K00 标准化、质量管理 标准查询与下载

SN/T 0002-2004 进出口机电商品检验规程编写的基本规定

本标准规定了迸出口机电商品检验规程编写的基本要求、结构、格式、编写顺 序、内容、起草与表述方法“ 本标准适用于进出口机电商品检验规程的编写。

General stipulations for drafting of rules for inspection of import and export mechanical and electrical commodity

PD CLC/TR 50422:2003 欧洲标准EN 50160的应用指南

It is important to note that the scope of the standard is confined to the electricity supplied at the supply terminals, and does not deal with the supply system or the customer´s installation or equipment. The diagram below in Figure 1 illustrates the point which is defined in EN 50160 as the supply terminals and also the relationship between the impulse withstand requirements of the supply terminals, the customers installation and the customers electrical equipment. The appropriate categories of impulse voltage withstand for each zone are also highlighted. It should be stressed that the supply terminals, referred to in both the standard and this application guide,and the origin of the installation, referred to in both IEC 60664-1, Insulation coordination for equipment within low-voltage systems, and IEC 60364-4-44, Electrical Installations of buildings Part 4 Protection for Safety Chapter 44 Protection against overvoltages, are one and the same point. Figure 1 – Illustration of location of supply terminals As the standard is intended to deal only with the characteristics of the voltage at specified points on the public distribution networks, it does not deal directly with the characteristics of networks themselves, such as short circuit power. Clearly, however, the network characteristics will have an effect upon the magnitude of several of the phenomena described by the standard.The standard is applicable only under normal operating conditions of the supply system. This includes also the correct operation of protection devices in the case of a fault in the network;the operation of loads agreed between customer and distribution network operator and changes in network configuration.When energy is supplied to the public networks from small private generators, it is important to keep the level of disturbances within acceptable limits. In this context private generation is in the same position as any customers installation and therefore has to comply with the related emission standards and agreed limits for the voltage supplied. As such the voltage supplied from the generator must comply with the requirements of EN 50160.Table 1 – Non-exhaustive list of exceptional conditions and examples

Guide for the application of the European Standard EN 50160

KS C IEC PAS 62181:2003 IC锁定试验 

이 규격은 집적 회로의 I-test와 과전압 래치업 시험을 포함한다.

IC latch-up test

KS C IEC PAS 62164:2003 GaAs MMIC和FET寿命试验导则

수명 시험은 여러 가지 목적으로 실시한다. 단기 내구 기간에 발생하는 초기 사망률 수준

Guidelines for GaAs MMIC and FET life testing

IEEE 80/INT 1-2002 IEEE Std 80-2000用IEEE标准解释说明

IEEE Standards Interpretation for IEEE Std 80-2000

IEEE Standards Interpretation for IEEE Std 80-2000

IEEE 802.1D/INT 1-2002 IEEE Std 802.1D-1999、IEEE Std 802.1Q-1998和IEEE Std 802.3®-2000版本用IEEE标准解释文件

IEEE Standards Interpretation for IEEE Std 802.1D-1999, IEEE Std 802.1Q-1998 and IEEE Std 802.3®, 2000 Edition

IEEE Standards Interpretation for IEEE Std 802.1D-1999, IEEE Std 802.1Q-1998 and IEEE Std 802.3®, 2000 Edition

IEEE 802.1Q/INT 1-2002 IEEE Std 802.1D-1999、IEEE Std 802.1Q-1998和IEEE Std 802.3?-2000版本用IEEE标准解释文件

IEEE Standards Interpretation for IEEE Std 802.1D-1999, IEEE Std 802.1Q-1998 and IEEE Std 802.3?, 2000 Edition

IEEE Standards Interpretation for IEEE Std 802.1D-1999, IEEE Std 802.1Q-1998 and IEEE Std 802.3?, 2000 Edition

CSA C448 SERIE-02-CAN/CSA-2002 地面能源系统的设计和安装 第1版； 服务更新：2003 年 1 月； 更新 1 [已取代：CSA C445-M92-CAN/CSA、CSA C447-94]

Ce document constitue la première édition de la série de normes CSA C448, Conception et installation des systèmes d’énergie du sol. Il remplace les normes CAN/CSA-C445-M92, Conception et installation des systèmes à thermopompe sol-eau pour habitations e

Design and installation of Premiere Edition ground energy systems; Service Update: January 2003; Update No. 1 [Superseded: CSA C445-M92-CAN/CSA, CSA C447-94]

