共找到 1636 条与 钢铁与铁合金分析方法 相关的标准,共 110 页
本标准规定了用电感耦合等离子体质谱法(ICP-MS)测定钢铁中痕量锡、锑、铈、铅和铋的分析方法。 本标准适用于以下质量分数(μg/g)范围的痕量元素的测定:锡5 μg/g~200 μg/g,锑1 μg/g~200 μg/g,铈10 μg/g~1 000 μg/g,铅0.5 μg/g~100 μg/g,铋0.3 μg/g~30 μg/g。 电感耦合等离子体质谱法测定痕量元素干扰列于附录B。
Steel and iron.Determination of tin, antimony, cerium, lead and bismuth.Inductively coupled plasma mass spectrometric method
本标准规定了电感耦合等离子体质谱法测定铅和镉含量的方法”本标准适用于钢板及钢带纯锌、锌铁、锌铝和铝锌合金镀层中铅和镉含量的测定,测定范围分别为Pb=20′O#g/gN2 000.0 #g/g'Cd︰5﹤0 #g/gN2 000.0 ﹞g/g”
Zinc and aluminum based coatings on steel sheets and strips.Determination of lead and cadmium contents.Inductively coupled plasma mass spectrometric method
本标准规定了二苯碳酰二肼分光光度法测定六价铬含量的方法。 本标准适用于钢板及钢带表面锌及锌合金镀层,其中包括镀纯锌、锌铁合金、锌铝和铝锌合金表面六价铬含量的测定。测定范围:2 μg/g~100 μg/g或0.020 μg/cm~10 μg/cm。
Zinc or zinc alloy coating on steel sheets or strips.Determination of hexavalent chromium content.1,5-Diphenylcarbohydrazide (diphenylcarbazide) spectrophotometric method
本标准规定了辉光放电原子发射光谱法测定铅、镉和铬的含量。 本标准适用于1 μm~50 μm镀层厚度的钢板及钢带表面纯锌、锌铁、锌铝、铝锌镀层中铅镉铬元素含量的测定。测定范围(质量分数):铅:0.003 5%~0.2%;镉:0.003%~0.2%;铬:0.002%~0.02%。
Zinc and aluminum based coatings on steel sheets and strips.Determination of lead,cadmium and chromium contens.Glow discharge atomic emission spectrometry method
本标准规定了丁二酮肟重量法测定含镍生铁中镍含量的方法。 本标准适用于含镍生铁中镍含量的测定。测定范围(质量分数):2.00%~20.00%。
Nickel pig iron.Determination of nickel content.dimethylglyoxime gravimetric method
GB/T 5059的本部分规定了孔雀绿分光光度法测定钼铁中锑含量的方法.本部分适用于钼铁中锑含量的测定。测定范围(质量分数):0.005%~0.120%。
Ferromolybdenum.Determination of antimony content.Malachite green spectrophotometric method
GB/T 5059的本部分规定了火焰原子吸收光谱法测定钼铁中铜含量的方法。本部分适用于钼铁中铜含量的测定。测定范围(质量分数):0.10%~1.20%。
Ferromolybdenum.Determination of copper content.The flame atomic absorption spectrometric method
GB/T5059 的本部分规定了钼酸铅亘量法、偏钒酸铵滴定法和8一羟基喹啉亘量法测定钼铁中钼含量的方法。 本部分适用于钼铁中钼含量的测定″测定范围〈质量分数)=50,00%N75′OO%”
Ferromolybdenum.Determination of molybdenum content.Lead molybdate gravimetric method, ammonium metavanadate titration method and 8-hydroxyquinoline gravimetric method
GB/T 5059的本部分规定了硫酸脱水重量法和硅钼蓝分光光度法测定钼铁中硅含量。本部分适用于钼铁中硅含量的测定。测定范围(质量分数):方法一硫酸脱水重量法0.50%~2.50%,方法二硅钼蓝分光光度法0.01%~1.00%。
Ferromolybdenum.Determination of silicon content.Sulphuric acid dehydration gravimetric method and molybdenum blue spectrophotometric method
GB/T5059 的本部分规定了红外线吸收法测定钼铁中碳含量的方法。 本部分适用于钼铁中碳含量的测定。 测定范围〈质量分数)=0.OlO%N0.4OO%。
