G81 感光材料 标准查询与下载

JB/T 12630-2016 静电复印干式墨粉软化点试验方法

本标准规定了静电复印干式墨粉软化点的试验条件、试验步骤及试验报告。 本标准适用于静电复印干式墨粉(包括干式单组分和干式双组分显影剂中的墨粉)软化点的测量。

Test method for softening point of electrostatic dry toner

DIN ISO 18928:2015 制图材料.未处理摄影胶片和相纸.储存规程(ISO 18928-2013)

Imaging materials - Unprocessed photographic films and papers - Storage practices (ISO 18928:2013)

BS ISO 2969:2015 电影技术. 电影控制室和室内影院B环电声响应. 规格和测量

Cinematography. B-chain electroacoustic reponse of motion-picture control rooms and indoor theatres. Specifications and measurements

KS A ISO 8567:2015 电影摄影.在35 mm和16 mm电影发行拷贝上说明字幕的最大允许区域.尺寸和位置

Cinematography — Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints — Position and dimensions

ISO 2939:2015 电影技术. 35 mm电影发行拷贝上的画面区域. 位置和尺寸以及模拟和数字摄影声像记录位移

This International Standard specifies the positions, dimensions, and location of image and photographic sound records on 35 mm motion-picture release prints, which have been assigned for optical projection based on ISO 2907 or transmitted by television based on ISO 1223. It also specifies the relative displacement of sound with respect to the corresponding picture image frame and, through normative reference to ISO 17266, the placements of the multichannel analogue and digital photographic sound and control records.

Cinematography - Picture image area on 35 mm motion-picture release prints - Position and dimensions and analogue and digital photographic sound to picture record displacement

BS ISO 18943:2014 成像材料. 用于图像存储的磁硬盘驱动器. 养护和处理

Imaging materials. Magnetic hard drives used for image storage. Care and handling

BS ISO 71:2014 电影技术. 在16 mm, 35/16 mm和35/32 mm电影胶片上的16 mm负片光学声带. 位置和尺寸

Cinematography. 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film. Positions and dimensions

BS ISO 7832:2014 电影技术. 光学型音频级试验胶片的光电输出率. 测野和校准

Cinematography. Photoelectric output factor of photographic-type audio-level test films. Measurement and calibration

BS ISO 18944:2014 成像材料.反射色摄影印制品.测试打印结构和测量

Imaging materials. Reflection colour photographic prints. Test print construction and measurement

ISO 18944:2014 成像材料.反射彩色摄影照片.测试打印结构和测量

Imaging materials - Reflection colour photographic prints - Test print construction and measurement

BS ISO 12653-3:2014 电子成像. 办公文件扫描用测试标版. 低分辨率应用使用的测试标版

Electronic imaging. Test target for scanning of office documents. Test target for use in lower resolution applications

ISO 18937:2014 成像材料. 已冲洗照片. 室内光稳定性的测量方法

This International Standard describes test equipment and procedures for measuring the light stability of images of colour photographic reflection prints designed for display in, for example, houses, apartments, other dwelling places, offices and commercial display, when subjected to certain illuminants at specified temperatures and relative humidities. This International Standard also addresses colour photographic reflection prints designed for display in galleries and museums. Indoor illumination conditions described in this International Standard include a) simulated indoor daylight typical home display, b) simulated direct sunlight in-window display, c) fluorescent illumination using “cool white”, and d) other types of illumination sources, such as other fluorescent lamps, tungsten halogen, LED, OLED and metal halide lamps. This International Standard is applicable to reflection colour prints made with colour hardcopy materials. Included are inkjet prints, thermal dye diffusion transfer (“dye-sub”) prints, liquid- and dry-toner electrophotographic prints, prints made with traditional chromogenic (“silver-halide”) photographic colour materials and, in general, all types of colour prints made with direct analog and digital print processes. The recommended evaluation methods can also be applied to black-and-white photographic prints. This International Standard does not include test procedures for determining the effects of light exposure on the physical stability of images, supports or binder materials. However, it is recognized that in some instances, physical degradation, such as support embrittlement, image layer cracking or delamination of an image layer from its support, rather than the stability of the image itself, will determine the useful life of a print material. Print image stability results determined for one printer model, software settings, colourant and media combination might not be applicable to image prints produced through another printer model, software settings, colourant and media combination.

Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability

BS ISO 18937:2014 成像材料. 已冲洗照片. 室内光稳定性的测量方法

Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability

KS A ISO 2721:2013 摄影.照相机.曝光自动控制

이 표준은 필름카메라 초점면에서의 노출 값에 대해 규정하되 2개의 노출 변수, 즉 장면의 밝기(fieldluminance)와 필름 속도의 값에 대해 규정한다. 또한 광전 시스템의 수용각도(acceptance angle)와 같은 광계측 특성의 평가 방법을 기술한다.이 표준은 필름카메라에 내장된 자동 노출 제어 장치, 또는 카메라에 연결되어 초점면에서의 노출을몇몇의 노출 변수의 함수로 통제하고자 하는 장치에 대해 적용한다. 이 메커니즘은 초점면 조명이나노출 시간 간격 또는 이 둘 모두를 제어한다. 이 표준에는 비록 전자동은 아니지만 포인터(또는 바늘) 매칭 장치가 포함되어 있다. 이 표준은 디지털카메라에는 적용하지 않는다.

Photography — cameras-automatic controls of exposure

KS A ISO 2910:2013 电影摄影.室内影院和鉴定放映室的银幕亮度

1.1 이 표준은 극장 상영용으로 초당 24프레임의 70 mm, 35 mm, 16 mm 영화 프린트를 위한 스크린 휘도와 색도의 화이트 포인트를 규정한 것이다. 이 표준에서 “스크린”이라는 용어는 필름 포맷과사용 중인 영사 시스템에 맞는 영사 이미지 영역을 의미한다.1.2 이 표준은 비록 극장용이 아니라 할지라도 초당 24프레임으로 영사하는 일반 70 mm, 35 mm,16 mm 프린트 필름의 영사용으로도 적극 권장한다.

Cinematography — Screen luminance for the projection of motion-picture prints indoor theatres and review rooms

KS A ISO 21500:2013 项目管理指南

이 표준은 프로젝트관리에 대한 지침(이하, “지침”이라 한다.)을 제공하며 공공 기관, 민간 기구 또는공동체를 포함하여 어떠한 형태의 조직에서도 프로젝트의 복잡성, 규모 또는 기간과 상관 없이 모든프로젝트에 사용이 가능하다.이 표준은 프로젝트관리에서 좋은 관행으로 여겨지는 개념 및 프로세스의 상위 개념을 제공한다. 프로젝트는 프로그램과 프로젝트 포트폴리오와 같은 맥락이지만 이 표준에서는 프로그램 및 프로젝트포트폴리오 관리에 대한 상세한 지침을 제시하지 않는다. 일반 경영과 관련된 주제는 프로젝트관리맥락 범위 내에서만 사용하기로 한다.

Guidance on project management

BS ISO 4241:2013 电影.电影院放映片头、片尾和提示标记.规范

Cinematography. Theatre projection leader, trailer and cue marks. Specifications

ISO 18902:2013 成像材料.已加工的成像材料.相册、框架和存储材料

This International Standard specifies the principal physical and chemical requirements for album, storage and framing materials to prevent damage to processed or printed imaging materials over time. This International Standard covers requirements for paper and paperboard, plastics, metals, writing instruments, adhesives, tapes, self-adhesive labelling materials, stamping inks and pads as well as framing and glazing materials used as or in the construction of storage and display materials for black-and-white or colour reflection prints or negatives made with traditional silver-halide and silver dye bleach photographic materials, as well as dye- and pigment-based inkjet; dye diffusion thermal transfer ("dye sublimation"), and liquid- and dry-toner electrophotographic digital prints. This International Standard does not provide specifications for the design, construction or durability of the storage and display materials themselves. The requirements are limited to the characteristics of the storage or display materials that may affect the imaging materials either chemically or physically when they are stored or displayed under recommended conditions.

Imaging materials - Processed imaging materials - Albums, framing and storage materials

BS ISO 18902:2013 成像材料. 经处理的成像材料. 相册, 框架和存储材料

Imaging materials. Processed imaging materials. Albums, framing and storage materials

BS ISO 18947:2013 成像材料 摄影反射打印 摄影图像耐磨性的测定

Imaging materials. Photographic reflection prints. Determination of abrasion resistance of photographic images