K56 燃气轮机及其辅助设备 标准查询与下载

JB/T 8953.2-1999 燃气－蒸汽联合循环设备采购.汽轮机

本标准规定了采购燃气-蒸汽联合循环设备的发电用汽轮机基本要求。 本标准适用于燃气-蒸汽联合循环设备的发电用汽轮机。

Steam turbine procurement for combined-cycle plants

JB/T 8953.1-1999 燃气－蒸汽联合循环设备采购.基本信息

本标准用于采购由燃气轮机组成的联合循环装置及其辅助设备时提供帮助和基本信息。 本标准适用于不补燃的联合循环电厂，它包括新机组，以及对现有燃气轮机增加蒸汽轮机，或对现有蒸汽电厂用一台或多台燃气轮机扩大容量改造而组成的联合循环。如果作适当修改，本标准也可用作补燃的或其它循环配置的联合循环装置的通用规则。

Basic procurement information for combined-cycle plants

JB/T 9591.2-1999 燃气轮机.油系统清洁度测试.取样

本标准规定了燃气轮机油系统管道及油箱取样方法、取样点的选择和取样程序。 本标准适用于燃气轮机油系统，其它液压系统也可参照采用。

Cleanliness test for oil system of gas turbine sampling

JB/T 9589-1999 燃气轮机.基本部件

本标准规定了燃气轮机的压气机、燃烧系统和透平的技术要求。 本标准适用于工业、船舶和发电用的采用常规燃烧系统的开式循环、闭式循环和半闭式循环的燃气轮机。 本标准不适用航空动力装置、筑路机械、农业和工业牵引机械及汽车用的燃气轮机。 本标准与GB/T 14099-1993《燃气轮机--采购》同时使用。 本标准的目的是供用户为选购性能、利用率和可靠性都能满意的燃气轮机拟定技术条件使用，其内容仅限于燃气轮机基本部件，包括压气机、燃烧系统和透平。

Basic gas turbine

JB/T 9592.1-1999 全金属12角法兰面锁紧螺母.型式和尺寸

本标准规定了全金属12角法兰面锁紧螺母的型式和尺寸。 本标准适用于燃气轮机动力装置。

Prevailing torue type all-metal twelve point flange nuts,types and dimensions

JB/T 9592.2-1999 全金属12角法兰面锁紧螺母.技术条件

本标准规定了全金属12角法兰面锁紧螺母的制造方法和验收要求。 本标准适用于燃气轮机动力装置。

Specifications prevailing torque type all-metal twelve point flange nuts

JB/T 9591.3-1999 燃气轮机.油系统清洁度测试.用显微镜计数法测定油液中固体颗粒污染度

本标准规定了利用显微镜对滤膜表面上的固体颗粒按不同尺寸范围进行计数，测定油样中固体颗粒污染物的数量，以确定燃气轮机油系统清洁度的方法。 本标准适用于测定燃气轮机用润滑油、压力油和燃油的污染度，也适用于测定其它机械液压系统用油的污染度。

Cleanliness test for oil system of gas turbine measuring solid particle contaminant in oil liquid by microscopic counting method

JB/T 9590-1999 燃气轮机.维护和安全

本标准规定了在采购的燃气轮机动力装置时，维护和安全方面的基本要求。 本标准适用于工业、船舶和发电用的，采用常规燃烧系统的开式循环、闭式循环和半闭式循环的燃气轮机。包括机组正常工作时需要的各种辅机。 本标准不适用于航空动力装置、筑路机械、农业和工业牵引机械及汽车用的燃气轮机。

Gas turbine.Maintenance and safety

JB/T 9591.1-1999 燃气轮机.油系统清洁度

本标准规定了在制造、安装、维修和大修期间对燃气轮油系统的清洁度要求及相应的清洗和冲洗要求。本标准还规定了对冲洗用油及压力油和滑油系统工作用油的污染度要求。 本标准适用于燃气轮机动力装置。 本标准不适用于航空发动机、自由活塞燃气轮机等装置。

Cleanliness for oil system of gas turbine

DIN EN 45510-5-2:1998 发电厂设备购置说明.第5-2部分:燃汽轮机

The document gives guidance on writing the technical specification for the procurement of gas turbines to be installed in electrical power plants.

