J01 技术管理 标准查询与下载

JB/T 50170-1999 白刚玉冶炼电炉能耗分等（内部使用）

JB/T 50170-1999 本标准是对 ZB J01 020-88《白刚玉冶炼电炉 能耗分等》的修订。 本标准规定了容量为 360~2500kVA 的白刚玉磨料冶炼电炉能耗等级。其他容量白刚玉磨料冶炼电炉可参照执行。 白刚玉冶炼电炉按其炉座单耗可分为一等、二等、三等。炉座单耗达不到三等指标的属于等外。 本标准于 1988 年 3 月 5 日首次发布。

White alundum smelting electric heaters. Grading of energy consumption (only for internal use)

JB/T 50171-1999 陶瓷磨具烧成窑能耗分等（内部使用）

JB/T 50171-1999 本标准是对 ZB J01 021-88《陶瓷磨具烧成窑 能耗分等》的修订。 本标准规定了陶瓷砂轮和陶瓷油石等产品烧成的隧道窑、倒焰窑和普通台车式（抽屉）窑能耗等级。 陶瓷磨具烧成窑按其炉座可比单耗分为一等、二等、三等。炉座可比单耗达不到三等指标的属于等外。 本标准于 1988 年 3 月 5 日首次发布。

Ceramics grinding tool burning furnace. Grading of energy consumption (only for internal use)

JB/T 50172-1999 树脂磨具硬化炉能耗分等（内部使用）

JB/T 50172-1999 本标准是对 ZB J01 022-88《树脂磨具硬化炉 能耗分等》的修订。 本标准规定了用电或发生炉煤气为能源的间歇式树脂磨具硬化炉能耗等级。 树脂硬化炉按其炉座可比单耗分为一等、二等、三等。炉座可比单耗达不到三等指标的属于等外。 本标准于 1988 年 3 月 5 日首次发布。

Resin grinding tool hardening furnace. Grading of energy consumption (only for internal use)

JB/T 50173-1999 火花塞窑炉能耗分等（内部使用）

JB/T 50173-1999 本标准是对 ZB J01 023-88《火花塞窑炉 能耗分等》的修订。 本标准规定了火花塞窑炉能耗等级。 本标准适用于各种内燃机点火系统用火花塞（不含航空火花塞和特殊用途火花塞）绝缘体制造工序中的排腊、素烧和釉煤气窑炉。 各种炉窑按每座在统计期内出窑合格制品的平均能耗分为一等、二等和三等。达不到三等的属于等外。 本标准于 1988 年 3 月 5 日首次发布。

Spark plug furnace. Grading of energy consumption (only for internal use)

JB/T 50174-1999 电镀工序能耗分等（内部使用）

JB/T 50174-1999 本标准是对 ZB J01 024-88《电镀工序 能耗分等》的修订。 本标准规定了电镀工序能耗等级。 本标准适用于电镀工厂、车间或工段。 电镀工序按每平方米合格产品镀层的综合能耗分为一等、二等、三等。综合能耗达不到三等指标的属于等外。 本标准于 1988 年 11 月 13 日首次发布。

Electroplating process. Grading of energy consumption (only for internal use)

AIA/NAS NAM51417-1999 联邦科学委员会 5306公制细牙全螺纹十六进制头机械螺栓

NOMINAL LENGTH EQUALS BASIC THICKNESS OF PLATE FOR INSERT ASSEMBLY.

Bolt, Machine, Hex Head, Fully Threaded, Fine Thread, Metric

DIN V 19259-2:1999 装置的文件.阀门的相关分类的标准数据元类型

Documentation of devices - Standard data element types with associated classification for valves

AIA/NAS NAM14290-1999 联邦科学委员会 5340公制直角的加衬垫的回形夹

NOMINAL LENGTH E a u u BASIC THICKNESS OF PUTE FOR INSERT ASSEMBLY. 2. ASSEMBLED LENGTH OF INSERT TO BE AS SPECIFEO ON MS33537. *3. NUMBER OF FREE COILS TO BE COUNTED ANO ASSEMBLED LENGTH OF INSERT TO BE MEASUREO 9U FROM TANG. 4. MATERUL: STEEL, CORROSION RESISTANT. AMs 7245 (MATERIAL ANO MFG.). 5. SURFACE TEXTURE: ANSI 846.1-1952. 6. INSERT, WHEN ASSEMBLED IN TAPPE0 HOLE AS SPECIFIED IN MS33537. SHKL PRODUCE A FINISHED THD MEETING ALL REOUIREMENTS OF MIL-S-7742 AND SHALL ACCEPT D(TERNAL MIL-S-8879 THREADS.

