K43 高压开关设备 标准查询与下载

DIN EN 62271-102 Berichtigung 1:2016 高压开关装置和控制器.第102部分:交流断路器和接地(IEC 62271-102-2001+Cori genda 2002 & 2003+A1-2011);德文版本EN 62271-102-2002+Cor.-2008+A1-2011;DIN EN 62271-102 (VDE 0671-102)-2012-06的勘误;(IEC-Cor.-2014 to IEC 62271-102-2001)

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches (IEC 62271-102:2001 + Cori genda 2002 & 2003 + A1:2011); German version EN 62271-102:2002 + Cor.:2008 + A1:2011, Corrigendum to DIN EN 62271-102 (V

DIN EN 62271-200 Berichtigung 1:2016 高压开关设备和控制设备.第200部分:额定电压大于1 kV小于等于52 kV的交流金属封闭式开关设备和控制设备(IEC 62271-200-2011).德文版本EN 62271-200-2012;DIN EN 62271-200 (VDE 0671-200)-2012-08的勘误;(IEC-Cor.-2015 to IEC 62271-200-2011)

High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200:2011); German version EN 62271-200:2012, Corrigendum to DIN EN 62271-200 (VDE 0671-

BS IEC/IEEE 62271-37-013:2015 高压开关设备和控制设备. 交流发电机断路器

High-voltage switchgear and controlgear. Alternating-current generator circuit-breakers

DIN EN 62271-104:2015 高压开关设备和控制设备. 第104部分:52 kV以上的额定电压用交流开关（IEC 62271-104: 2015）; 德文版本EN 62271-104: 2015

High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV (IEC 62271-104:2015); German version EN 62271-104:2015

IEC/IEEE 62271-37-013:2015 高压开关设备和控制设备. 第37-013部分: 交流发电机断路器

This part of IEC 62271 is applicable to three-phase a.c. high-voltage generator circuit-breakers, hereafter called generator circuit-breaker, designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 kV and up to 38 kV. It is applicable to generator circuit-breakers that are installed between the generator and the transformer terminals. Requirements relative to generator circuit-breakers intended for use with generators and transformers rated 10 MVA or more are covered specifically. Generator circuits rated less than 10 MVA and pumped storage installations are considered special applications, and their requirements are not completely covered by this standard. This standard is also applicable to the operating mechanisms of generator circuit-breakers and to their auxiliary equipment.

High-voltage switchgear and controlgear - Part 37-013: Alternating-current generator circuit-breakers

IEEE Std C37.20.2-2015 金属包覆开关设备

Metal-Clad Switchgear

BS EN 62271-3:2015 高压开关设备和控制设备 基于 IEC 61850 的数字接口

High-voltage switchgear and controlgear. Digital interfaces based on IEC 61850

DIN EN 60282-1:2015 高压熔断器.第1部分:限流熔断器(IEC 60282-1-2009+A1-2014);德文版本EN 60282-1-2009+A1-2014

High-voltage fuses - Part 1: Current-limiting fuses (IEC 60282-1:2009 + A1:2014); German version EN 60282-1:2009 + A1:2014

BS EN 62271-104:2015 高压开关设备和控制设备.额定电压52 kV及以上的交流开关

High-voltage switchgear and controlgear. Alternating current switches for rated voltages higher than 52 kV

