J87 印刷机械 标准查询与下载
共找到 362 条与 印刷机械 相关的标准，共 25 页
This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti??ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery; German version EN 1010-2:2006+A1:2010
- ICS
- 37.100.10;85.100
- CCS
- J87
- 发布
- 2011-05
- 实施
- 2011-05-01
Graphic technology. Safety requirements for graphic technology equipment and systems. Binding and finishing equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2011-02-28
- 实施
- 2011-02-28
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1 : common requirements.
- ICS
- 37.100.10;85.100
- CCS
- J87
- 发布
- 2011-02-01
- 实施
Graphic technology. Safety requirements for graphic technology equipment and systems. Prepress and press equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2011-01-31
- 实施
- 2011-01-31
Provides safety requirements specific to binding and finishing equipment and systems. This standard is intended to be used in conjunction with the general requirements given in B65-1. It provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process and to a wide range of equipment used in the binding and finishing process.
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2011
- 实施
Provides additional press design safety requirements for the design and construction of new manually fed or automatic stand-alone platen press systems intended for diecutting, creasing, embossing, foil stamping and/or printing of paper, board and other materials processed in a similar manner.
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Stand-alone platen presses
- ICS
- 25.120.10
- CCS
- J87
- 发布
- 2011
- 实施
本标准规定了磨刀机的型式、型号、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于刃磨金属直刃刀片的磨刀机。
Printing machinery.Knife grinder
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了热熔胶订包封皮机的型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于手工续书芯热熔胶订包封皮机（以下简称胶订机)。
Printing machinery.Hot melt adhesive book covering machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了丝网涂布机的术语、定义、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于丝网印刷中制版涂布感光胶的丝网涂布机。
Printing machinery.Screen stencil coating machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了绷网机的术语、定义、型式、基本参数、型号与名称、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于丝网印刷中制版绷网的绷网机。
Printing machinery.Screen stretcher
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
JB/T 9115的本部分规定了平压平烫印机卧式机（以下简称烫印机）的术语和定义、型式、基本参 数、型号和名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于平压平烫印机的卧式机，也适用于卧式乎压平烫印模切两用机及卧式平压平烫印印刷两用机的烫印部分。
Printing machinery.Platen foil stamping machine.Part 1:Bed-type machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
JB/T 9115的本部分规定了平压平烫印机的立式机（以下简称立式机）型式、基本参数、型号和名称、要求、试验方法、检验规则和标志、包装、运输和贮存。 本部分适用于平压平烫印机的立式机，也适用于立式平压平烫印模切两用机的烫印部分。
Printing machinery.Platen foil stamping machine.Part 1:Standing-type machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了玻璃印刷机的术语和定义、组成与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于承印物为平板玻璃的带传输送料型的玻璃印刷机。
Printing machinery.Glass screen printer
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了辊式粘单页机的基本参数、型号与名称、要求、试验方法、检验规则、标志、包装、贮存和运输。 本标准适用于辊式粘单页机（以下简称粘页机）。
Printing machinery.Rolling tipping machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了各种印刷机润版循环水箱(以下简称润版水箱）的术语和定义、型式、型号与基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于各种用于印刷机的润版循环设备。
Printing machinery.Damping water circulating system
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了热敏型直接制版冲版机的术语和定义、基本参数、型号和名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于铝版基预制感光热敏型直接制版冲版机（以下简称冲版机）。
Printing machinery.Thermal CTP plate processor
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了光敏光聚合型直接制版冲版机的术语和定义、基本参数、型号和名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于铝版基预制感光光敏光聚合型直接制版卧式冲版机。
Printing machinery.Photopolymer CTP plate processor
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了单张纸平版印刷机收纸装置(以下简称收纸装置）的术语和定义、型号与基本参数、要求、试验方法、检验规则及标志、包装、运输与贮存。 本标准适用于纸张规格符合GB/T 15467-1995规定的代号为P51～P142的单张纸平版印刷机（涉及GB/T 3264、JB/T 10204）中的收纸装置。
Printing machinery.Sheet-fed offset press.Delivery device
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了局部上光机(以下简称上光机）的术语和定义、型式、型号与基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于单张纸紫外线固化和红外线干燥的局部涂布上光机。
Printing machinery.Part coating machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了网版印刷紫外线光固机的术语和定义、组成与基本参数、型号与名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于网版印刷中对感光性涂料或油墨固化的紫外线光固机。
Printing machinery.Screen printing UV light curing machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