Clamp, Loop, Cushioned, Rectangular, Metric

ISO 15226:1999 技术产品文件 生命周期模型和文件分配

This International Standard gives a method of establishing a flexible life cycle model and gives guidance on efficient and easy-to-understand handling technical documents during the product life cycle. The product life cycle takes different company-specific requirements into account, in accordance with project management techniques. For general use in connection with non-company-specific requirements, procedures, processes and products, it may be necessary to establish a standardized life-cycle model with defined phases. This International Standard is intended for use in companies, bodies of authority and other organizations who deal with manufactured products, with the compilation and use of technical documents during the product life cycle. It is not applicable either to services or software. This International Standard is intended to be an aid in controlling and coordinating documents, in accordance with ISO 9001, ISO 9002, and ISO 9003.

Technical product documentation - Life cycle model and allocation of documents

NF E04-505-0:1998 技术产品文献.文字写法.第0部分:一般要求

Technical product documentation. Lettering. Part 0 : general requirements.

IPC TA-724-1998 技术评估系列洁净室

The continuing trend to finer features on PCBs increased the negative effect of particles on board yields. Cleanrooms provide a logical way to reduce the effect of particles, and are more critical as finer lines are required. Cleanrooms have been used since at least the 1970s to make printed circuits, but some boards are still made today without them.

Technology Assessment Series on Cleanrooms

IEC TR 61346-4:1998 工业系统,安装,设备,工业产品.结构规则和参考说明.第4部分:概念论述

Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 4: Discussion of concepts

IPC TM-650 2.1-1998 修改J的视觉测试方法

IPC Standards and Publications are designed to serve the public interest through

Visual Test Methods Revision J

ASTM E678-98 技术数据的评定

1.1 This practice covers the evaluation of technical data, appropriate criteria for such evaluation, and other relevant considerations which constitute a proper basis for the formation of technical opinions in product liability matters. This practice deals with hypotheses and opinions based on consideration and analysis of technical data. While the facts and issues of each situation require specific consideration and may involve matters not expressly dealt with herein, the approach outlined is recommended as good professional practice. 1.2 For additional standards promulgated by ASTM Committee E-30.40 on Technical Aspects of Products Liability Litigation, see Practices E620, E860, and E1020.

Standard Practice for Evaluation of Technical Data

AIA/NAS NAM14289-1998 联邦科学委员会 5340上下两件成直角的加衬垫的固定绳索

HEAD MUST BE FREE FROM ALL FINS AND BURRS.

Strap, Retaining, Cushioned, Rectangular, Two-Piece, Metric

AIA/NAS NAM1312-105-1997 联邦科学委员会 53一般用途压力耐久力105方法公制钮扣测试

NAM13 12-105, “Fastener Test Methods Method 105 Stress Durability” was adopted on 29 August 1997 for use by the Department of Defense @OD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center Aircraft Division, Code 4141OOB120-3 Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard fi-om the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. The private sector and other Government agencies may purchase copies fi-om the Aerospace Industries Association, 1250 Eye Street NW, Washington, DC 20005.

Fastener Test Methods Metric; Method 105, Stress Durability

AIA/NAS NAM1312-107-1997 联邦科学委员会 53一般用途振动107方法公制钮扣测试

-71401 THRU NAsM171900, "PIN - SPRlNG, CORROSION RESISTANT STEEL", was adopted on 4 NOVEMBER 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Supply Center Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of ' this standard f r o m the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES 3924. ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WACHINGTON, DC 20005-

Fastener Test Methods, Metric; Method 107 Vibration

AIA/NAS NAM1312-108-1997 联邦科学委员会 53一般用途抗张强度108方法公制钮扣测试

This method covers a procedure for testing all types of structural fasteners in tension at room temperature. This procedure is intended to define the test required to determine the tensile strength of the fastener itself, not the strength of the fastener in any sheet combination.

Fastener Test Methods, Metric; Method 108 Tensile Strength

AIA/NAS NAM1312-109-1997 联邦科学委员会 53一般用途胁强腐蚀109方法公制钮扣测试

NASM.20392, "PIN, STRAIGHT, HEADED, DRILLESDH ANK", was adopted on 21J UNE 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Actlvrties must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Phlladelphla, PA 19111- 5096. DoD Activlties may obtain copioefs this standard from the Standardizatlon Document OrderD esk, 700 Robbins Avenue, Buildlng4 D, * Phlladelphla, PA 19111-5094'. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924.

Fastener Test Methods, Metric; Method 109 Stress Corrosion

AIA/NAS NAM1312-111-1997 联邦科学委员会 53一般用途张力疲劳111方法公制钮扣测试

This test method establishes the procedure and equipment to be used for tension-fatigue testing of bolts, screws and nuts at room temperature.

Fastener Test Methods, Metric; Method 111 Tension Fatigue