Guide for procurement of power station equipment - Part 5-2: Gas turbines; German version EN 45510-5-2:1998

JB/T 8741-1998 燃气轮机包装与贮运技术条件

本标准规定了燃气轮机包装与贮运的基本技术要求。 本标准适用于各类箱装式燃气轮机，经适当修改后亦可适用于非箱装式燃气轮机。本标准也适用于燃气轮发电机。 本标准可为制造厂和用户制订详细规范提供指导。

Specification for transport packages and storage of gas turbine

BS EN 45510-5-2:1998 发电站设备采购指南.燃气轮机

This standard gives guidance on writing the technical specification for the procurement of gas turbines, including gas turbines for combined-cycle systems, and their auxiliaries for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide is applicable to open-cycle gas turbines using normal combustion systems, generally greater than 20 MW electrical output, and also includes closed-cycle, semi closed-cycle and combined-cycle gas turbine power plants and combined heat and power plants. In cases of turbines using free piston gas generators or special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), this Guide may be used as a basis but will need to be suitably modified. This Guide excludes gas turbines for marine propulsion and those used to propel aircraft, locomotives, military vehicles, road construction and earth-moving machines, agricultural and industrial types of tractors and road vehicles. This Guide for procurement of gas turbines has been prepared to be used with the existing international standard ISO 3977. It should, therefore, be read in addition and complementary to the international standard. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Gas turbines

ASTM D4241-98(2003) 气体涡轮发电机润滑油系统设计的标准实施规范

This practice establishes minimum recommended design practices for gas turbine generator lubricating oil systems to ensure that: 3.1.1 Lubrication, control, and seal functions will be performed satisfactorily by the oil mutually acceptable to the parties concerned. 3.1.2 Installation, cleaning, and flushing will be facilitated. 3.1.3 Satisfactory system cleanliness can be maintained. 3.1.4 Safe practices are observed.1.1 This practice covers the design of lubricating oil systems for gas turbine driven generator units 1000 kW and larger.1.1.1 The lubricating oil system is defined as that assembly which utilizes and circulates the turbine generator lubricating oil and furnishes pressurized oil for control and seal functions.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems

ASTM D4241-98 气体涡轮发电机润滑油系统设计的标准实施规范

1.1 This practice covers the design of lubricating oil systems for gas turbine driven generator units 1000 kw and larger. 1.1.1 The lubricating oil system is defined as that assembly which utilizes and circulates the turbine generator lubricating oil and furnishes pressurized oil for control and seal functions. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems

NF E37-501-1*NF ISO 3977-1:1997 燃气轮机.采购.第1部分:一般说明和定义

Gas turbines. Procurement. Part 1 : general introduction and definitions.

ISO 2314:1989/Cor 1:1997 燃气轮机 验收试验 技术勘误1

This standard is about Gas turbines - Acceptance tests; Technical Corrigendum 1

Gas turbines - Acceptance tests; Technical Corrigendum 1

ISO 2314:1989/Amd 1:1997 燃气轮机 验收试验 修改1:联合循环动力设备的验收试验

This standard is about Gas turbines - Acceptance tests; Amendment 1: Acceptance test for combined-cycle power plants

Gas turbines - Acceptance tests; Amendment 1: Acceptance test for combined-cycle power plants

ISO 3977-1:1997 燃气轮机 采购 第1部分:序言和定义

This part of ISO 3977 groups together the terms and definitions given in ISO 11086 that are relevant to the procurement of gas turbine systems, and defines additional terms.

Gas turbines - Procurement - Part 1: General introduction and definitions

ISO 3977-2:1997 燃气轮机.采购.第2部分:额定基准条件和特性

This part of ISO 3977 specifies the standard reference conditions and ISO standard ratings for gas turbines.

Gas turbines - Procurement - Part 2: Standard reference conditions and ratings

BS ISO 11086:1996 燃气轮机.词汇

This International Standard gives terms and definitions used in the field of gas turbines. It applies to open-cycle gas turbines (using normal combustion sys-tems), closed-cycle, semiclosed-cycle and combined-cycle gas turbines.

Gas turbines - Vocabulary