K21 同步电机 标准查询与下载
共找到 174 条与 同步电机 相关的标准，共 12 页
本标准规定了无直流励磁绕组同步电动机试验要求及试验方法。 本标准适用于永磁同步、磁滞同步及磁阻同步等无直流励磁绕组同步电动机的测试方法（不包括电磁减速永磁同步电动机）。
Test procedure for non-direct current excitation winding synchronous motor
- ICS
- 29.160.30
- CCS
- K21
- 发布
- 1992-12-19
- 实施
- 1993-06-01
Fundamental technical requirements for small hydraulic generators
- ICS
- CCS
- K21
- 发布
- 实施
本文件规定了快速动态响应同步调相机主要技术性能及其参数要求。 本文件适用于额定容量300MVA及以下快速动态响应同步调相机，其他容量等级可参照执行。
Technical specifications of fast dynamic response synchronous condenser
- ICS
- 29.160.99
- CCS
- K21
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件规定了水氢氢冷汽轮发电机附属系统检修的项目及要求。 本文件适用于水氢氢冷汽轮发电机附属系统检修。其他类型的汽轮发电机可参照执行。
Maintenance Guidelines for Hydrogen-cooled Turbine Generators Part 7: Maintenance of Auxiliary Systems
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件规定了同步发电机进相试验总体要求、试验条件、试验内容和试验方法等。 本文件适用于并网运行的同步发电机,同步调相机、抽水蓄能发电电动机可参照执行。
Synchronous Generator Phase Advance Test Guidelines
- ICS
- 29.16
- CCS
- K21
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件规定了水氢氢冷汽轮发电机励磁系统的检修项目及要求。 本文件适用于200MW等级及以上水氢氢冷汽轮发电机的励磁系统检修。其它同步电机可参照执行。
Maintenance Guidelines for Hydrogen-cooled Turbine Generators Part 6: Excitation System Maintenance
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2023-10-11
- 实施
- 2024-04-11
本文件规定了采用锤击法进行汽轮发电机定子绕组端部动态特性测量的方法及评定准则。 本文件适用于额定功率200MW及以上、额定转速为3000r/min及3600r/min的2极汽轮发电机和转速为1500r/min及1800r/min的4极汽轮发电机。 额定功率在200MW以下的汽轮发电机、以及额定容量在300MVA及以下的同步调相机可参照本文件执行。
Measurement and Evaluation of Dynamic Characteristics of Stator Winding Ends of Large Turbine Generators
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2023-10-11
- 实施
- 2024-04-11
Water-Hydrogen Hydrogen-cooled Turbine Generator Overhaul Guidelines Part 4: Hydrogen Cooling System Overhaul
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2021-12-22
- 实施
- 2022-03-22
Maintenance guideline for water-hydrogen hydrogen-cooled turbogenerators Part 5: Maintenance of internal cooling water system
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2021-12-22
- 实施
- 2022-03-22
Regulations for evaluation of wind turbine stator winding insulation structure resistance to moisture and heat
- ICS
- ICS 29.160.10
- CCS
- K21
- 发布
- 2020-10-23
- 实施
- 2021-02-01
Guidelines for actual measurement and modeling of synchronous generator prime mover and its regulating system parameters
- ICS
- 29.160.30
- CCS
- K21
- 发布
- 2019-06-04
- 实施
- 2019-10-01
Water-hydrogen-hydrogen-cooled turbogenerator inspection guideline Part 2: Stator inspection
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2019-06-04
- 实施
- 2019-10-01
Water Hydrogen Hydrogen Cooled Turbine Generator Overhaul Guidelines Part 3: Rotor Overhaul
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2019-06-04
- 实施
- 2019-10-01
Test procedure for on-site replacement and treatment of large generator stator windings
- ICS
- 29.160.20
- CCS
- K21
- 发布
- 2019-06-04
- 实施
- 2019-10-01
Technical conditions of large three-phase synchronous motors for mining mills
- ICS
- 29.160.30
- CCS
- K21
- 发布
- 2018-02-09
- 实施
- 2018-10-01
Technical conditions for rectangular silver-containing copper wires with unequal wall thickness in the air internally cooled generator rotor
- ICS
- 29.160.01
- CCS
- K21
- 发布
- 2018-02-09
- 实施
- 2018-10-01
Guidelines for thermal operation test of rotor of large air-cooled hidden pole synchronous generator
- ICS
- 29.160.10
- CCS
- K21
- 发布
- 2018-02-09
- 实施
- 2018-10-01
Micro vacuum cleaner for turbine generator brake
- ICS
- 29.160.01
- CCS
- K21
- 发布
- 2018-02-09
- 实施
- 2018-10-01
Technical conditions of hydrogen oil and water control system for large generators
- ICS
- 29.160.99
- CCS
- K21
- 发布
- 2018-02-09
- 实施
- 2018-10-01
Technical conditions of large three-phase four-pole synchronous motor
- ICS
- 29.160.30
- CCS
- K21
- 发布
- 2018-02-09
- 实施
- 2018-10-01
