H42 铁合金 标准查询与下载

ASTM A482-05(2010) 铬铁硅标准规范

1.1 This specification covers several grades of ferrochrome-silicon.

Standard Specification for Ferrochrome-Silicon

ASTM F256-05(2010) 含有18%或26%铬的铬铁密封合金的标准规范

1.1 This specification covers two chromium-iron alloys, the former, (UNS K91800), nominally 18 % chromium, balance iron, the latter, (UNS K92801), nominally 28 % chromium, in strip, bar, wire, and rod forms intended primarily for sealing to glass in electronic applications. Note 18212;UNS K92801 should only be considered for use at service temperatures below 300°C. The alloy is prone to sigma phase formation at temperatures close to 620°C, and exhibits brittle mechanical behavior after prolonged exposures at temperatures close to 475°C. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following hazard caveat pertains only to the test method portion, Sections 16 and 17, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

ASTM A323-05(2015) 硼铁的标准规格

1.1 This specification covers several grades of ferroboron. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

Standard Specification for Ferroboron

DIN 17569:2004 铌铁.交货技术条件

This standard specifies requirements for ferroniobium to be used in foundries and in steel industries.

Ferroniobium - Technical delivery conditions

DIN 17564:2004 锰铁、锰铁硅和锰.交货技术条件

This standard specifies requirements for ferromanganese, ferromanganese-silicon and manganese to be used in foundries and in steel industries.#,,#

Ferromanganese, Ferromanganese-Silicon and Manganese - Technical delivery conditions

DIN 17567:2004 硼铁.交货技术条件

This standard specifies requirements for ferroboron to be used in steel industries.

Ferroboron - Technical delivery conditions

DIN 17562:2004 钨铁.交货技术条件

This standard specifies requirements for ferrotungsten to be used in foundries and in steel industries.

Ferrotungsten - Technical delivery conditions

DIN 17560-1:2004 硅铁和硅.第1部分:硅铁的交货技术条件

This standard specifies requirements for ferrosilicon to be used in foundries and in steel industries.

Ferrosilicon and Silicon - Part 1: Technical delivery conditions for ferrosilicon

DIN 17561:2004 钼铁.交货技术条件

This standard specifies requirements for ferromolybdenum to be used in foundries and in steel industries as well as for welding electrodes.

Ferromolybdenum - Technical delivery conditions

DIN 17580:2004 硅钙合金.交货技术条件

This standard specifies requirements for calcium-silicon to be used in foundries and in steel industries.

Calcium-Silicon - Technical delivery conditions

DIN 17560-2:2004 硅铁和硅.第2部分:硅的交货技术条件

This standard specifies requirements for silicon to be used in aluminium and in steel industries (as alloy element) and in chemical industries (to produce silicone and semiconductors).

Ferrosilicon and Silicon - Part 2: Technical delivery conditions for silicon

DIN 17566:2004 钛铁.交货技术条件

This standard specifies requirements for ferrotitanium to be used in foundries and in steel industries.

Ferrotitanium - Technical delivery conditions

DIN 17563:2004 钒铁.交货技术条件

This standard specifies requirements for ferrovanadium to be used in foundries and in steel industries.

Ferrovanadium - Technical delivery conditions

DIN 17565:2004 铬铁、硅铬铁和铬.交货技术条件

Ferro-Chromium, Ferro-Chromium-Silicon and Chromium - Technical delivery conditions

ASTM A100-04 硅铁的标准规范

1.1 This specification covers grades of ferrosilicon for steelmaking and foundry uses.1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units (SI units) given in parentheses may be approximate.

Standard Specification for Ferrosilicon

ASTM A144-04 钨铁合金规范

1.1 This specification covers four grades of ferrotungsten.

Specification for Ferrotungsten

ASTM A102-04(2009) 钒铁的标准规范

1.1 This specification covers one grade of ferrovanadium. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Ferrovanadium

ASTM A101-04 铬铁的标准规范

1.1 This specification covers two types of ferrochromium designated as high carbon and low carbon, the latter including nitrogen-bearing and vacuum grades. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

Standard Specification for Ferrochromium

ASTM A102-04 钒铁合金的标准规范

1.1 This specification covers one grade of ferrovanadium.1.2 The values given in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Ferrovanadium

ASTM F15-04 铁-镍-钴密封合金的标准规范

1.1 This specification covers an iron-nickel-cobalt alloy, UNS K94610 containing nominally 29 % nickel, 17 % cobalt, and 53 % iron, in the forms of wire, rod, bar, strip, sheet, and tubing, intended primarily for sealing to glass in electronic applications.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 The following hazard caveat pertains only to the test method portion, Sections 13 and 14 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Iron-Nickel-Cobalt Sealing Alloy