H90 冶金机械设备综合 标准查询与下载

EN 12420:2014 铜及铜合金.锻件

This European Standard specifies the composition, the property requirements and tolerances on dimensions and form for copper and copper alloy die and hand forgings. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.

Copper and copper alloys - Forgings

YB/T 029-2010 通用型球形补偿器技术条件

Specifications for Universal Spherical Compensator

YS/T 737-2010 铝电解槽系列不停电停、开槽装置

本标准规定了铝电解槽系列不停电停、开槽装置(以下简称装置)的要求、试验方法及标志、包装、运输、贮存等。 本标准适用于铝电解槽系列不停电停、开槽的装置。

Equipment for cutting in/out aluminium cells with full current

YS/T 3000-2010 活性炭再生炉技术规范

本标准规定了活性炭再生炉的技术性能、工艺过程、技术要求、试验方法、检验规则及标志、质量保证期、包装、运输和贮存。 本标准适用于活性炭再生炉（以下简称再生炉）。

Activated carbon regenerator technical specification

YS/T 3001-2010 载金活性炭解吸电解设备技术规范

本标准规定了载金活性炭解吸电解设备的基本参数、工艺流程、技术要求、试验方法、检验规则及质量保证期、标志、包装、运输和贮存的要求。 本标准适用于载金活性炭解吸电解设备。

Gold loaded carbon desorption electrolysis equipment technical specification

DB36/T 600-2010 蓄热式熔铝反射炉

Regenerative aluminum melting reverberatory furnace

DIN EN 14681:2010 机械安全性.使用电弧炉制造钢用机械和设备的安全性要求.德文版本EN 14681-2006+A1-2010

This European standard specifies the general safely requirements for electric acr furnaces(EAF) to melt steel not containing radioactive material.

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces; German version EN 14681:2006+A1:2010

NF E88-031*NF EN 13675+A1:2010 机械安全性.管道成型和滚轧机及其精整线设备的安全性要求

Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment.

YB/T 4208-2009 冶金用金属冷切圆锯片

本标准规定了治金用金屬冷切圓鋸片的結構型式，基本參數及尺寸標記、技术要求，检验方法，检验 規則標誌，包裝运输、儲存、使用和维护。 本标准适用于在常溫狀態下鋸切管材、型鋼等鋼材的金屬冷切圓鋸片。

Circular saw blades for metal cold cutting for metallurgy

JB/T 2628-2010 轧钢车间加热炉齿条式推钢机 基本参数

本标准规定了轧钢车间加热炉用齿条式推钢机的基本参数。 本标准适用于轧钢车间加热炉用齿条式推钢机,亦适用于液压式推钢机。其用途是将钢坯(锭)连续推入、推出(当加热炉测出料时,它要和出钢机联合作用)加热炉。

The basic data for rack pusher of furnace in rolling mill

YB/T 087-2009 冶金设备用回转支承

本标准规定了冶金设备用回转支承的结构形式、基本参数技术要求、试验方 法、检验规则、标志、包装、运输和贮存。 本标准适用于工作环境温度为 -40℃ ~ 120℃ 的回转支承。

Slewing bearings for metallurgical equipment

BS EN 14753:2007 机械安全.钢的连续浇铸用机械和设备的安全要求

This European Standard applies for plant (containing machinery and equipment) used in the process of continuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1 and illustrated in Annex B. This European Standard deals with all significant hazards, hazardous situations and events relevant to machinery and equipment for the continuous casting of steel, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the safety requirements to be met during design, assembly, transport, commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment. This European Standard assumes that the machinery and equipment of the plant is operated and maintained by adequately trained and competent personnel (see 7.4). Manual intervention for setting, adjustment and maintenance is accepted as part of the intended use of the plant. This European Standard assumes that the machinery is used with adequate workplace lighting conforming to EN 12464-1. NOTE Local regulations regarding lighting should be considered and could differ from requirements of EN 12464-1. This European Standard applies to: CCM for the transformation of molten liquid steel into solid products in sections (e.g. square, rectangular, beam blank, circular)  from the point where overhead cranes or other transport systems deposit ladles (e.g. in a ladle turret or ladle car);  via casting process;  via cutting equipment;  to the run-out-area where the cut product is collected. This European Standard does not cover safety requirements for:  auxiliary plants (e.g. water treatment, refractory handling);  ladles;  cranes;  winches and hoists;  conveyors or handling systems. This European Standard is not applicable to CCM, manufactured before the date of publication of this standard by CEN.

