K43 高压开关设备 标准查询与下载

NB/T 10179-2019 煤矿在用高压开关设备电气试验规范

Electrical test specifications for high-voltage switchgear in use in coal mines

DL/T 1946-2018 气体绝缘金属封闭开关设备X射线透视成像现场检测技术导则

Technical guidelines for X-ray fluoroscopy imaging on-site inspection of gas-insulated metal-enclosed switchgear

DL/T 978-2018 气体绝缘金属封闭输电线路技术条件

Specifications for gas-insulated metal-enclosed transmission lines

NB/T 10091-2018 高压开关设备温度在线监测装置技术规范

Technical specifications for online temperature monitoring devices for high-voltage switchgear

BS EN IEC 62271-102:2018 高压开关设备和控制设备. 交流切断器和接地开关

High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches

DIN EN IEC 62271-110:2018 高压开关设备和控制设备. 第110部分: 电感负载开关 (IEC 62271-110-2017+COR1-2017+COR2-2018); 德文版本 EN IEC 62271-110-2018+AC-2018

This part of IEC 62271 is applicable to AC switching devices designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1000 V and applied for inductive current switching. It is applicable to switching devices (including circuit-breakers in accordance with IEC 62271-100) that are used to switch high-voltage motor currents and shunt reactor currents and also to high-voltage contactors used to switch highvoltage motor currents as covered by IEC 62271-106. Switching unloaded transformers, i.e. breaking transformer magnetizing current, is not considered in this document.

High-voltage switchgear and controlgear - Part 110: Inductive load switching (IEC 62271-110:2017 + COR1:2017 + COR2:2018); German version EN IEC 62271-110:2018 + AC:2018

DIN EN 62271-1:2018 高压开关设备和控制设备.第1部分:交流开关设备和控制设备的一般规范(IEC 62271-1-2017); 德文版本EN 62271-1-2017

This part of IEC 62271 applies to a.c. switchgear and controlgear designed for indoor and outdoor installation and for operation at service frequencies up to and including 60 Hz on systems having voltages above 1000 V. This standard applies to all high-voltage switchgear and controlgear except as otherwise specified in the relevant IEC standards for the particular type of switchgear and controlgear.

High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear (IEC 62271-1:2017); German version EN 62271-1:2017

JB/T 8754-2018 高压开关设备和控制设备型号编制办法

Methods for compiling models of high-voltage switchgear and control equipment

DIN EN 62271-100:2018 高压开关装置和控制装置.第100部分:交流电流电路断路器(IEC 62271-100-2008+A1-2012+ A2-2017+A2-2017/COR1-2018).德文版本EN 62271-100-2009+A1-2012+A2-2017

This standard is applicable to a.c. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 kV.

High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers (IEC 62271-100:2008 + A1:2012 + A2:2017 + A2:2017/COR1:2018); German version EN 62271-100:2009 + A1:2012 + A2:2017

JIS C 4620:2018 组合式高压电力接收装置

Cubicle type high voltage power receiving units

JIS C 5381-22:2018 低压浪涌保护装置.第22部分:连接到远程通信和信号网络的浪涌保护装置.选择和应用原则

Low-voltage surge protective devices -- Part 22: Surge protective devices connected to telecommunications and signalling networks -- Selection and application principles

JIS C 4604 ERRATUM 1:2018 勘误

ERRATUM

DL/T 603-2017 气体绝缘金属封闭开关设备运行维护规程

Regulation of operation and preventive maintenance for gas-insulated metal-enclosed switchgear

DL/T 403-2017 高压交流真空断路器

High voltage AC vacuum circuit breaker

IEC 62271-101:2017 高压开关设备和控制设备.第101部分:综合性试验

This part of IEC 62271 mainly applies to a.c. circuit-breakers within the scope of IEC 62271- 100. It provides the general rules for testing a.c. circuit-breakers, for making and breaking capacities over the range of test duties described in 6.102 to 6.111 of IEC 62271-100:2008, by synthetic methods. It has been proven that synthetic testing is an economical and technically correct way to test high-voltage a.c. circuit-breakers according to the requirements of IEC 62271-100 and that it is equivalent to direct testing. The methods and techniques described are those in general use. The purpose of this standard is to establish criteria for synthetic testing and for the proper evaluation of results. Such criteria will establish the validity of the test method without imposing restraints on innovation of test circuitry.

High-voltage switchgear and controlgear - Part 101: Synthetic testing

JIS C 4604:2017 高压限流熔断器

High voltage current-limiting fuses

IEC 62271-110:2017 高压开关设备和控制设备.第110部分:电感负载开关

This part of IEC 62271 is applicable to AC switching devices designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1000 V and applied for inductive current switching. It is applicable to switching devices (including circuit-breakers in accordance with IEC 62271-100) that are used to switch high-voltage motor currents and shunt reactor currents and also to high-voltage contactors used to switch high-voltage motor currents as covered by IEC 62271-106. Switching unloaded transformers, i.e. breaking transformer magnetizing current, is not considered in this document. The reasons for this are as follows: a) Owing to the non-linearity of the transformer core, it is not possible to correctly model the switching of transformer magnetizing current using linear components in a test laboratory. Tests conducted using an available transformer, such as a test transformer, will only be valid for the transformer tested and cannot be representative for other transformers. b) As detailed in IEC TR 62271-306, the characteristics of this duty are usually less severe than any other inductive current switching duty. Such a duty may produce severe overvoltages within the transformer winding(s) depending on the re-ignition behaviour of the switching device and transformer winding resonance frequencies. NOTE 1 The switching of tertiary reactors from the high-voltage side of the transformer is not covered by this document. NOTE 2 The switching of shunt reactors earthed through neutral reactors is not covered by this document. However, the application of test results according to this document, on the switching of neutral reactor earthed reactors (4-leg reactor scheme), is discussed in IEC TR 62271-306.

High-voltage switchgear and controlgear - Part 110: Inductive load switching

NB/T 42107-2017 高压直流断路器

High voltage DC circuit breaker

IEC 62271-1:2017 高压开关设备和控制设备.第1部分:交流开关设备和控制设备的一般规范

This part of IEC 62271 applies to AC switchgear and controlgear designed for indoor and/or outdoor installation and for operation at service frequencies up to and including 60 Hz and having rated voltages above 1000 V. This document applies to all high-voltage switchgear and controlgear except as otherwise specified in the relevant IEC standards for the particular type of switchgear and controlgear. NOTE For the use of this document, high-voltage is defined as the rated voltage above 1000 V. However, the term medium voltage is commonly used for distribution systems with voltages above 1 kV and generally applied up to and including 52 kV.

High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear

IEC 62271-100:2017 高压开关装置和控制装置.第100部分:交流电流断路器

High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers