H90 冶金机械设备综合 标准查询与下载

JB/T 5000.14-2007 重型机械通用技术条件.第14部分:铸钢件无损检测

JB/T 5000的本部分规定了铸钢件的超声波检测、射线检测、磁粉检测和渗透检测及其相应的质量等级。 本部分适用于重型机械用铸钢件。其中，超声波检测适用于厚度不小于3Omm的碳钢和低合金钢铸件：不适用于奥氏体铸钢件。射线检测适用于厚度5mm～300mm的铸钢件。磁粉检测适用于铁素体铸钢件表面及近表面缺陷的检验。渗透检测适用于铸钢件表面开口性缺陷的检验。 凡采用本部分规定的无损检测方法，应在产品图样、技术文件和订货技术条件中注明检测方法、部位、深度范围及质量等级等。

Heavy mechanicai general techniques and standards.Part 14: Non-destructive inspection of cast steel

JB/T 5000.15-2007 重型机械通用技术条件.第15部分:锻钢件无损检测

JB/T 5000的本部分规定了锻钢件的超声波、磁粉和渗透检测方法及其质量等级。 本部分适用于重型机械用锻钢件的无损检测。 采用本部分规定的无损检测方法，可能会涉及危害性材料、操作及设备，参加无损检测人员应遵守有关安全防护和保健规程。 对锻件无损检测的方法、部位及质量等级应在锻件图样、技术文件和订货技术条件中注明。

Heavy mechanicai general techniques and standards.Part 15: Non-destructive inspection of forged steel

DIN EN 14681:2007 机械安全.使用电弧炉制造钢用机械和设备的安全要求

This European Standard specifies the general safety requirements for electric arc furnaces (EAF) to melt steel not containing radioactive material. This European Standard deals with all significant hazards, hazardous situations and events pertinent to EAF, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse. This European Standard specifies also criteria for the plant and equipment integrated in the production process. This European Standard specifies the requirements to ensure the safety of persons which are to be met during the design, assembly, transport, commissioning, operation, maintenance and decommissioning of the equipment. This European Standard assumes that installations are operated and maintained by adequately trained and competent personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use of the equipment. This European Standard covers the following equipment (see Annex B): - EAF with AC technology (alternating current); - EAF with DC technology (direct current); - scrap pre-heating technology; - associated equipment/devices according Annex B. The following equipment is not covered by this European Standard: - induction furnace; - resistance-arc furnace; - electron beam furnace; - plasma furnace; - other electrical furnaces used in secondary steelmaking. This European Standard does not specify safety requirements for the following equipment, which can be an integral or complementary part of the equipment covered by the Scope: a) cranes; b) scrap basket; c) transport car for scrap basket; d) elephant house (furnace encasing for environmental reasons); e) separate scrap drying equipment.

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces; German version EN 14681:2006

YB/T 4072-2007 高炉热风阀

本标准规定了高炉热风阀的术语和型号、规格及参数、技术要求、检验与试验、检验规则、标志及包装、贮存和运输、安装与使用等要求。 本标准适用于系统工作压力不大于0.6MPa、工作温度不大于1450℃、公称直径DN500~DN2200的高炉热风阀。

Blast furnace hot blast valve

YB/T 4073-2007 高炉用铸铁冷却壁

本标准规定了高炉用铸铁冷却壁(灰铸铁、球墨铸铁冷却壁)的技术要求、试验方法、检验规则、质量证明书、标志、包装及运输。 本标准适用于各种容积的炼铁高炉用铸铁冷却壁。如有特殊要求,可在图样或专用技术文件中另行规定。

Cast iron staves for blast furnace

YB/T 4156-2007 干熄焦旋转排出阀

本标准规定了干熄焦旋转排出阀的技术要求、试验方法、检测规则、标志、包装及运输、贮存等内容。 本标准主要适用于干熄焦旋转排出阀。

Dry quenched coke rotry discharge valve

YB/T 4157-2007 高温连杆式切断蝶阀

本标准规定了高温连杆式切断蝶阀的术语和结构型式、技术要求、试验方法、检测规则、标志及包装、贮存和运输等要求。 本标准适用于公称通径DN600~DN3200、公称压力不大于PN10、适用温度不高于600℃,介质为空气、烟气、煤气等的法兰连接的高温连杆式切断蝶阀。

High temperature lever shut-off butterfly valve

YB/T 4158-2007 铁水包倾翻车

本标准规定了铁水包倾翻车的术语、技术要求、试验方法、检测规则、标志、包装、运输及贮存等要求。 本标准适用于90t~450t铁水预处理中脱硫扒渣工艺的铁水包倾翻车。

Hot-metal ladle tilting car

YB/T 4145-2006 碳硫分析专用坩埚

Special crucible for carbon and sulfur analysis

YS/T 616-2006 陶瓷过滤机

本标准规定了陶瓷过滤机的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于有色、冶金、环保、化工及其他非金属领域进行固液分离的陶瓷过滤机。

Ceramic-medium filter

YB/T 4056-2006 金属板材矫正机工作辊技术条件

本标准规定了辊式金属板材矫正机工作辊的技术要求、试验方法与验收规则、标记、包装、运输和贮存等。 本标准适用于辊式金属板材矫正机工作辊用的整体锻造合金钢工作辊（以下简称工作辊），也适用于技术要求相同的金属板材矫正机用整体锻造合金钢中的间辊。

Technical specifications of work roll for plate straightener

YB/T 4054-2006 无缝钢管常用穿孔顶头技术条件

本标准规定了无缝钢管常用穿孔顶头的技术要求、检验规则与试验方法、标志、包装、运输、贮存等。 本标准适用于穿制碳素钢、低合金钢无缝钢管的铸造、锻造穿孔顶头的制造。

Technical specifications of common piercing-plug for seamless steel tube

YB/T 4070.2-2006 金属剪切刀片技术条件.圆盘剪机刀片

本部分规定了金属剪切刀片 圆盘剪机刀片的技术要求、试验方法与检验规则、标志、包装和贮运等。 本部分主要适用于整体式圆盘剪机圆型刀片的制造和验收，其他刀片亦可参照使用。

Technical specifications of blade for metal shearing. Circular shear blade

YB/T 4070.1-2006 金属剪切刀片技术条件.剪板机和剪断机刀片

本部分规定了金属剪切刀片 剪板机和剪断机刀片的技术要求、试验方法与检验规则、标志、包装和贮运等。 本部分主要适用于整体式剪板机和剪断机刀片的制造和验收，其他刀片亦可参照使用。

Technical specifications of blade for metal shearing. blades for plate shearing machine and clipping machine

KS B ISO 11994:2002 起重机.可用性.词汇

이 규격은 상호 이해와 계약을 좀더 쉽게 하고, KS B ISO 4306-1에 정의된 모든

Cranes－Availability－Vocabulary

JB/T 2628-1999 轧钢车间加热炉齿条式推钢机.基本参数

本标准规定了轧钢车间加热炉用齿条式推钢机的基本参数。 本标准适用于轧钢车间加热炉用齿条式推钢机，其用途是将钢坯（锭）连续推入、推出（当加热炉侧出料时它要和出钢机联合作用）加热炉。

The basic data for rack pusher of furnace in rolling mill

YB/T 5012-1997 高炉及热风炉用砖形状尺寸

Shapes and dimensions of bricks for blast furnaces and hot-blast stove

ANSI/ASTM F1348/F 1348M:1997 气动旋转除锈机规范

This specification covers requirements for pneumatic rotary descaling machines for removal of paint, rust, scale, nonskid deck covering, and other coatings from steel and aluminum structures. These portable machines are intended for use in a marine environment, subject to salt air and spray during use and high humidity during storage. The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The following precautionary statement pertains to the test method portion only, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 17.2.1.

Specification for Pneumatic Rotary Descaling Machines

JB/T 1444-1995 冶金设备用气缸型式与尺寸

本标准规定了冶金设备用气缸结构尺寸与型式分类。 本标准适用于最高工作压力为0.63MPa，周围介质温度为5～60℃，气缸活塞工作速度为50～500mm/s的双动式气缸。

Cylinder type and size for metallurgical equipment

YB/T 4070.1-1992 金属剪切刀片技术条件 剪板机和剪断机刀片

Specifications for Metal Shearing Blades Shears and Shearing Machine Blades