K00 标准化、质量管理 标准查询与下载

IECEE 01-2014 IEC电工技术设备和部件相符性评价体系(IECEE).基本规则

IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Basic rules

DIN EN 62321-2:2014 电工技术产品中某些物质的测定. 第2部分: 拆卸, 拆分和机械样品制备 (IEC 62321-2-2013); 德文版本EN 62321-2-2014

Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation (IEC 62321-2:2013); German version EN 62321-2:2014

DL/T 1336-2014 电力通信站光伏电源系统技术要求

本标准规定了电力通信站光伏电源系统的总体技术要求，包括光伏电源系统主要设备技术要求、光伏电源系统的技术要求、光伏电源系统的安装技术要求、光伏电源系统的调试等内容。 本标准适用于新建、改建和扩建电力通信站光伏电源系统的工程设计与建设。

Technical requirement of PV power supply for electric power communication station

DIN EN 82079-1:2013 使用说明书的编制. 结构, 内容和呈现方法. 第1部分: 一般原则和详细要求(IEC 82079-1-2012); 德文版本EN 82079-1-2012

Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements (IEC 82079-1:2012); German version EN 82079-1:2012

NF C03-260-1*NF EN 82079-1:2012 使用说明书的准备.结构化、内容和陈述.第1部分:通则和详细要求

Preparation of instructions for use - Structuring, content and presentation - Part 1: general principles and detailed requirements

IECEE 02-2-2012 电工设备和元件(IECEE)用合格评定方案的IECEE体系.电工设备和元件(IECEE).IECEE会员

IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - IECEE Membership

IECEE 01-2012 IEC电工技术设备和部件相符性评价体系(IECEE).基本规则

IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) – Basic Rules (Edition 13.0)

IECEE 02-1-2012 电工设备和元件(IECEE)用合格评定计划的IEC体系.结构,构成和组织机构

IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Structure, consitution and organization

IECEE 02-3-2012 电工设备和元件(IECEE)用合格评定计划的IEC体系.同行评议程序

IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Peer Assessment Programme

IECEE 02-2012 电工设备和元件(IECEE)用合格评定方案的IECEE体系.程序规则.第I部分:电工设备和元件试验证书相互承认的IECEE方案(CB方案).第Ⅱ部分:电工设备和元件合格评定证书相互承认的IECEE方案(CB-FCS)

IECEE System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Rules for procedure - Part I: Scheme of the IECEE for mutual recognition of test certificates for electrotechnical equipment and components (CB Scheme) -

IECEE 01-2011 IEC电工技术设备和部件相符性评价体系基本规范(IECEE)

IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Basic rules

DIN EN 62502:2011 可信性分析技术.事件树分析(ETA) (IEC 62502-2010);德文版本EN 62502-2010

Analysis techniques for dependability - Event tree analysis (ETA) (IEC 62502:2010); German version EN 62502:2010

DIN EN 62508:2011 可信性人为因素方面的指南(IEC 62508-2010);德文版本EN 62508-2010

Guidance on human aspects of dependability (IEC 62508:2010); German version EN 62508:2010

IEC GUIDE 116:2010 指南.安全风险评估和风险减少指南.低压设备

This non-mandatory IEC Guide complements ISO/IEC Guide 51 and establishes guidelines useful for achieving safety in low voltage (LV) equipment. These guidelines include risk assessment, in which the knowledge and experience of the design, use, incidents, accidents and harm related to low voltage equipment are brought together in order to assess the risks during the relevant phases of the life of the equipment, as specified in Clause 6, and to implement the basics for risk reduction measures. This IEC guide should be used by technical committees as far as appropriate and to the extent they decide to apply it. This IEC Guide gives additional guidance to ISO/IEC Guide 50, 51 and 71 on the information required to allow risk assessment to be performed. Procedures are described for identifying hazards, estimating and evaluating risk (including comparison of risks) and risk reduction where necessary. Risks considered in this document include possible damages to persons, property, and livestock. It is not intended that the structure of this guide be adopted by technical committees. The purpose of this IEC Guide is to provide guidance for technical committees for decisions to be made on the safety of low voltage equipment and the type of documentation required to verify the risk assessment carried out. Components intended not to be used alone can only be assessed insofar as the manufacturer can predict the reasonably foreseeable use. The voltage range considered in this IEC Guide is up to 1000 V a.c. (1 500 V d.c.). Low voltage equipment generating internal voltages higher than 1 000 V a.c. (1 500 V d.c.) are covered, provided these voltages are not touchable (example: TV set with internal HV cascade). Product standards shall require that the equipment documentation include adequate information for the safe use of equipment. This guide does not cover components used within the electrical distribution system or within an electrical system or machines whose risk assessment depends to a very large extent on how they are used and incorporated in an electrical system or installation. This IEC Guide itself is not intended to be used for the purpose of certification. Product committees are encouraged to include a clause in product safety standards pertaining to risk assessment, to be used when the requirements of the standard do not fully encompass all possible hazards with equipment within the standard’s scope. This clause should incorporate the principles of this Guide.

Guidelines for safety related risk assessment and risk reduction for low voltage equipment (Edition 1.0; Includes Access to Additional Content)

IEEE NESC IR561-2010 解释文件第26节.强度要求

Interpretation Section 26. Strength requirements

Interpretation Section 26. Strength requirements

KS C 0924-2009 IT行业的环境术语及定义

이 표준은 IT1) 산업에서 일반적으로 사용되는 환경 용어에 대하여 규정한다. 용어 및 정

IT industry of environment-vocabulary

IECEE 01-2009 电工设备和部件(IECEE)一致性评估方案的IEC系统.基本规则

IEC System of conformity assessment schemes for electrotechnical equipment and components (IECEE) - Basic rules

IECEE 02-2009 电工设备和部件试验鉴定相互认可的国际电工委员会(IECEE)方案(CB 方案).程序规则

Scheme of the IECEE for mutual recognition of test certificates for electrotechnical equipment and components (CB scheme) - Rules for procudure

JEM TR 216-2009 用于JIS Q 9001质量管理体系的筹备指南

Guides to the preparation of quality management system for JIS Q 9001

IECEE 01-2008 电工设备和部件(IECEE)一致性评估方案的IEC系统.基本规则

IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) - Basic Rules