共找到 494 条与 燃油供给系统 相关的标准,共 33 页
本规则适用于各类燃油(气)锅炉用燃烧器,其他用途用燃烧可参照本规则执行。
Safety Technical Regulation for Oil and Gas Burners
本标准规定了柴油机燃油喷射装置产品型号的编制方法。 本标准适用于柴油机燃油喷射装置。
The mode for designation of product models of fuel injection equipment for diesel engine
本标准规定了中小功率柴油机用闭式喷油器总成(以下简称喷油器)的技术要求、试验方法、检验规则、标志、包装、运输和贮存要求。 本标准适用于中小功率柴油机用喷油器。
Technical requirements of nozzle and holder assemblies of diesel engines
JB/T 5239 的本部分规定了柴油机柴油滤清器纸质滤芯的技术要求、检验规则和标志、包装、运输和贮存。 本部分适用于额定体积流量3.3L/min以下的柴油机柴油滤清器纸质滤芯(以下简称滤芯)。
Diesel engines.Diesel filters.Part 2: paper elements.Specincation
JB/T 5239的本部分规定了柴油机纸质滤芯柴油滤清器总成的技术要求、检验规则和标志、包装、运输及储存。 本部分适用于额定体积流量3.3L/min以下的柴油机纸质滤芯柴油滤清器总成(以下简称总成)。
Diesel engines.Diesel filters.Part 1:Paper element assembly.Specification
本标准规定了中小功率内燃机燃油箱的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于中小功率内燃机燃油箱(以下简称燃油箱)。
Small and medium power internal combustion engines.Fuel tanks.Specification
本规则适用于《燃油(气)燃烧器安全技术规则》中规定的燃烧器,其他用途的燃烧器的试验可以参照本规则进行。
Type Test Rule for Oil and Gas Burners
本部分规定了新造内燃机车辅助系统用斜轴式轴向定量柱塞液压泵/液压马达的术语和定义、产品型号、主要技术参数、技术要求、标志、包装、运输与贮存等要求。 本部分适用于内燃机车辅助系统用新造斜轴式轴向定量柱塞液压泵/液压马达。内燃动车组可参照执行。
Angle-axial type and constant displacement piston hydro-static pump/motor for diesel locomotive-Part 1:The Technical Specification
本部分规定了内燃机车用斜轴式轴向定量柱塞液压泵/液压马达试验方法。 本部分适用于内燃机车辅助系统用额定压力≤40MPa的新造斜轴式轴向定量柱塞液压泵/液压马达。内燃动车组可参照执行。
Angle-axial type and constant displacement piston hydro-static pump/motor for diesel locomotive-Part 2:The test methods
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1 : oil burner pumps.
This European Standard specifies the dimensions for connectors and certain dimensional characteristics of pumps for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps; English version of DIN EN 225-1:2007-12
This European Standard specifies the dimensions of motors for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 2: Oil burner motors; English version of DIN EN 225-2:2007-12
이 규격은 저압의 연료, 윤활유 또는 공기 공급의 연결을 위하여 디젤 연료 분사 펌프 및
Diesel engines-Fuel injection pumps and fuel injector low-pressure connections-Part 1:Threaded connections
이 규격은 디젤 기관에 부착되는 연료 분사 장치의 동적 세팅을 점검하기 위한 절차의 준비
Diesel engines-Procedure for checking the dynamic timing of diesel fuel injection equipment-Part 1:Preconditioning
이 규격은 디젤 연료 분사 펌프를 테스트 벤치상에서 시험 및 세팅하기 위해 사용하는 다음과
Diesel engines-Fuel injection pump testing-Calibrating fuel injectors
This European Standard specifies the dimensions of motors for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner motors
This European Standard specifies the dimensions for connectors and certain dimensional characteristics of pumps for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner pumps
이 규격은 다음 종류의 오일 버너(이하 버너라 한다.)의 성능 시험방법에 대하여 규정한다.
Methods of testing for oil burners
이 규격은 내연 기관의 가솔린 연료 순환에서 사용되는 고무 튜브 및 호스에 대한 요구 사항
Rubber hoses and tubing for fuel circuits for internal combustion engines-Specification-Part 2:Gasoline fuels
이 규격은 내연 기관의 디젤 연료 순환에 사용되는 고무 튜브 및 호스에 대한 요구 사항을
Rubber hoses and tubing for fuel cirecuits for internal combustion engines-Specification-Part 1:Diesel fuels
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号