IEC 62271-3:2015 高压开关设备和控制设备.第3部分:基于IEC 61850的数字界面

This part of IEC 62271 is applicable to high-voltage switchgear and controlgear for all rated voltage levels above 1 kV and assemblies thereof and specifies equipment for digital communication with other parts of the power utility automation and its impact on testing. This equipment for digital communication@ replacing metal parallel wiring@ can be integrated into the high-voltage switchgear@ controlgear@ and assemblies thereof@ or can be external equipment in order to provide compliance for existing switchgear and controlgear and assemblies thereof with the standards of the IEC 61850 series. This International Standard is a product standard based on the IEC 61850 series.It deals with all relevant aspects of switchgear and controlgear@ and assemblies thereof with a serial communication interface according to the IEC 61850 series. In particular it defines: a) a selection of the information models from the IEC 61850 series that are supported by such switchgear and controlgear@ and assemblies thereof; b) conformance classes for the set of communication services that are supported by the switchgear and controlgear@ and assemblies thereof; c) modifications and extensions to type and routine tests of switchgear and controlgear@ and assemblies thereof that are required due to the serial communication interface. The standard specifies the requirements for digital communication equipment used within high-voltage switchgear@ controlgear@ and assemblies thereof@ as well as the relevant testing requirements. The relevant switchgear standards of the IEC 62271 series are applicable in general@ with the additional specifications described in this standard. NOTE 1 This standard intends to promote interoperability of communication interfaces. Interchangeability is outside the scope of this standard@ as there is no requirement for it. Interchangeability is also outside the scope of the IEC 61850 series. NOTE 2 For an introduction to power utility automation communication and the related terms@ definitions and models@ refer to IEC 61850-1 which provides an overview of the objectives and requirements of the IEC 61850 series in general. IEC 61850-7-1 provides an overview of modelling techniques.

High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850

DIN EN 62271-202:2015 高压开关设备和控制器.第202部分:高压/低压预制式变电站(IEC 62271-202-2014);德文版本EN 62271-202-2014

High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation (IEC 62271-202:2014); German version EN 62271-202:2014

IEEE Std C37.11-2014 AC高压(>1000 V)断路器的电气控制要求

Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers

DIN EN 62271-211:2014 高压开关设备和控制设备. 第211部分: 额定电压大于52 kV的电力变压器和气体绝缘金属封闭式开关设备的直接连接 (IEC 62271-211-2014); 德文版本EN 62271-211-2014

High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV (IEC 62271-211:2014); German version EN 62271-211:2014

DIN VDE 0670-402:2014 电压大于1 kV的交流开关设备和控制装置. 变压器电路中限流熔断器的选择应用指南

A.C. switchgear and controlgear for voltages above 1 kV - Application guide for the selection of current-limiting fuse-links for transformer circuits

NB/T 42044-2014 3.6kV~40.5kV智能交流金属封闭开关设备和控制设备

本标准规定了3.6kV~40.5kV智能交流金属封闭开关设备和控制设备的正常和特殊使用条件、术语和定义、额定值、设计与结构、型式试验、出厂试验等方面的要求。 本标准适用于3.6kV~40.5kV智能交流金属封闭开关设备和控制设备，智能交流金属封闭开关设备和控制设备除满足GB 3906-2006外，还应满足本标准要求。

Alternating-current metal-enclosed intelligent switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV

IEC 60282-1:2009/AMD1:2014 高压熔断器. 第1部分: 限流熔断器

High-voltage fuses - Part 1: Current-limiting fuses

IEC 60282-1:2014 高压熔断器. 第1部分: 限流熔断器

High-voltage fuses - Part 1: Current-limiting fuses

BS EN 62271-211:2014 高压开关设备和控制设备. 额定电压大于52 kV的电力变压器和气体绝缘金属封闭式开关设备的直接连接

High-voltage switchgear and controlgear. Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV

BS EN 62271-202:2014 高压开关设备和控制器.高压/低压预制式变电站

High-voltage switchgear and controlgear. High-voltage/low-voltage prefabricated substation

KS C 3117-2014 铝布线钳子及附着连接器

이 표준은 가공 Al 배전선의 내장, 인류개소에서 사용하는 볼트 조임형 인장 클램프(이하 클램프라 한다.) 및 가공 알루미늄선에 장력이 걸리지 않는 장소에서 알루미늄선 상호 간 또는 알루미늄선과 동선을 볼트로 접속하는 부착형 커넥터(이하 커넥터라 한다.)에 대하여 규정한다.?

Deadend clamp and bolt type connector for aluminum