G95 橡胶、塑料用机械 标准查询与下载
共找到 491 条与 橡胶、塑料用机械 相关的标准，共 33 页
本标准规定了橡胶硫化罐主要项目的检测方法。 本标准适用于橡胶硫化罐(以下简称硫化罐)的检测。
Testing and measuring methods for rubber autoclave
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了帘布筒贴合机（以下简称贴合机）的术语和定义、型号与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于套筒法制造斜交轮胎用帘布筒贴合机。
Band building machine
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了预硫化翻新轮胎硫化罐的术语和定义、型号及基本参数、要求、试验、检验规则和标志、包装、运输及贮存等。 本标准适用于以电加热或以蒸汽、导热油为传热介质的预硫化翻新轮胎硫化罐（以下简称硫化罐）。
Pre-cure autoclave of retreading tyre
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了平板硫化机的主要精度及性能的检测和安全要求的检测方法。 本标准适用于平板硫化机的检测。
Testing and measuring methods for daylight press
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了轿车、轻型载重汽车和载重汽车子午线轮胎成型机的术语和定义、系列和基本参数。 本标准适用于轿车、轻型载重汽车和载重汽车子午线轮胎的成型机。
Series of radial tyre building machine
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了胶囊硫化机（以下简称硫化机）的型号、规格与基本参数、技术要求、安全要求、试验、检验规则、标志、包装和贮存等。 本标准适用于硫化胶囊的模压式硫化机和注射式硫化机。
Bladder curing press
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-12-20
- 实施
- 2012-07-01
Plastics and rubber machines - Extruders and extrusion lines - Part 1 : safety requirements for extruders.
- ICS
- 83.200
- CCS
- G95
- 发布
- 2011-12-01
- 实施
- 2011-12-09
This European Standard deals with all significant hazards, hazardous situations and events relevant to thermoforming machines for continuous sheet and single sheets of thermoplastics materials,when they are used as intended and under conditions of misuse which are foresseable by the manufacturer(see Clause 4).
Plastics and rubber machines - Thermoforming machines - Safety requirements; German version EN 12409:2008+A1:2011
- ICS
- 83.200
- CCS
- G95
- 发布
- 2011-12
- 实施
Plastics and rubber machines. Extruders and extrusion lines. Safety requirements for extruders
- ICS
- 83.200
- CCS
- G95
- 发布
- 2011-10-31
- 实施
- 2011-10-31
本标准规定了塑料机械用螺杆、机筒的要求、试验及检测方法、检验规则、标志、包装、运输和贮存。 本标准适用于单螺杆塑料挤出机和塑料注射成型机等塑料机械用螺杆和机筒。
Screw and barrel for plastics machinery
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-08-15
- 实施
- 2011-11-01
本标准规定了塑料挤出吹塑薄膜辅机的规格系列与型号、基本参数、要求、试验及检测方法、检验规则、标志、包装、运输和贮存。 本标准适用于吹塑薄膜制品的塑料挤出吹塑薄膜辅机（以下简称辅机）。
Plastics blown-film extrusion accessory
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-08-15
- 实施
- 2011-11-01
本标准规定了单螺杆塑料挤出机的规格系列与型号、基本参数、要求、试验及检测方法、检验规则、标志、包装、运输和贮存。 本标准适用于加工塑料制品的单螺杆塑料挤出机（以下简称挤出机），不适用于专用挤出机。
Plastics single-screw extruder
- ICS
- 71.120;83.200
- CCS
- G95
- 发布
- 2011-08-15
- 实施
- 2011-11-01
This Eropean Standard specifies safety requirements relating to the design and construction of multi-roll calenders intended for the processing of rubber or plastics. This standard concerns the calender alone including all components fixed to its frame. The following machines are excluded: - Two-roll calenders forming an integral unit with an extruder (roller head) - Two- or three-roll polishing, laminating or embossing units ( which are not calenders) installed downstream of extruders in film processing lines.
Plastics and rubber machines - Calenders - Safety requirements; German version EN 12301:2000+A1:2008
- ICS
- 83.200
- CCS
- G95
- 发布
- 2010-02
- 实施
- 2010-02-01
The document gives the technical safety requirements for the design and construction of injection moulding machines for plastics and rubber. Suitable measures shall be taken with the design and construction so that persons working with the machines, or in their vicinity, are not endangered. Specifications about safety requirements, construction, design, hazards, guarding and interlocking are described in several paragraphs.
Plastics and rubber machines - Injection moulding machines - Safety requirements; German version EN 201:2009
- ICS
- 25.120.20;83.200
- CCS
- G95
- 发布
- 2010-02
- 实施
- 2010-02-01
This standard specifies the essential safety requirements applicable to the design and construction of strand pelletisers used for plastics and rubber and fed continuously by an extruder or a reactor.
Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers; German version EN 12012-2:2001+A2:2008
- ICS
- 83.200
- CCS
- G95
- 发布
- 2010-02
- 实施
- 2010-02-01
This standard specifies the essential safety requirements applicable to the design and construction of shredders used for plastic and rubber. The machine begins with the outer edge of the feed hopper and ends with the discharge area. Significant hazards are listed in clause 4, specific requirements and/or measures applicable to shredders are listed in clause 5. This standard applies primarily to machines which are manufactured after the date of publication of this standard.
Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders; German version EN 12012-3:2001+A1:2008
- ICS
- 83.200
- CCS
- G95
- 发布
- 2010-02
- 实施
- 2010-02-01
This standard specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules.
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators; German version EN 12012-1:2007+A1:2008
- ICS
- 83.200
- CCS
- G95
- 发布
- 2010-02
- 实施
- 2010-02-01
This European Standard specifies the essential safety requirements for injection moulding machines for the processing of plastics and/or rubber. All hazards listed in Clause 4 are covered by this standard. The following machines are not covered: - machines on which the clamping unit can only be operated by the physical force of the operator; - injection moulding machines with pneumatic drives for the platen movement; - injection moulding machines with vertical platen movements driven by an electrical axis; - blow moulding machines associated with an injection process (EN 422); - machines for reaction injection moulding (RIM) (EN 1612-1); - presses (EN 289); - footwear moulding machines covered by EN 1845. The safety requirements for the interaction between injection moulding machines and ancillary equipment are specified. This standard covers magnetic clamping systems only if: - machines have horizontal clamping units; and - the mould area is protected by guards; and - such systems are delivered at the same time as the injection moulding machine by the machine manufacturer. This standard does not cover requirements for the design of an exhaust system. This standard is not applicable to injection moulding machines which are manufactured before the date of its publication as an EN.
Plastics and rubber machines - Injection moulding machines - Safety requirements
- ICS
- 25.120.20;83.200
- CCS
- G95
- 发布
- 2010-01-31
- 实施
- 2010-01-31
The document contains safety requirements for the design and construction of the following kinds of die face pelletisers used with extruders for pelletising of plastics and rubber: Underwater pelletisers, water ring pelletisers, dry pelletisers, centrifugal pelletisers, knife rotor pelletisers. Strand pelletisers are not subject to standard. They are dealt with in a separate standard being produced by CEN/TC 145/WG 6.
Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers; German version EN 1114-2:1998+A1:2008
- ICS
- 83.200
- CCS
- G95
- 发布
- 2010-01
- 实施
- 2010-01-01
The document covers the essential health and safety requirements for all two roll mills for the processing of rubber and plastics. It does not cover requirements for the design of an exhaust system.
Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:1996+A1:2008
- ICS
- 83.200
- CCS
- G95
- 发布
- 2010-01
- 实施
- 2010-01-01