CSA C448 SERIES-02-CAN/CSA-2002 地下能量系统的设计和安装.第1版.第1次修订[被代替:CSA C445-M92-CAN/CSA,CSA C445-M92-CAN/CSA,CSA C447-94]

Design and Installation of Earth Energy Systems First Edition; Update No 1 [Superseded: CSA C445-M92-CAN/CSA, CSA C445-M92-CAN/CSA, CSA C447-94]

Design and Installation of Earth Energy Systems First Edition; Update 2: October 2009; Consolidated Reprint 10/2009 [Superseded: CSA C445-M92-CAN/CSA, CSA C445-M92-CAN/CSA, CSA C447-94]

IEEE 841/INT 1-2001 IEEE Std 841-1994的IEEE标准解释文件

IEEE Standards Interpretation for IEEE Std 841™-1994 IEEE Standard for the Petroleum and Chemical Industry-Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 500 hp

IEEE Standards Interpretation for IEEE Std 841-1994

IEEE 743/INT 1-2001 IEEE Std 743-1995用IEEE标准解释文件

IEEE Standards Interpretation for IEEE Std 743-1995

IEEE Standards Interpretation for IEEE Std 743-1995

IEEE 80/INT 1-2001 IEEE Std 80-1986用IEEE标准解释说明

IEEE Standards Interpretation for IEEE Std 80-1986

IEEE Standards Interpretation for IEEE Std 80-1986

BS EN 196403:2000 电子元器件质量评定协调体系.空白详细规范.按钮开关.评定等级 y

Harmonized systems of quality assessment for electronic components —Blank detail specification: Push button switches —Assessment level Y 1 Basic information 2 Ratings and characteristics (values according to 2.3 of EN 196000:1992) 3 Marking information 4 Ordering information 5 Related documents 6 Certified test records 7 Structural similarity 8 Delayed delivery 9 Additional information (Not for inspection purposes) 10 Additional or more severe requirements in relation to those contained in EN 196000:1992 and CECC 96 400:1988 11 Qualification and inspection requirements

Harmonized systems of quality assessment for electronic components - Blank detail specification: push button switches - Assessment level Y

CSA C282-00 JOURNAL-2000 建筑物应急供电:维护日志

This Standard applies to wet-process porcelain and toughened glass suspension-type insulators used on ac overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz.

Emergency Power Supply For Biuldings: Maintenance Journal

CSA DIR.011-1996-1996 确认的混凝土实验室清单

List of CSA Certified Concrete Testing Laboratories

Certified Concrete Laboratory List

CSA C22.2 No.184.1-96-1996 固态减光控制.第1版.通用指令第1号.第2次修订.第3次修订.UL 1472

Solid-State Dimming Controls First Edition; General Instruction No 1, Update No 2; Update No 3; UL 1472

Solid-State Dimming Controls First Edition; General Instruction No 1, Update No 2; Update No 3

CSA C22.2 No.1010.2.041-96-1996 测量、控制和实验室用电力设备的安全要求.第2-041部分:医疗材料处理和实验室操作用消毒高压灭菌器的特殊要求

Le contenu technique des puvlications de la CEI est tamment revu par la CEI afin qu'il reflete l'etat actuel de la technique.

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials, and for Laboratory Processes First Edition

CSA C22.2 No.1010.2.031-94-1994 测量、控制和实验室用电力设备的安全要求.第2-031部分:电气测量和试验用手持式探测器组合件的特殊要求.第1版.通用指令第1号

Le present amendement a ete etabli par le comite d'etudes 66 de la CEI: Securite desappareils de mesure,de commande et de laboratoire.

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-031: Particular Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test First Edition; General Instruction No 1

CSA C22.2 No.1010.2.020-94-1994 测量、控制和实验室用电力设备的安全要求-2-020部分:实验室离心机的特殊要求.第1版.更正1:1997.通用指令第1号

Safety Requirements for Electrical Equipment for Measurement, Control

Regles De Securite Pour Appareils Electriques De Mesurage, De Regulation Et De Laboratoire - Partie 2-020: Prescriptions Particulieres Pour Centrifugeuses De Laboratoire Premiere Edition; Modification 1: 1997; Fiche No 1

CSA C22.2 No.107.1-M91-1991 商业和工业用供电模块.勘误:通用指令第1号

Blocs D?Alimentation Commerciaux Et Industriels Fiche No 1

Blocs D碅limentation Commerciaux Et Industriels Fiche No 1