G95 橡胶、塑料用机械 标准查询与下载

JB/T 12787-2016 塑料成型模具温度控制机

Plastic mold temperature control machine

HG/T 4957~4958-2016 工程机械子午线轮胎成型机和轮胎胎面自动缠绕机（2016）

Construction machinery radial tire building machine and tire tread automatic winding machine (2016)

JB/T 12789-2016 转轮式塑料干燥机

Rotary plastic dryer

HG/T 4957-2016 工程机械子午线轮胎成型机

Engineering machinery radial tire building machine

EN 13611:2015/AC:2016 使用气体和/或液体燃料的燃烧器和燃烧器具安全和控制装置.一般要求

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements

DIN EN ISO 13802:2015 塑料.摆锤冲击试验机鉴定.却贝、艾卓德和拉伸冲击试验(ISO 13802-2015);德文版本EN ISO 13802-2015

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015); German version EN ISO 13802:2015

EN 14459:2015 使用气态或液态燃料的燃烧器和燃烧器具的安全和控制装置.电子系统中的控制功能.分类和评估方法

This European Standard specifies methods for the classification and assessment of function blocks designed to operate burners and appliances burning gaseous or liquid fuels with particular regards to their fault behaviour and preventative measures. This European Standard is applicable to control function blocks, not covered by a dedicated control standard (e. g. EN 88-1:2011, EN 88-2:2007, EN 125:2010, EN 126:2012, EN 126:2012/prA1:2014, EN 161:2011+A3:2013, EN 257:2010, EN 298:2012, EN 1106:2010, EN 1643:2014, EN 1854:2010, EN 12067-2:2004, EN 16304:2013 and EN 16340:2014, EN ISO 23553-1:2014).

Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment

JB/T 6490-2015 塑料压力成型机

Plastic pressure forming machine

JB/T 8698-2015 热固性塑料注射成型机

Thermosetting plastic injection molding machine

JB/T 5418-2015 聚丙烯不织布机

Polypropylene non-loom

JB/T 8943-2015 全塑鞋用注射机

Injection machine for all-plastic shoes

JB/T 6493-2015 塑料薄膜制袋机

Plastic film bag making machine

JB/T 6491-2015 异向双螺杆塑料挤出机

本标准规定了异向双螺杆塑料挤出机的基本参数、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于加工PVC塑料制品为主的异向双螺杆塑料挤出机。

Counter-rotating twin-screw plastics extruder

JB/T 6929-2015 塑料挤出转盘制鞋机

Plastic extrusion turntable shoe making machine

DIN EN 16474:2015 塑料和橡胶机械. 轮胎定型硫化机. 安全要求 ; 德文版本EN 16474-2015

Plastics and rubber machines - Tyre curing presses - Safety requirements; German version EN 16474:2015

EN 13611:2015 使用气体和/或液体燃料的燃烧器和燃烧器具安全和控制装置.一般要求

This European Standard specifies the general safety, design, construction, and performance requirements and testing for safety, control or regulating devices (hereafter referred to as controls) for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard is applicable to controls with declared maximum inlet pressure up to and including 500 kPa of nominal connection sizes up to and including DN 250. This European standard specifies general product requirements for the following controls: - automatic shut-off valves; - automatic burner control systems; - flame supervision devices; - gas/air ratio controls; - pressure regulators; - manual taps; - mechanical thermostats; - multifunctional controls; - pressure sensing devices; - valve proving systems; - automatic vent valves. This European standard applies for control functions that are not covered by a specific control standard for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard applies also for safety accessories and pressure accessories with a product of the maximum allowable pressure PS and the volume V of less than 600000 kPa - dm 3(6000 bar- litres) or with a product of PS and DN of less than 300000 kPa (3000 bar). This European Standard applies for AC and DC supplied controls (for controls supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks controls see Annex I). This European Standard is applicable to reset functions used for reset from lockout, e. g. due to ignition failure or temperature cut-out in burners and appliances (see Annex M). This European Standard establishes methodologies for the determination of a Safety Integrity Level (SIL) and the determination of a Performance Level (PL) (see Annex J, Annex K and Annex L). This European Standard gives guidelines for environmental aspects (see Annex N). This European Standard does not apply to mechanical controls for use with liquid fuels. The protection against environmental impact in open air (i.e. capable of withstanding UV radiation, wind, rain, snow, dirt deposits, condensation, ice and hoar frost (see IEV 441-11-05:2005), earthquake and external fire) is not covered by this standard. This European Standard should be used in conjunction with the specific control standard (see Bibliography).

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements (Incorporating corrigendum February 2016)

HG/T 4799-2015 轮胎均匀性检验机

本标准规定了轮胎均匀性检验机(以下简称检验机)的术语和定义，型号及基本参数，要求，试验，检验规则，标志、包装、运输和贮存。 本标准适用于在线检测轿车轮胎和载重汽车轮胎均匀性的检验机。

Tyre uniformity testing machine

HG/T 3686-2015 轿车子午线轮胎第二段成型机

本标准规定了轿车子午线轮胎第二段成型机(以下简称第二段成型机)的术语和定义，型号及基本参数，要求，试验，检验规则，标志、包装、运输和贮存。 本标准适用于两次法成型轿车子午线轮胎第二段成型机，也适用于两次法成型轻型载重汽车子午线轮胎第二段成型机。

Radial ply type second stage building machine

HG/T 4800-2015 轮胎X射线检验机

本标准规定了轮胎X射线检验机(以下简称检验机)的术语和定义，型号及基本参数，要求，试验，检验规则，标志、包装、运输和贮存。 本标准适用于使用X射线在线检测轿车轮胎、轻型载重汽车轮胎、载重汽车轮胎内部结构的检验机。

X-ray inspection machine for tyre

HG/T 4801-2015 环形胎面硫化机

本标准规定了环形胎面硫化机(以下简称硫化机)的术语和定义，型号及基本参数，要求，试验，检验规则，标志、包装、运输和贮存。 本标准适用于硫化环形胎面的芯模胀缩式硫化机。

Ring tread curing press