共找到 1636 条与 钢铁与铁合金分析方法 相关的标准,共 110 页
本文件描述了用波长色散X射线荧光光谱法测定铬、硅、锰、钛、钒及铁的含量。 本文件适用于中高碳铬铁合金中铬、硅、锰、钛、钒及铁含量的测定。各元素测定范围见表1。表1 元素及测定范围分析元素测定范围(质量分数)%铬(Cr)45.00~70.00 锰(Mn)0.150~0.400 硅(Si)钛(Ti)钒(V)铁(Fe)0.500~4.000 0.050~0.450 0.120~0.250
Ferrochromium—Determination of chromium, silicon, manganese, titanium, vanadium, iron contents—Wavelength dispersive X-ray fluorescence spectrometry (fused cast bead method)
GB/T5687 的本部分规定了采用电感耦合等离子体原子发射光谱法 (ICPAES)测定磷、铝、钛、铜、锰、钙等元素含量的方法。 本部分适用于铬铁中磷、铝、钛、铜、锰、钙含量的测定,硅铬合金相应元素的测定也适用于本部分。 各元素测定范围见表 1。
Ferrochromium—Determination of phosphorus, aluminum, titanium, copper, manganese, calcium content—Inductively coupled plasma atomic emission spectrometric method
GB/T8704 的本部分规定了硫酸脱水重量法和硅钼蓝分光光度法测定硅含量。 本部分适用于钒铁中硅含量的测定,测定范围(质量分数):0.10%~3.50%。
Ferrovanadium—Determination of silicon content—The sulfuric acid dehydration gralimetric method and the silicomolybdic blue photometric method
GB/T8704 的本部分规定了用硫酸亚铁铵可视滴定法和硫酸亚铁铵电位滴定法测定钒含量。 本部分适用于钒铁中钒含量的测定。 测定范围(质量分数):35.00%~85.00%。
Ferrovanadium—Determination of vanadium content—The ammonium ferrous sulfate titrimetric method and the potentiometric titrimetric method
GB/T8704 的本部分规定了电感耦合等离子体发射光谱法测定硅、锰、磷、铝、铜、铬、镍、钛的含量。 本部分适用于钒铁中硅、锰、磷、铝、铜、铬、镍、钛含量的测定,各元素测定范围见表 1。
Ferrovanadium—Determination of silicon, manganese, phosphorus, aluminum, copper, chromium, nickel and titanium contents— Inductively coupled plasma atomic emission spectrometric method
GB/T223 的本部分规定了用蒸馏分离靛酚蓝分光光度法测定钢铁及合金中氮含量的方法。本部分适用于低合金钢中质量分数在0.0006%~0.050%范围内和高合金钢中质量分数在0.010%~0.050%范围内氮含量的测定。本部分不适用于含氮化硅或硅含量超过0.6%的钢铁及合金中氮含量的测定。
Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation
GB/T3653 的本部分规定了红外线吸收法测定硼铁中硫含量的方法。本部分适用于硼铁中硫含量的测定。测定范围(质量分数):0.0020%~0.025%。
Ferroboron—Determination of sulfur content—Infrared absorption method
GB/T4702 的本部分规定了钽试剂三氯甲烷萃取分光光度法测定钒含量。本部分适用于金属铬中钒含量的测定,测定范围(质量分数):0.010%~0.500%。
Chromiun metal—Determination of vanadium content—Tantalum reagent trichloromethane extraction spectrophtometry method
Ferrosilicon—Determination of silicon content—Perchloric acid dehydration gravimetric method and potassium fluosilicate volumetric method
Vanadium-nitrogen—Determination of sulfur content—Infrared absorption method
Iron, steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
Vanadium-nitrogen—Determination of vanadium content—Ammonium ferrous sulfate titration method
Ferroniobium—Determination of silicon content—Gravimetric method
Vanadium-nitrogen—Determination of nitrogen content—Thermal conductimetric method after fusion in a current of inert gas
Vanadium-nitrogen—Determination of silicon, manganese, phosphorus, aluminum content—Inductively coupled plasma atomic emission spectrometric method
Ferrosilicon—Determination of chromium content—Diphenylcarbazide spectrophotometric method
Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
Vanadium-nitrogen—Determination of carbon content—Infrared absorption method
Vanadium-nitrogen—Determination of phosphorus content—Bismuth molybdenum blue spectrophotometric method
Vanadium-nitrogen—Determination of nitrogen content—Distillation-neutralization titration method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号