Ferromolybdenum.The determination of carbon content.Infrared absorption method
本标准规定了用EDTA滴定法测定镍铁中的镍含量。本标准适用于镍铁中镍含量的测定。测定范围(质量分数):12.00%~85.00%。
Ferronickel.Determination of nickel content.EDTA titrimetric method
本标准规定了 X射线荧光光谱法测定含铁尘泥中成分的原理、试剂与材料、仪器与设备、试样、玻璃样片的制备、X射线荧光光谱分析、试验报告、精密度等。本标准适用于炼铁、炼钢含铁尘泥中全铁、二氧化硅、氧化钙、氧化镁、三氧化二铝、二氧化钛、氧化锰、五氧化二磷和氧化锌九种化学成分的X射线荧光光谱同时测定,测定范围列入表1。
Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method
GB/T 223的本部分规定了用火焰原子吸收光谱法测定钢铁中钴含量。本部分适用于钢铁及合金中质量分数为0.003%~5.0%钴含量的测定。
Steel, iron and alloy.Determination of cobalt content.Flame atomic absorption spectrometric method
本标准规定了化学成分分析测量不确定度评定的通用规范以及重量法、滴定法、分光光度法、原子吸收光谱法、氢化物发生-原子荧光光谱法、电感耦合等离子体原子发射光谱法、火花放电原子发射光谱法、X射线荧光光谱法、红外吸收法和热导法、气体容量法测定碳含量测量不确定度评定方法。本标准适用于冶金材料化学成分分析测量不确定度的评定。
Evaluation of uncertainty in chemical composition analysis for metallurgical materials
本标准规定了用重量法测定单位面积镀层质量的方法,以及用电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法测定钢表面锌基和(或)铝基镀层单位面积镀层质量和化学成分的方法。 本标准所述钢表面锌基和(或)铝基镀层,包括热镀和电镀纯锌镀层、热镀锌铁合金镀层、电镀锌镍合金镀层、热镀铝锌镀层(5%铝)和热镀铝锌镀层(55%铝)等。 本标准适用的测定范围为40%~100%锌含量(质量分数)、0.02%~60%铝含量(质量分数)、7%~20%镍含量(质量分数)、0.2%~20%铁含量(质量分数)、0.2%~10%硅含量(质量分数)。 用火焰原子吸收光谱法测定镀层化学成分的方法不适用于锌含量的测定。 本标准的测定方法可作为仲裁方法。
Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
本标准规定了用电感耦合等离子体原子发射光谱法测定镧、铈和镁的方法。 本方法适用于铸铁和低合金钢中镧、铈和镁含量的测定。具体内容请见本标准。
Cast iron and low alloy steel-Determination of lanthanum,cerium and magnesium content-Inductively coupled plasma atomic emission spectrometric method
GB/T 24583的本部分规定了铋磷钼蓝分光光度法测定磷含量。 本部分适用于钒氮合金中磷含量的测定。测定范围(质量分数):0.010%~0.100%。
Vanadium-Nitrogen alloy.Determination of phosphorus content.The bismuth molybdenum blue spectrophotometry method
警告:使用本部分的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关规定条件 GB/T 24583的本部分规定了红外线吸收法测定碳含量。 本部分适用于钒氮合金中碳含量的测定。测定范围(质量分数):1.00%-15.00%。
Vanadium.Nitrogen alloy.Determination carbon of content.The infrared absorption method
GB/T 223的本部分规定了用感应炉燃烧后红外吸收法测定钢铁中硫含量的方法。 本方法适用于质量分数为1.10%~0.35%硫含量的测定。
Steel and iron.Determination of high sulfur content.Infrared absorption method after combustion in an induction furnace
GB/T 24583的本部分规定了红外线吸收法测定硫含量。 本部分适用于钒氮合金中硫含量的测定。测定范围(质量分数):0.010%~0.150%。
Vanadium-Nitrogen alloy.Determination of sulfur content.The infrared absorption method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号