共找到 4123 条与 焊接与切割 相关的标准,共 275 页
本标准规定了无铅钎料产品的型号、技术要求、试验方法、检验规则、以及包装、标志、质量证明。 本标准适用于电气电子设备、通讯设备等引线及部件连接时使用的无铅钎料。
Lead-free solders
本标准规定了不锈钢药芯焊丝及填充丝的型号、技术要求,试验方法、复验和供货技术条件等内容。 本标准适用于熔化极气体保护和自保护电弧焊用不锈钢药芯焊丝及钨极惰性气体保护焊用不锈钢药共填充丝(以下简称“焊丝”)。
Tubular cored electrodes for stainless steels
Tubular cored electrodes for creep-resisting steels
本标准规定了金属材料激光和电子束窄焊缝横截面的维氏和努氏硬度试验。 本标准规定的维氏硬度试验力范围通常为0.098 N~≤98 N(HV 0.01~≤HV 10),努氏硬度试验力范围通常为不大于9.8 N(HK 1)。 本标准适用于采用或不采用填充丝的焊缝试样的硬度试验。 本标准不适用于采用激光/电弧复合宽焊缝试样的硬度试验。 非窄焊缝的硬度试验按GB/T 2654和GB/T 27552执行。
Destructive tests on welds in metallic materials.Vickers and Knoop Hardness testing of joints welded by laser and electron beam
本标准规定了埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合的分类、技术要求、试验方法、复验和供货技术条件等内容。 本标准适用于埋弧焊用非合金钢及细晶粒钢实心焊丝分类,以及最小抗拉强度要求值不大于570 MPa的焊丝-焊剂组合的分类要求。
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels
本标准规定了埋弧焊和电渣焊用焊剂的型号、分类代号、技术要求、试验方法、复验和供货技术条件等内容。 本标准适用于埋弧焊和电渣焊用焊剂。 2
Fluxes for submerged arc welding and electroslag welding
Solid wire electrodes /flux combinations for submerged arc welding of stainless steels
本标准规定了埋弧焊用高强钢实心焊丝、药芯焊丝和焊丝-焊剂组合的分类、技术要求、试验方法、复验和供货技术条件等内容。 本标准适用于埋弧焊用高强钢实心焊丝分类,以及最小抗拉强度要求值不小于590 MPa的焊丝-焊剂组合的分类要求。
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of high strength steels
Non-destructive testing of welds—General rules for metallic materials
GB/T34630 的本部分规定了铝及铝合金搅拌摩擦焊接接头的设计要求。 本部分适用于铝及铝合金搅拌摩氛焊。
Friction stir welding—Aluminium and its alloys—Part 2:Design of weld joints
Friction stir welding—Aluminium and its alloys—Part 4:Specification and qualification of welding procedures
GB/T34630 的本部分规定了铝及铝合金搅拌摩擦焊接质量与检验要求。 本部分适用于铝及馈合金搅拌摩擦焊接。
Friction stir welding—Aluminium and its alloys—Part 5:Quality and inspection requirements
Friction stir welding—Aluminium and its alloys—Part 1:Terminology and definition
Welding procedure qualification test for laser-arc hybrid welding of steels, nickel and nickel alloys
本标准规定了硬钎焊接头缺欠的分类和说明。 本标准适用于硬钎焊接头中的各类钎焊缺欠的识别。
Imperfections in brazed joints
本标准规定了钢、镍及镍合金的激光-电弧复合焊接焊接的接头缺欠质量等级。 本标准适用于厚度为0.5 mm及以上的钢、镍及镍合金材料。
Laser-arc hybrid welding joints of steels, nickel and nickel alloys—Quality levels for imperfections
本标准规定了锰基钎料的分类和型号、化学成分、技术条件、试验方法和检验规则、包装、标志、产品质量证明书。 本标准适用于气体保护的炉中钎焊、感应钎焊等方法使用的钎料。
Manganese base brazing filler metal
本标准界定了软钎焊、硬钎焊工序相关的术语和定义。 本标准适用于软钎焊、硬钎焊技术研究、开发与应用,及相关的管理、经营、标准制定等。
Soldering and brazing terms
GB/T 19867的本部分规定了激光-电弧复合焊接的工艺规程内容要求。 本部分适用于激光-电弧复合焊接方法。
Welding procedure specification for laser-arc hybrid welding
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号