J59 特种加工机床 标准查询与下载

JB/T 5543-1991 数控低速走丝电火花线切割机.精度

本标准规定了数控低速电火花线切割机精度。 本标准适用于加工一般模具及零件、结构为工作台移动式、线状工具电极作单向运行的低速走丝电火花切割机。

Numerically controlled low speed wire electrical discharge machine (WEDM) Precision

JB/T 5544-1991 数控低速走丝电火花线切割机 技术条件

Specifications for NC low-speed WEDM

GOST 4.130-1988 机械加工自动线.联合机床和联合式特种机床.指标项目

Стандарт устанавливает номенклатуру основных показателей качества автоматических линий механической обработки сблокированных и несбло

Product quality index system. Transfer machining lines, unit type and special unit type machine tools. Nomenclature of indices

DIN 58760:1987 光学工程生产.用内配合件的镜片块夹具

Production in optical engineering; lens block holders with inside fitting

DIN 58761:1987 光学工程的生产.带外装配件的透镜片夹具

This standard contains lens block holders with outside fitting to be used in production in optical engineering predominantly for manufacturing of optical lenses.

Production in optical engineering; lens block holders with outside fitting

DIN 58725:1987 光学工程的生产.具配合零件的螺纹连接

The standard specifies screwed connections with fitting part used in production in optical engineering.

Production in optical engineering; screwed connection with fitting part

DIN 58727-2:1986 光学工程生产.第2部分:镶嵌球形硬质合金尖的平面加工销

The standard specifies dimensions and materials for surfacing pins with spherical cemented metal carbide point used in the production of optical engineering.

Produktion in optical engineering: surfacing pins with spherical cemented metal carbide point

DIN 58727-3:1986 光学工程生产.第3部分:镶嵌圆柱形硬质合金尖的平面加工销

The standard specifies dimensions and materials for surfacing pins with cylindrical cemented metal carbide point used in the production of optical engineering.

Production in optical engineering; surfacing pins with cylindrical cemented carbide point

JIS B 6361:1985 电火花雕模机和数控电火花雕模机性能和准确度的试验方法

Test code for performance and accuracy of electrical discharge machines and numerically controlled electrical discharge machines

DIN 58747-4:1982 光学技术加工.超声波清洗机.清洗架把手

Production in optical engineering; ultrasonic cleaning machines; handle for racks

Production in optical engineering; ultrasonic cleaning machines; handle for racks

DIN 58747-1:1982 光学技术加工.超声波清洗机.清洗槽的面积

Production in optical engineering; ultrasonic cleaning machines; areas for cleaning tanks

Production in optical engineering; ultrasonic cleaning machines; areas for cleaning tanks

DIN 58747-2:1982 光学技术加工.超声波清洗机.架、固定形式

Production in optical engineering; ultrasonic cleaning machines; racks, fixed form

Production in optical engineering; ultrasonic cleaning machines; racks, fixed form

DIN 58726:1977 光学加工.无连接配件的螺纹连接件

Production in optical engineering; screwed connections without fitting part

Production in optical engineering; screwed connections without fitting part

DIN 58727-1:1973 第1部分:不镶硬质金属的球形尖光学处理仪用平面销

Surfacing pins for optics processing machines; without ball point of cemented metal carbide

Surfacing pins for optics processing machines, without ball point cemented metal carbide

UNI 5954-1970 通过自然偏差的测定．对一生产程序中的车床进行检验

Ha per oggetto le modalita' da seguire per effettuare il rilievo della tolleranza naturale di una macchina utensile inserita in un processo produttivo e per decidere se questa e' idonea ad eseguire, nella tolleranza prescritta, gli elementi da produrre. Il fornitore, se convenuto nel capitolato, deve fornire assieme alla macchina una copia dei rilievi (esposti per esempio nella forma illustrata in appendice) come certificato di qualita'. Vale anche per mezzi produttivi non strettamente classificabili come macchine utensili (per esempio forni, impianti per rivestimenti galvanici, ecc.), purche' sia possibile ed economico eseguire nelle stesse condizioni nominali una serie di elementi. Preparazione della prova. Elaborazione dei dati. Valori orientativi del coefficiente gamma.

Control of machine tools included in an operating cycle by determination of process capability.

SJ/T 31014-1994 刻线机完好要求和检查评定方法

本标准规定了普通刻线机的完好要求和检查、评定方法。 本标准适用普通长度刻线机和圆刻线机。

Requirements of readiness and methods of inspection and assessment for ruling machines

SJ/T 31015-1994 电火花加工机床完好要求和检查评定方法

本标准规定了普通电火花成型机床和电火花线切割机床的完好要求和检查、评定方法。 本标准适用于各种机型的普通电火花成型机床和电火花线切割机床。

Requirements of readiness and methods of inspection and assessment for electro-discharge machines

SJ/T 31028-1994 数控电火花线成形机完好要求和检查评定方法

本标准规定了M65K型数控电火花成型机的完好要求和检查、评定方法。 本标准适用于M65K型数控电火花成型机，其它类型(规格)的数控电火花成型机亦可参照执行。

Requirements of readiness and methods of inspection and assessment for NC electro-discharge wire shaping machines

SJ/T 31029-1994 数控电火花线切割机完好要求和检查评定方法

本标准规定了DK 7725C型数控电火花线切割机床的完好标准和检查、评定方法。 本标准适用于DK 7725C型数控电火花线切割机床，其它类型(规格)的数控电火花线切割机床亦可参照执行。

Requirements of readiness and methods of inspection and assessment for NC electro-discharge wire cutting machines