J94 燃油供给系统 标准查询与下载
共找到 494 条与 燃油供给系统 相关的标准，共 33 页
Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs
- ICS
- 43.060.40
- CCS
- J94
- 发布
- 2015-08
- 实施
Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs
- ICS
- 43.060.40
- CCS
- J94
- 发布
- 2015-07-31
- 实施
- 2015-07-31
UL Standard for Safety General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I@ Division 2 or Zone 2@ Hazardous (Classified) Locations (First Edition)
- ICS
- CCS
- J94
- 发布
- 2014-08-29
- 实施
JB/T 6731的本部分规定了通用小型汽油机用化油器(以下简称化油器)的名称和型号编制规则。本部分适用于非道路移动机械用通用小型汽油机化油器的型号编制,其他类小型汽油机(如舷外机等)用化油器(电控和电喷除外)也可参照执行。
Carburetor for general utility small gasoline engines.Part 2: Nomenclature and code of designations
- ICS
- 27.020
- CCS
- J94
- 发布
- 2014-07-09
- 实施
- 2014-11-01
JB/T 6731的本部分规定了通用小型汽油机用化油器(以下简称化油器)技术要求、试验方法、检验规则及标志、包装、运输与贮存、产品交付与服务的要求。本部分适用于通用小型汽油机用化油器。
Carburetor for general utility small gasoline engines.Part 1: Technical specification
- ICS
- 27.020
- CCS
- J94
- 发布
- 2014-07-09
- 实施
- 2014-11-01
This part of ISO 4548 specifies a method of testing the structural integrity of full-flow lubricating oil filters to withstand engine vibrations. This test is intended for application to spin-on type filters and detachable filters with disposable elements with a maximum flow rate of 100 L/min. Upon agreement between manufacturer and purchaser, this test method can be applied to filters with higher flow rates. This test method is intended for test parts made from composite materials that experience mechanical property changes within the temperature range experienced in service. The test can be applied to filters with other temperature sensitive materials if thought applicable by agreement between the filter manufacturer and the purchaser.
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 15: Vibration fatigue test for composite filter housings
- ICS
- 27.020
- CCS
- J94
- 发布
- 2014-07
- 实施
本标准规定了柴油机液压调速器(以下简称调速器)的技术要求、试验方法和检验规则。本标准适用于以独立部件形式出现、具有液压放大机构和离心飞块式转速敏感元件的调速器。
Diesel engines.Hydraulic speed governors.Specifications
- ICS
- 27.020
- CCS
- J94
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 13: static burst pressure test for composite filters housings
- ICS
- 27.020
- CCS
- J94
- 发布
- 2013-12-13
- 实施
- 2013-12-13
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: vibration fatigue test
- ICS
- 17.160;27.020
- CCS
- J94
- 发布
- 2013-06-01
- 实施
- 2013-06-01
本标准规定了柴油机燃油系统用标准喷油泵的型式和主要参数、技术要求和试验方法。本标准适用于校核柴油机燃油系统用喷油泵试验台用标准喷油器总成的标准喷油泵。
Calibrating fuel injection pump.Specifications
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了柴油机电动式输油泵的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于柴油机用电动式输油泵(以下简称输油泵)。
Electrical lift pump on diesel engine.Specifications
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了柴油机燃料喷射系统喷油泵用各种类型滚轮式挺柱部件结构、技术条件、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于柴油机燃料喷射系统喷油泵用各种类型滚轮式挺柱部件(以下简称挺柱部件)。
Roller tappet assemblies of diesel fuel injection pump.Specifications
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了柴油机分列式喷油泵总成可靠性考核评定方法、台架试验方法、故障分类及判定规则。本标准适用于柴油机分列式喷油泵总成可靠性测定和考核评定。
Fuel injection pump reliability test.Assessment methods, bench test methods, failure type classification and judgment rules
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了柴油机合成式喷油泵总成可靠性考核评定方法、台架试验方法、故障分类及判定规则。本标准适用于柴油机合成式喷油泵总成可靠性测定和考核评定。
Integral drive pump reliability test.Assessment methods, bench test methods, failure type classification and judgment rules
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了柴油机电控分配泵总成的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于柴油机用电控分配泵总成(以下简称电控分配泵)。
Electronic-controlled distributor fuel injection pump of diesel engine.Specifications
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了中小功率柴油机喷油器总成可靠性指标、可靠性测定或考核方法、评定方法、试验方法和故障判定。本标准适用于中小功率柴油机喷油器总成可靠性测定和考核评定。
Nozzle assemblies reliability test.Assessment methods, test methods, failure type classification and judgment rules
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了磁粉探伤对零件表面的要求、探伤设备、磁粉、磁悬液、磁化方法、探伤方法、磁化规范、探伤灵敏度校验和退磁。本标准适用于铁磁性材料制造的柴油机喷油嘴偶件、喷油泵柱塞偶件、喷油泵出油阀偶件的磁粉探伤。
Injection nozzle, plunger and delivery valve.Magnaflux method for the inspection
- ICS
- 27.020;43.060.40
- CCS
- J94
- 发布
- 2013-04-25
- 实施
- 2013-09-01
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: static burst pressure test
- ICS
- 27.020
- CCS
- J94
- 发布
- 2013-02-02
- 实施
- 2013-02-02
Methods of test for full-flow lubricating oil filters for internal combustion engines. Vibration fatigue test
- ICS
- 17.160;27.020
- CCS
- J94
- 发布
- 2012-11-30
- 实施
- 2012-11-30
Methods of test for full-flow lubricating oil filters for internal combustion engines. Static burst pressure test
- ICS
- 27.020
- CCS
- J94
- 发布
- 2012-10-31
- 实施
- 2012-10-31
