J01 技术管理 标准查询与下载

KS B ISO 12781-1:2012 产品几何技术规范(GPS).平面度.第1部分:平面图术语及参数

이 표준은 개별적으로 완전한 형체의 평면도에 관련된 용어 및 개념만을 정의한다.

Geometrical product specifications(GPS)-Flatness-Part 1:Vocabulary and parameters of flatness

SB/T 10675-2012 二手挖掘机流通技术要求

本标准规定了二手挖掘机的品质要求、品质分级、鉴定估计过程与交易要求和品质鉴定报告要求。 本标准适用于二手挖掘机的流通。轮式挖掘机的流通可参照使用。

Technical specification for circulation of used excavator

SB/T 10677-2012 二手流动式起重机流通技术要求

本标准规定了二手流动式起重机的品质要求、品质分级、鉴定评估与交易要求和品质鉴定报告要求。 本标准适用于二手汽车起重机和二手履带起重机的流通。二手轮胎起重机和二手随车起重机等可参照使用。

Technical specification for circulation of used mobile crane

SB/T 10676-2012 二手混凝土泵车流通技术要求

本标准规定了二手混凝土泵车的品质要求、品质分级、鉴定评估、鉴定估价与交易要求和品质鉴定报告要求。 本标准适用于二手混凝土泵车的流通，二手车载式混凝土泵可参照使用。

Technical specification for circulation of used truck-mounted concrete pump

SB/T 10674-2012 二手装载机流通技术要求

本标准规定了二手装载机的品质要求、品质分级、鉴定评估工程与交易要求和品质鉴定报告要求。 本标准适用于二手轮式装载机的流通。

Technical specification for circulation of used loader

KS B ISO 12780-2:2012 产品几何技术规范(GPS).平直度.第2部分:规范操作

이 표준은 단지 형체의 진직도에 대한 완전 명세 연산자만을 규정하며, 완전 진직도 단면 곡

Geometrical product specifications(GPS)-Straightness-Part 2:Specification operators

ASME Y14.41-2012 数字化产品定义数据实施规程

This Standard establishes requirements and references documents applicable to the preparation and revision of digital product definition data, hereafter referred to as data sets. This Standard defines exceptions and additional requirements to existing ASME standards for using product definition digital data sets or drawing graphic sheet in digital format, hereafter referred to as drawing graphic sheet. When no exception or additional requirements are stated, existing ASME standards shall apply.

Digital Product Definition Data Practices

BS ISO 29845:2011 技术产品文件.文件类型

Technical product documentation. Document types

DB37/T 1879-2011 承压系统泄漏声发射检测规程

Acoustic emission detection code for leaks in pressurized systems

DIN 32869-1:2011 技术产品文件.三维CAD-模型.第1部分:表示要求

Technical product documentation - Three-dimensional CAD-models - Part 1: Requirements for representation

DB31/T 522-2011 通风机及其系统节能改造技术规范

Technical specifications for energy-saving retrofit of fans and their systems

ASTM F2915-11 添加制造文件格式(AMF)的标准规范

1.1 This specification describes a framework for an interchange format to address the current and future needs of additive manufacturing technology. For the last three decades, the STL file format has been the industry standard for transferring information between design programs and additive manufacturing equipment. An STL file contains information only about a surface mesh and has no provisions for representing color, texture, material, substructure, and other properties of the fabricated target object. As additive manufacturing technology is quickly evolving from producing primarily single-material, homogenous shapes to producing multimaterial geometries in full color with functionally graded materials and microstructures. There is a growing need for a standard interchange file format that can support these features. 1.2 The additive manufacturing file (AMF) may be prepared, displayed, and transmitted on paper or electronically, provided the information required by this specification is included. When prepared in a structured electronic format, strict adherence to an extensible markup language (XML)(1) schema is required to support standards-compliant interoperability. The adjunct to this specification contains a W3C XML schema and Annex A1 contains an implementation guide for such representation. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This standard also does not purport to address any copyright and intellectual property concerns, if any, associated with its use. It is the responsibility of the user of this standard to meet any intellectual property regulations on the use of information encoded in this file format.

Standard Specification for Additive Manufacturing File Format (AMF)

SAE J1754/3-2010 软管总成，液压，J517 100R 系列软管第 3 部分：采购和订购信息

This SAE Standard covers procurement and ordering information for hose assemblies using SAE Standard J 517 100R Series hoses and connectors specified in SAE Standard J 516 or all parts of ISO 12151 for use in hydraulic systems using petroleum based hydraulic fluids.

Hose Assemblies, Hydraulic, J517 100R Series Hose Part 3: Procurement and Ordering Information

DIN 32869-1:2010 技术产品文件.三维CAD模型.第1部分:表示要求

The document establishes rules for the representation of three dimensional CAD-models for the use in mechanical engineering.

Technical product documentation - Three-dimensional CAD-models - Part 1: Requirements for representation

ASME BOK-2010 工程管理知识体系 (BOK) 指南

Guide to the Engineering Management Body of Knowledge (BOK)

DB31/ 414-2008 冷却塔能效限定值、能源效率等级及节能评价值

The minimum allowable values of energy efficiency、energy efficiency grades and evaluating values of energy conservation for cooling tower

BS ISO 7573:2008 技术产品文件.部件清单

Technical product documentation - Parts lists

ANSI/AIAA S-102.2.2-2008 性能基系统可靠性建模要求

This Standard establishes uniform requirements and criteria for performance-based System Reliability Modeling, including planning, performing, documenting, and evaluating. Although it is a common industry practice for reliability modeling to be performed using computerized tools, this Standard does not mandate that any particular computerized methodology be used.

Performance-Based System Reliability Modeling Requirements

AWS A5.30/A5.30M-2007 自耗嵌块规范.第3版

This specification prescribes requirements for the classification of bare aluminum and aluminum-alloy welding electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes.

Specification for Consumable Inserts 3rd Edition

ISO 16792:2006 技术产品文件.数字产品定义数据通则

This International Standard specifies requirements for the preparation, revision and presentation of digital product definition data, hereafter referred to as data sets. It supports two methods of application: model-only, and model and drawing in digital format. Its structure presents requirements common to both methods followed by clauses providing for any essential, differing requirements for each method. Additionally, its use in conjunction with computer aided design (CAD) systems could assist in the progression towards improved modelling and annotation practices for CAD and engineering disciplines, as well as serving as a guideline for IT engineers. The aspects specified in this International Standard refer mainly, but not exclusively, to requirements that differ or are additional to those provided in existing, related standards. Where no such requirements are identified, it is safe to assume that the appropriate existing ISO standards are instead applicable.

Technical product documentation - Digital product definition data practices