G93 化工设备 标准查询与下载

DIN 28017-2:2012 处理装置的固定使用.第2部分:平台的围栏

Stationery accesses to process apparatus - Part 2: Railings for platforms

DIN 28017-4:2012 处理装置的固定使用.第4部分:抗非故意下降的安全设备

Stationary accesses to process apparatus - Part 4: Safety devices against unintentional descent

DIN 28017-1:2012 处理装置的固定接近.第1部分:平台

Stationary accesses to process apparatus - Part 1: Platforms

DIN EN ISO 13706:2012 石油、石化和天然气工业.风冷热交换器

Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011); English version EN ISO 13706:2011, only on CD-ROM

DIN 28160:2012 碳钢和不锈钢制搅拌器容器用支撑环.位置

Support rings for carbon and stainless steel agitator vessels - Position

BS EN ISO 13706:2011 石油、石油化工和天然气工业.风冷式热交换器

Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers

BS ISO 22734-2:2012 用水电解处理的氢发生器.住宅设施

Hydrogen generators using water electrolysis process. Residential applications

ANSI/ASME BPE-2012 生物处理设备

The ASME BPE Standard provides requirements for systems and components that are subject to cleaning and sanitization and/or sterilization including systems that are cleaned in place (CIP'd) and/or steamed in place (SIP'd) and/or other suitable processes. This Standard also provides requirements for single use systems and components. The ASME Bioprocessing Equipment Standard was developed to aid in the design and construction of new fluid processing equipment used in industries that require a defined level of purity and bioburden control.

Bioprocessing Equipment

HG/T 4170-2011 钢制螯合树脂塔

本标准规定了钢制螯合树脂塔的型号标志方法、规格参数、结构型式、要求、试验方法、检验规则、标志、油漆、包装、运输和贮存。 本标准适用于设计压力大于-0.02MPa、小于等于0.6MPa,设计温度大于等于10℃、小于等于60℃的螯合树脂塔。

Steel chelating resin towers

HG/T 3673-2011 高温承压用静态铸造合金管件

本标准规定了工业炉高温承压用静态铸造合金管件（以下简称铸件）的要求、试验方法、检验验收、标志、包装及贮运等。 本标准适用于石油化工制氢转化炉、乙烯裂解炉及其它高温承压工业炉用静态铸造耐热钢管件和其它铸件。

Static cast fittings of furnace for service pressure bearing at high temperature

HG/T 4168-2011 单极式离子膜电解槽

本标准规定了单极式离子膜电解槽的型号标志方法、规格参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于氯碱工业用MMC-2.5型单极式离子膜电解槽和MMC-3.42型单极式离子膜电解槽。

Monpolar membrane cells

HG/T 3648-2011 磁力驱动反应釜

本标准规定了磁力驱动反应釜的型式、基本参数、材料、设计、制造、试验方法、检验规则以及标志、包装、运输和储存等方面的要求。 本标准适用于釜体几何容积为0.025m～50m、设计压力为0.1MPa～35MPa和设计温度为所用材料允许使用温度的磁力釜。

Magnetic driven reactor

HG/T 2471-2011 电解槽金属阳极涂层

本标准规定了电解槽金属阳极涂层的要求、试验方法、检验规则及金属阳极的包装、标志、贮运等。 本标准适用于电解槽中以钌为主体，以钛为基体，用于NaCl水溶液为电解液的氯碱工业隔膜法电解槽（以下简称电解槽）、次氯酸钠工业无隔膜电解槽（以下简称次氯酸钠槽）和氯酸盐工业无隔膜电解槽的金属阳极涂层。

Coating of dimensionally stable anode for electrolyzer

HG/T 2601-2011 高温承压用离心铸造合金炉管

本标准规定了高温承压用离心铸造合金炉管（以下简称炉管）的制造、试验、检验、标志、包装、运输、贮存等要求。 本标准适用于石油化工制氢转化炉以及乙烯裂解炉的炉管，也适用于其他高温承压用炉管。炉底辊、玻璃压辊等耐高温零部件亦可参照采用本标准。

Centrifugal casting alloy tubes for service of pressure bearing at high temperature

HG/T 2650-2011 水冷管式换热器

本标准规定了非直接受火的水冷管式换热器（以下简称"换热器"）的总则、术语和定义、要求、试验与试验方法、出厂文件和标志、油漆、包装、运输。 本标准适用于设计压力p≤35MPa的钢制水冷排管式（淋水式）和套管式换热器（包括U型换热管、排管、套管、连通管）及与换热器连为整体的受压零部件和支承钢架。 本标准不适用于要求作疲劳分析的换热器。

Water cooled tubular heat exchangers

HG/T 2469-2011 立式砂磨机

本标准规定了立式砂磨机的分类与命名、要求、试验方法、检验规则、标志、包装和贮运等要求。 本标准适用于立式砂磨机，也适用于工作原理相同的双筒砂磨机。

Vertical sand mill

ISO 22734-2:2011 采用水电解工艺的氢气发生器.第2部分:住宅应用

This part of ISO 22734 defines the construction, safety and performance requirements of packaged hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. This part of ISO 22734 is applicable to hydrogen generators that use the following types of ion transport medium: — group of aqueous bases; — solid polymeric materials with acidic function group additions, such as acid proton exchange membrane (PEM). This part of ISO 22734 is applicable to hydrogen generators intended for indoor and outdoor residential use in sheltered areas, such as car-ports, garages, utility rooms and similar areas of a residence. This part of Portable generators as well as hydrogen generators that can also be used to generate electricity, such as reversible fuel cells, are excluded from the scope of this part of ISO 22734. Hydrogen generators that also supply oxygen as a product are excluded from the scope of this part of ISO 22734. This part of ISO 22734 is intended to be used for certification purposes.

Hydrogen generators using water electrolysis process - Part 2: Residential applications

DIN EN ISO 28300 Berichtigung 1:2011 石油,石化和天然气工业.常压和低压存储罐的通风(ISO 28300-2008).德文版本EN ISO 28300-2008, DIN EN ISO 28300-2008-11的勘误表.德文版本EN ISO 28300-2008/AC-2009

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008); German version EN ISO 28300:2008, Corrigendum to DIN EN ISO 28300:2008-11; German version EN ISO 28300:2008/AC:2009

DIN 28128:2011 工艺设备用半蛇形管

Half-pipe coil jackets for process equipment

DIN 28005-1:2011 容器公差.第1部分:金属材料容器

Tolerances for vessels - Part 1: Vessels of metallic materials