J59 特种加工机床 标准查询与下载

JB/T 10330.2-2004 高速电火花小孔加工机.第2部分:参数

JB/T 10330的本部分规定了高速电火花小孔加工机的参数。 　　本部分适用于新设计的高速电火花小孔加工机。

High speed electro-discharge small hole drilling machines Part 2:Parameters

JB/T 10329.3-2002 电溶爆外圆加工机床.第3部分:精度检验

本部分参照GB/T 17421.1-1998和GB/T 17421.2-2000规定了一般用途电熔爆外圆加工机床的几何精度检验、数控轴定位精度检验和加工检验；本部分还规定了与上述检验对应的允差值。 　　本部分适用于最大工件直径200mm～1600mm的电熔焊外圆加工机床。 　　本部分仅涉及机床精度的检验，而不适于机床运行试验(振动、异常噪声、零部件的爬行等)或其参数(如速度、量等)的检查，这些检查通常应在精度检验前进行。 　　本部分还规定了用于机床主要部件的术语并命名了坐标轴。

External cylindrical electrical melting and explosion machines -Part 3:Testing of accuracy

JB/T 10329.2-2002 电溶爆外圆加工机床.第2部分:参数

本部分规定了电熔爆外圆加工机床的参数。 　　本部适用于新设计的电熔爆外圆加工机床。

External cylindrical electrical melting and explosion machines -Part 2:Parameters

JB/T 10329.1-2002 电溶爆外圆加工机床.第1部分:系列型谱

本部分规定了电熔爆外圆加工机床的系列构成、用途、性能特征、品种。 　　本部分适用于新设计的电熔爆外圆加工机床。

External cylindrical electrical melting and explosion machines -Part 1:Series and spectra of type

JB/T 10329.4-2002 电溶爆外圆加工机床.第4部分:技术条件

本部分规定了电熔爆外圆加工机床制造和验收的技术要求。 　　本部分适用于最大工件直径200mm～1600mm的一般用途的电熔爆外圆加工机床。

External cylindrical electrical melting and explosion machines -Part 4:Techenical requirements

JB/T 10330.1-2002 高速电火花小孔加工机.第1部分:技术条件

本部分规定了高速电火花小孔加工机的安全防护、加工和装配质量、空运转试验、负荷试验、精度检验、标志与使用说明书、包装、运输的技术要求。 　　本部分适用于一般用途、常规精度的高速电火花小孔加工机。

High speed small hole drilling electro-discharge machines -Part 1:Techenical requirements

DIN 58739-1:2002 光学加工.光学加工工件夹具.第1部分:真空夹头

The document applies to workpiece receptions which are used in the optic manufacturing for rubbing, polishing of single lenses and lenses which are putted on trays.#,,#

Production in optical engineering - Workpiece receptions for optics - Part 1: Vacuum chucks

DIN 58739-4:2002 光学加工.光学加工工件夹具.第4部分:支承体夹头

Production in optical engineering - Workpiece receptions for optics - Part 4: Collets for spot blocks

DIN 58739-3:2002 光学加工.光学加工工件夹具.第3部分:单镜头夹头

The document applies to workpiece receptions which are used in the optic manufacturing for rubbing, polishing of single lenses.#,,#

Production in optical engineering - Workpiece receptions for optics - Part 3: Collets for single lenses

DIN 58739-2:2002 光学加工.光学加工工件夹具.第2部分:带隔膜夹头

Production in optical engineering - Workpiece receptions for optics - Part 2: Chucks with membranes

SN/T 0997-2001 出口特种加工机床.电火花线切割机检验规程

Export non-traditional machine tools.Rules for the inspection of wire electro-discharge machines

BS IEC TR 62157:2001 圆柱形机加工碳电极.标称尺寸

This technical report applies to cylindrical carbon electrodes, manufactured from upgraded coal, for use in electric direct-arc and submerged-arc furnaces, for melting silicium and carbide and for other purposes. This technical report covers - dimensions and tolerances on the length and diameter of carbon electrodes; - dimensions and thread details for carbon electrode heads and sockets.

