H52 铁道用钢 标准查询与下载

NF A45-330:1990 钢铁.设备用导轨.UIC54A型转辙轨及其鱼尾板

Iron and steel. Rail for equipment. UIC 54A switch rail and its fishplate.

NF A45-324:1990 钢铁.35G TF槽形钢轨及其鱼尾板

Iron and steel. 35 G.TF grooved rail and its fish plates.

NF A45-323:1990 钢铁.35G SF槽形钢轨及其鱼尾板

Iron and steel. 35 G.SF grooved rail and its fish plates.

JIS E 1123:1989 端部淬火钢轨

この規格は，JIS E 1101(普通レール)に規定するレールの端頭部にスラッククエンチ式の熱処理を施した鉄道用レール(以下，レールという。)について規定する

End hardened rails

JIS C 2812:1988 机器安装用钢轨

Mounting rails for devices

JIS E 1110:1988 普通钢轨垫板

Tie plates

JIS E 1124:1988 调质热处理钢轨

Head hardened rails by slack quenching method

BS 5892-5:1987 铁路车辆材料(米制).第5部分:轮箍式车轮扣环用钢棒规范

This Part of as 5892 specifies requirements for the material and the cross-sectional dimensions for three types of steel bar used to manufacture retaining rings for tyred wheels on traction and trailing stock. Requirements for mechanical properties, re-tests and marking are also given. NOTE. The titles of the publications referred to in this standard are listed on the inside back cover.

Railway rolling stock material (metric) - Part 5.Specification for steel bars for retaining rings for tyred wheels

ISO 1005-8:1986 铁路车辆材料 第8部分:牵引和拖动的车轮实心轮 尺寸和平衡要求

Specifies the dimensional requirements, the surface roughness and the residual unbalance of forged, rolled or cast solid wheels with curved or straight webs in various degrees or finish. In addition to this requirements, the general technical delivery requirements of ISO 404 apply.

Railway rolling stock material; Part 8 : Solid wheels for tractive and trailing stock; Dimensional and balancing requirements

ISO 1005-4:1986 铁路车辆材料 第4部分:牵引和拖动的车轮的轧制或锻造的轮体 质量要求

Specifies requirements for the manufacture and supply of rolled or forged wheel centres for tractive and trailing stock, which are suitable for tyring and are made of unalloyed steels in accordance with table 1 and clause 4. Spoked wheel centres are not covered. In addition to this part of ISO 1005, the requirements of ISO 404 are applicable.

Railway rolling stock material; Part 4 : Rolled or forged wheel centres for tyred wheels for tractive and trailing stock; Quality requirements

ISO 1005-2:1986 铁路车辆材料 第2部分:牵引和拖动的车轮、轮体和轮箍 尺寸、平衡和组装要求

Specifies the dimensional requirements, the surface roughness and, as appropriate, the permissible residual static unbalance for tyres, wheel centres and tyred wheels in the various degrees of finish, and in addition the manufacturing requirements for tyred wheels. For quality requirements for tyres and wheel centres and technical delivery requirements see ISO 1005-1, ISO 1005-4, and ISO 404, respectively.

Railway rolling stock material; Part 2 : Tyres, wheel centres and tyred wheels for tractive and trailing stock; Dimensional, balancing and assembly requirements

ISO 8007:1985 制铝用碳质材料.从阴极毛坯和预焙阳极取样.总则

Carbonaceous materials used in the production of aluminium; Sampling from cathodic blocks and prebaked anodes; General

BS 11:1985 铁轨规范

Specifies the requirements for the quality of steel, dimensions, tolerances and technical condition of railway rails of 24.8 kg/mand greater linear mass.

Specification for railway rails

ASTM A759-85(1992) 起重机用碳钢轨条的标准规范

1.1 This specification covers carbon steel crane rails of special designs only, and nominal weights of 104 lb/yd (51.6 kg/m) through 175 lb/yd (86.8 kg/m) for crane runway use. 1.2 When standard tee rail sections are desired, they shall be ordered in accordance with Specification A1. 1.3 Supplementary Requirements S1 through S4 of an optional nature are provided. They shall apply only when specified by the purchaser in the order. 1.4 The values stated in inch-pound units are to be regarded as the standard.

Standard Specification for Carbon Steel Crane Rails

NF A45-309:1984 钢铁产品.热轧材.每米26kg重平底轨和鱼尾板

Iron and steel products. Hot-rolled. 26 kg/m flat bottom railway rail and fishplates.

NF A45-310:1984 钢铁产品.热轧制.每米30kg重平底钢轨和鱼尾板

Iron and steel products. Hot-rolled. 30 kg/m flat bottom railway rails and fishplates.

NF A45-313:1984 钢铁产品.热轧制.每米46kg重平底钢轨和鱼尾板

Iron and steel products. Hod-rolled. 46 kg/m flat bottom ralway rail and fishplate.

NF A45-316:1984 钢铁产品.热轧制.每米55kg重平底钢轨和鱼尾板

Iron and steel products. Hod-rolled. 55 kg/m flat bottom railway rail and fishplate.

DLA MIL-S-37963-1984 伸缩半环托马斯腿夹板

Tnis specificabion covers a telescoping splint, suitable for use in Uainobilizacion of' fractures and treatment of injuries to the lower

SPLINT, LEG THOMAS, HALF-RING, TELESCOPING

NF A45-311:1983 钢铁.热轧材.每米36kg重带鱼尾板的阔脚轨

Iron and steel. Hot-rolled products. Vignole type 36 kg/m rail with fish-plate.