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel

YS/T 9-2008 阳极炭块堆垛机组

本标准规定了阳极炭块堆垛机组（以下简称机组）的要求、试验方法、检验规则及标志、包装、运输等。 本标准适用于铝电解企业或铝电解用阳极生产企业阳极炭块仓库用的堆垛机组。

Anode stacking crane

YS/T 7-2008 铝电解多功能机组

本标准规定了铝电解多功能机组（以下简称机组）的要求、试验方法、检验规则及标志、包装、运输等。 本标准适用于铝电解多功能机组。

Pot tending machine

YS/T 10-2008 阳极焙烧炉用多功能机组

本标准规定了阳极焙烧炉用多功能机组（以下简称机组）的要求、试验方法、检验规则及标志、包装、运输等。 本标准适用于阳极焙烧炉用多功能机组。

Furnace tending assembly

DIN EN 14753:2008 机械安全.连续铸钢机械和设备的安全要求

This European Standard applies for plant (containing machinery and equipment) used in the process of continuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1 and illustrated in Annex B. This European Standard deals with all significant hazards, hazardous situations and events relevant to machinery and equipment for the continuous casting of steel, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the safety requirements to be met during design, assembly, transport, commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment. This European Standard assumes that the machinery and equipment of the plant is operated and maintained by adequately trained and competent personnel (see 7.4). Manual intervention for setting, adjustment and maintenance is accepted as part of the intended use of the plant. This European Standard assumes that the machinery is used with adequate workplace lighting conforming to EN 12464-1. NOTE Local regulations regarding lighting should be considered and could differ from requirements of EN 12464-1. This European Standard applies to: CCM for the transformation of molten liquid steel into solid products in sections (e.g. square, rectangular, beam blank, circular) -- from the point where overhead cranes or other transport systems deposit ladles (e.g. in a ladle turret or ladle car); -- via casting process; -- via cutting equipment; -- to the run-out-area where the cut product is collected. This European Standard does not cover safety requirements for: -- auxiliary plants (e.g. water treatment, refractory handling); -- ladles; -- cranes; -- winches and hoists; -- conveyors or handling systems. This European Standard is not applicable to CCM, manufactured before the date of publication of this standard by CEN.

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel; English version of DIN EN 14753:2008-03

NF E88-040:2007 机械安全.带材加工线机械和设备的安全要求

Safety of Machinery - Safety requirements for strip processing line machinery and equipment.

BS EN 15061:2007 机械安全.带材加工线机械和设备的安全要求

This European Standard defines the health and safety requirements of strip processing lines (see 3.1). This European Standard deals with all significant hazards, hazardous situations and events relevant for strip processing line machinery and equipment, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse. This European Standard specifies the requirements to ensure the safety of persons which are to be considered and met during the design, assembly, transport, commissioning, operation, maintenance and decommissioning of the equipment.

Safety of machinery — Safety requirements for strip processing line machinery and equipment

JB/T 5000.14-2007 重型机械通用技术条件.第14部分:铸钢件无损检测

JB/T 5000的本部分规定了铸钢件的超声波检测、射线检测、磁粉检测和渗透检测及其相应的质量等级。 本部分适用于重型机械用铸钢件。其中，超声波检测适用于厚度不小于3Omm的碳钢和低合金钢铸件：不适用于奥氏体铸钢件。射线检测适用于厚度5mm～300mm的铸钢件。磁粉检测适用于铁素体铸钢件表面及近表面缺陷的检验。渗透检测适用于铸钢件表面开口性缺陷的检验。 凡采用本部分规定的无损检测方法，应在产品图样、技术文件和订货技术条件中注明检测方法、部位、深度范围及质量等级等。

Heavy mechanicai general techniques and standards.Part 14: Non-destructive inspection of cast steel

JB/T 5000.15-2007 重型机械通用技术条件.第15部分:锻钢件无损检测

JB/T 5000的本部分规定了锻钢件的超声波、磁粉和渗透检测方法及其质量等级。 本部分适用于重型机械用锻钢件的无损检测。 采用本部分规定的无损检测方法，可能会涉及危害性材料、操作及设备，参加无损检测人员应遵守有关安全防护和保健规程。 对锻件无损检测的方法、部位及质量等级应在锻件图样、技术文件和订货技术条件中注明。

Heavy mechanicai general techniques and standards.Part 15: Non-destructive inspection of forged steel