Cylindrical machined carbon electrodes - Nominal dimensions

DIN 58722-2:2001 光学加工.与光学加工有关的术语.第2部分:设备

The document applies to terms and definitions, which are used in the production in optical engineering. Purpose is an unique terminology for production in optical engineering in order to improve the communication within this domain.#,,#

Production in optical engineering - Terms relating to production in optical engineering - Part 2: Equipment

BS EN 12957:2001+A1:2009 机床.安全性.放电加工机床

1.1 This standard specifies technical safety requirements and measures, applicable to EDM equipment and EDM system (e.g. for spark erosion-sinking, spark erosion-wire cutting), to be adopted by persons undertaking the design, construction, installation and/or supply of such equipment. This standard also includes information to be provided by the manufacturer to the user. 1.2 The design requirements of this standard shall not apply to arc eroding and electro chemical machining equipment. 1.3 This standard takes account of the intended use in normal workshop environment and non explosive atmospheres including installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment. 1.4 This standard also applies to auxiliary devices essential for EDM processing. 1.5 This standard deals with specific hazards defined in clause 4, Table 1, and the measures of prevention in clause 5, Table 2. 1.6 This standard applies to machines built after its date of issue. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

Machine tools - Safety - Electro discharge machines

BS EN ISO 28881:2013 机床.安全性.电火花加工机床

Machine tools. Safety. Electro-discharge machines

BS EN 12957:2001 机床.安全性.放电加工机床

1 This standard specifies technical safety requirements and measures, applicable to EDM equipment and EDM system (e.g. for spark erosion-sinking, spark erosion-wire cutting), to be adopted by persons undertaking the design, construction, installation and/or supply of such equipment. This standard also includes information to be provided by the manufacturer to the user. 2 The design requirements of this standard shall not apply to arc eroding and electro chemical machining equipment. 3 This standard takes account of the intended use in normal workshop environment and non-explosive atmospheres including installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment. 4 This standard also applies to auxiliary devices essential for EDM processing. 5 This standard deals with specific hazards defined in clause 4, Table 1, and the measures of prevention in clause 5, Table 2. 6 This standard applies to machines built after its date of issue. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

Machine tools - Safety - Electro discharge machines

DIN ISO 11090-2:2001 机床.放电刻模机床的试验条件(EDM).术语和精度试验.第2部分:双柱式机床(滑动头型和横向滑动工作台型) (ISO 11090-2:1998)

The document specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM).

Machine tools - Test conditions for die sinking electro-discharge machines (EDM); Terminology and testing of accuracy - Part 2: Two column machines (slide head type and cross slide table type) (ISO 11090-2:1998)

DIN ISO 11090-1:2001 机床.放电刻模机床的试验条件.术语和精度试验.第1部分:单柱式机床(横向滑动型工作台和固定型工作台) (ISO 11090-1:1998)

The document specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM).

Machine tools - Test conditions for die sinking electro-discharge machines (EDM); Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type) (ISO 11090-1:1998)

DIN 58736-2:2001 光学加工.定心罩.第2部分:内部连接尺寸30mm和46mm带有圆柱形配件的定心罩

The document applies to centering bells with fitting dimension 33 mm and 46 mm which are used in production for optical engineering. Purpose of these requirements are standardised dimensions for centering bells with cylindrical fittings to enable exchangeability.

Production in optical engineering - Centering bells - Part 2: With cylindrical fitting dimension 30 mm and 46 mm for inner connection

DIN 58736-3:2001 光学加工.定心罩.第3部分:外连接用圆柱形接头.尺寸12mm和25mm

The document applies to centering bells with fitting dimension 12 mm which are used in production for optical engineering. Purpose of these requirements are standardised dimensions for centering bells with cylindrical fittings 12 mm and 25 mm to enable exchangeability.

Production in optical engineering - Centering bells - Part 3: With cylindrical fitting dimension 12 mm and 25 mm for outer connection