production control activities are outside the scope of this European Standard.Adhesives meeting the requirements of this European Standard are adequate for use in a load-bearing timber structure, provided that the bonding process has been carried out according to an appropriate product standard.
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2017
Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
This document specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in tension and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood in either parallel-laminated or cross-laminated construction. This method is not intended for use in testing manufactured products.
Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading
Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2017
Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties; German version EN 14187-3:2017
Cold applied joint sealants - Test method - Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals; German version EN 14187-6:2017
Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals; German version EN 14187-4:2017
Cold applied joint sealants - Test methods - Part 2: Determination of tack free time; German version EN 14187-2:2017
Thermal spraying. Determination of tensile adhesive strength
Adhesives for ceramic tiles. Requirements, assessment and verification of constancy of performance, classification and marking
5.1 The rolling-ball tack test is fast, easy to run, and requires little investment in equipment and little operator training. This test is intended primarily for quality control use since it demonstrates good reproducibility within a single laboratory and ability to detect batch-to-batch variations accurately if adhesive film thickness is held constant. Rolling ball tack is not intended as an investigative tool since for most pressure sensitive adhesive applications rolling ball tack results do not correlate well with application tack requirements. 1.1 This test method covers measurement of the comparative tack of pressure-sensitive adhesives by a rolling ball and is most appropriate for low-tack adhesives. This test method is only one of several available for the measurement of tack. 1.1.1 This test method is not recommended for the specification of end use products. 1.2 Values stated in either SI or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents, therefore, each system must be used independently without combining values in any way. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
1.1 These test methods cover procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation. These tapes are classified as follows: 1.1.1 Class 1—Non-elastomeric backings made from materials such as: Paper, flat or creped, Fabric, uncoated or coated, Cellulose ester films, Polyethylene terephthalate (polyester) films, Fluorocarbon polymer films, Composite filament films, Polyamide films, Polyimide films, and Combinations thereof. 1.1.2 Class 2—Elastomeric backings that are characterized by both high stretch and substantial recovery. These backings are made from materials such as: Vinyl chloride and co-polymers, Vinylidene chloride and co-polymers, and Polyethylene and co-polymers. 1.2 Test laminates of Class 1 a
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
Classification of thermosetting wood adhesives for non-structural applications; German version EN 12765:2016
Test method for thermal shear failure temperature of hot melt adhesives
Test method for hot-melt adhesives and hot-melt adhesives thermal shear failure temperature for low-pressure injection molding packaging (2016)
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号