共找到 1868 条与 液压与气动装置 相关的标准,共 125 页
本标准规定了以液压油(液)或压缩空气为工作介质的液压缸、气缸活塞杆螺纹的常用系列,以及为活塞杆螺纹装配拧紧所设置的扳手面、扳手孔尺寸。本标准适用于液压缸、气缸活塞杆的外部连接螺纹。
Fluid power systems and components—Cylinder piston rod thread types and dimensions
本标准规定了最高工作压力1 MPa、缸径为8 mm 至25 mm 单杆气缸的安装尺寸,以满足产品互换性的要求。 注:本标准仅提供基本的指导方针,允许制造商自行设计气缸,不限制技术开发。
Pneumatic fluid power—Single rod cylinders,bores from 8 mm to 25 mm—Mounting dimensions
本标准规定了液压缸和气缸(以下简称缸)的安装尺寸和安装型式的标识代号,包括:缸的安装尺寸、外形尺寸、附件尺寸和连接口尺寸,以及安装型式和附件型式的标识代号。本标准未包括所有液压缸和气缸的安装型式和附件型式。
Fluid power systems and components—Identification code for cylinders mounting dimensions and mounting types
GB/T3452 的本部分规定了液压气动用O形橡胶密封圈的抗挤压环(挡环)的术语和定义、类型、符号、结构型式、安装位置、材料、尺寸和公差及标识。本部分适用于GB/T3452.1 中规定的O形圈的抗挤压环、GB/T3452.3—2005 中规定的沟槽用活塞和活塞杆动密封O形圈的抗挤压环,以及径向静密封O形圈的抗挤压环(以下简称挡环)。
O-rings for fluid power systems—Part 4:Anti-extrusion rings (back-up rings)
GB/T9065 的本部分规定了材质为碳钢的法兰式软管接头(典型示例见图1,适用于符合ISO6162 1 和ISO6162 2 的油口和法兰夹)设计和性能的基本要求和尺寸要求。
Connections for hydraulic fluid power—Hose fittings—Part 3: Flange ends
GB/T9065 的本部分规定了材质为碳钢的螺柱端软管接头(典型示例见图1,符合GB/T2878.2或
Connections for hydraulic fluid power—Hose fittings—Part 4: Stud ends
GB/T9065 的本部分规定了材质为碳钢的60 °锥形的软管接头(典型示例见图1)设计和性能的基本要求和尺寸要求。本部分适用于公称内径为5 mm~51 mm 的软管(符合GB/T2351 的公称软管内径)。 注:若选用其他材质,由供需双方协商。 说明:1 ———软管接头;2 ———O形密封圈;
Connections for hydraulic fluid power—Hose fittings—Part 6: 60° cone ends
GB/T14513的本部分规定了一种使用简单数值计算的方法,在不经过测量的情况下,利用构成系统的元件和管道的流量特性,来估算整个系统的流量特性。 本部分所使用的公式都是用来描述压缩空气在亚声速流和壅塞流状态下通过元件的流量特性。 注:管子、消音器和过滤器的流导受进口压力影响,其C值和b值仅在确定的进口压力下有效。 本部分也适用于GB/T14513未规定的元件等效流量特性的计算。
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems
GB/T38206的本部分规定了评估换向阀可靠性的试验设备、试验条件、试验程序、可靠性阈值和试验结果的处理方法。 本部分适用于换向阀无维修条件下的首次失效,但一些异常值除外。 注:首次失效出现异常值时的处理方法参见GB/T38206.1—2019中附录A的内容。
Methods to assess the reliability of pneumatic components—Part 2: Directional control valve
本标准规定了由有色金属管制成的气缸缸筒的机械性能、尺寸公差、表面粗糙度和技术要求。本标准适用于经消除拉伸应力或进行充分热处理、内孔经特殊有屑或无屑精加工的圆形无缝或焊接有色金属缸筒,也适用于内孔是圆形的异形缸筒。 注:本标准主要针对黄铜合金和铝合金材料,但不限于此类材料。
Pneumatic fluid power—Rules of non-ferrous metallic cylinder body
Hydraulic fluid power—Mounting dimensions for single rod cylinders,16MPa series—Part 3:Compact series with bores from 250mm to 500mm
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 2: Alternative test methods
Hydraulic fluid power—Mounting dimensions for single rod cylinders,10 MPa series—Part 2: Short-stroke series
Hydraulic fluid power—Filter elements—Sequence of tests for verifying performance characteristics
Hydraulic fluid power—Filter elements—Determination of resistance to flow fatigue using high viscosity fluid
Methods to assess the reliability of pneumatic components—Part 1:General procedures
Hydraulic fluid power—Filter elements—Part 4: Method for rated end load test
Methods to assess the reliability of pneumatic components—Part 3:Cylinders with piston rod
Hydraulic fluid power—Dimensions and tolerances of polyurethane seals—Part 4:Dimensions and tolerances of seals for cylinder port
Hydraulic fluid power—Dimensions and tolerances of polyurethane seals—Part 3:Dimensions and tolerances of wiper ring
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号