G93 化工设备 标准查询与下载

HG/T 20566-2011 化工回转窑设计规定

本规定适用于工作压力为微负压或常压的化工回转窑及回转圆筒设备。化工回转窑及回转圆筒设备可应用于煅烧、焚烧、还原、干燥、冷却等工艺过程。

Design specification for chemical rotary kiln

HG/T 20661-2011 硫酸沸腾炉砌筑技术条件

本标准适用于硫铁矿原料及硫精矿原料焙烧抽取SO原料气的硫酸沸腾炉的砌筑施工与验收。对于以硫磺为原料的焚硫炉的砌筑施工也可以参照使用。

Technical specification of lining laying for fluidized bed furnace of sulphuric acid

HG/T 20581-2011 钢制化工容器材料选用规定

本标准规定了钢制化工容器用钢和焊接材料的选用、技术要求、使用限制和范围、新材料和按国外标准生产的钢材使用、钢材代用等要求。 本标准适用于设计压力不大于35.0MPa，设计温度高于-20℃的碳素钢、低合金高强度钢、珠光体耐热钢、不锈钢和不锈钢复合钢板焊制化工容器材料的选用。材料的品种包括轧材、锻件、铸件及焊接材料。

Specification of materials selection for steel chemical vessels

HG/T 20582-2011 钢制化工容器强度计算规定

钢制化工容器强度计算规定。具体规定详见标准内容

Specification of strength calculation for steel chemical vessels

HG/T 20584-2011 钢制化工容器制造技术要求

本标准是结合钢制化工容器的具体情况，对《钢制压力容器》GB 150制造部分的补充和具体化。 本标准的使用范围，除另有规定外，均与《钢制压力容器》GB 150相同。

Technical requirements of fabrication for steel chemical vessels

HG/T 20585-2011 钢制低温压力容器技术规定

本标准适用于设计温度等于或低于-20℃的钢制低温压力容器。 本标准的其他适用范围，引用标准及定义，除另有规定外，均与《钢制压力容器》GB 150相同。

Technical specification for steel low temperature pressure vessels

HG/T 20589-2011 化学工业炉受压元件强度计算规定

本标准适用于新建的化学工业炉炉管（包括直管和弯管）和相关连接件如联箱（集合管）、三通、异型管件等受压元件的强度计算。 本标准不适用于有耐火内衬的新建化学工业炉的受内压圆筒，封头和元件的强度计算，如气化炉、二段转化炉等。

Specification of strength calculation on pressure parts for chemical industrial furnace

HG/T 20583-2011 钢制化工容器结构设计规定

本标准适用于钢制化工容器设计中的通用性结构。 本标准不适用于专门的容器标准已规定的专用结构或特殊结构。

Specification of structural design for steel chemical vessels

HG/T 20580-2011 钢制化工容器设计基础规定

本标准是在《钢制压力容器》GB 150的基础上，结合工程设计的实际，对钢制化工容器的设计基础内容作补充和具体化。 本标准的适用范围，除另有规定外，均与《钢制压力容器》GB 150相同。

Specification of design base for steel chemical vessels

HG/T 21536-2011 化工工厂工业炉设计施工图内容深度统一规定

本规定适用于化工工厂工业炉设计施工图图样和技术文件的编制，包括新建、改建、扩建工程的设计施工图。

Unified specification on contents and procedure of working drawing for design of industrial furnace for chemical plants

TSG R7003-2011 气瓶制造监督检验规则

本规则适用于《气瓶安全监察规定》规定范围内气瓶的制造监检工作。

Gas Cylinder Manufacture Supervision Inspection Regulation

BS EN ISO 28721-1:2011 釉瓷和搪瓷.加工厂用玻璃衬里装置.装置,部件,器具和附件的质量要求

This part of ISO 28721 specifies the quality requirements for apparatus, components, appliances and accessories of glass-lined steel (including semi-crystallized enamel coatings) and glass-lined steel castings used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the action to be taken to repair defects. It is also applicable to glass-lined pumps, pump components and fittings. It is not applicable to glass-lined flanged steel pipes or glass-lined flanged steel fittings. NOTE 1 Provisions for glass-lined flanged steel pipes and glass-lined flanged steel fittings are given in DIN 2876 [1]. The test methods specified cover checking the enamel, the dimensional accuracy and the performance of apparatus and components. This part of ISO 28721 applies to new apparatus and components as well as used items that have been reenamelled. It does not contain requirements regarding the chemical or physical properties of vitreous and porcelain enamels. NOTE 2 Examples of test reports are given in Annex A.

Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for apparatus, components, appliances and accessories

BS EN ISO 28721-2:2011 釉瓷和搪瓷.加工厂的涂瓷釉设备.耐化学反应腐蚀和热冲击的设计和规范

This part of ISO 28721 specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes. It is applicable to enamelled apparatus, piping and other components primarily used for process equipment in chemical plants. It only applies to unalloyed and low-alloy carbon steels suitable for enamelling. NOTE The main criteria for assessing enamel quality are the resistance to chemical attack and thermal shock and the structure of the cover coat enamel.

Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Designation and specification of resistance to chemical attack and thermal shock

WJ 9063-2010 民用爆炸物品生产专用设备安全使用年限管理规定

Provisions on the management of the safe service life of special equipment for the production of civil explosives

ASME RTP-1-2011 增强热固塑料耐腐蚀设备

This document applies to stationary vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic head.

Reinforced Thermoset Plastic Corrosion-Resistant Equipment

ANSI/NFPA 214-2011 水冷却塔标准

1.1.1* This standard applies to fire protection for field-erected and factory-assembled water-cooling towers of combustible construction or those in which the fill is of combustible material. 1.1.2* Fire Risk Analysis. The following are some of the factors that shall be considered in determining the extent and method of fire protection required for induced-draft and natural-draft cooling towers: (1) Importance to continuity of operation (2)* Size and construction of tower (3) Type of tower (4) Location of tower (5) Water supply (6) Value of tower (7) Climate (8)* Water delivery time (9) Environment (10) Rooftop towers (11) Limited access (12) Construction of materials (See 1.1.3.) 1.1.3 Construction Materials of Cooling Towers. When the cooling towers' structure, fan and distribution decks, louvers, and fill materials are all of noncombustible materials, no fire protection is required. If any of these are combustible materials and the factors in 1.1.2 necessitate it, fire protection shall be provided in accordance with Chapter 3 and towers shall be located in accordance with Chapter 2. All other chapters shall be considered mandatory requirements.

Standard on Water-Cooling Towers

NF M87-209/A1:2010 石油、石化和天然气工业.压力释放和降压系统.修改件1

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems - Amendment 1.

UL 2208-2010 溶剂蒸馏装置

UL Standard for Safety Solvent Distillation Units (Third Edition; Reprint with Revisions Through and Including September 4, 2015)

BS ISO 16110-2:2010 利用燃料处理技术的氢气发生器.性能用试验方法

Hydrogen generators using fuel processing technologies - Test methods for performance

ANSI/ASSE 1049-2010 化学废物处理系统用个体和支型吸气阀(AAV's)的性能要求

These are individual and branch type AAV's for chemical waste systems to prevent the siphonage of trap seals for individual and multiple fixtures and prevent sewer gases from entering the building.

Performance Requirements for Individual and Branch Type Air Admittance Valves (AAV's) for Chemical Waste Systems