K56 燃气轮机及其辅助设备 标准查询与下载
共找到 207 条与 燃气轮机及其辅助设备 相关的标准，共 14 页
Establishes the monitoring programme and the requirements for the selection and operation of hardware to be used for continuous gas emission measurements. Monitores the concentration and absolute magnitude of specified emissions in the exhaust gas as well as related gaseous components. Requires that the following parameters be continuously monitored: emissions, diluent gases (oxygen, carbon dioxide), exhaust gas flow, fuel consumption and gas turbine performance.
Gas turbines - Exhaust gas emission - Automated emission monitoring
- ICS
- 13.040.40;27.040
- CCS
- K56
- 发布
- 1997-04-15
- 实施
- 1997-04-15
Contains the methods used for the measurement and evaluation of the emission of the exhaust gases from gas turbines and defines appropriate emission terms. Presents requirements for the test environment and instrumentation as well as the accuracy of measurement and correction of data. Does not apply to gas turbines used in aircraft.
Gas turbines - Exhaust gas emission - Measurement and evaluation
- ICS
- 13.040.40;27.040
- CCS
- K56
- 发布
- 1997-04-15
- 实施
- 1997-04-15
Gaz turbines. Procurement. Basic procurement information for combined-cycle plants.
- ICS
- 27.040
- CCS
- K56
- 发布
- 1997-01-01
- 实施
- 1997-01-20
Performance test code on gas turbines
- ICS
- 27.040
- CCS
- K56
- 发布
- 1997-01-01
- 实施
Contains the methods used for the measurement and evaluation of the emission of the exhaust gases from gas turbines and defines appropriate emission terms. Presents requirements for the test environment and instrumentation as well as the accuracy of measurement and correction of data. Does not apply to gas turbines used in aircraft.
Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
- ICS
- 13.040.40;27.040
- CCS
- K56
- 发布
- 1996-08
- 实施
Establishes the monitoring programme and the requirements for the selection and operation of hardware to be used for continuous gas emission measurements. Monitores the concentration and absolute magnitude of specified emissions in the exhaust gas as well as related gaseous components. Requires that the following parameters be continuously monitored: emissions, diluent gases (oxygen, carbon dioxide), exhaust gas flow, fuel consumption and gas turbine performance.
Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
- ICS
- 13.040.40;27.040
- CCS
- K56
- 发布
- 1996-08
- 实施
Gives terms and definitions used in the field of gas turbines. It applies to open-cycle gas turbines (using normal combustion systems), closed-cycle, semiclosed-cycle and combined-cycle gas turbines.
Gas turbines - Vocabulary
- ICS
- 01.040.27;27.040
- CCS
- K56
- 发布
- 1996-04
- 实施
本标准规定了与燃气轮机配套使用的电气设备(除控制设备外)的通用技术条件。 本标准适用于发电用燃气轮机装置，对于机械驱动用燃气轮机装置亦可参照采用。
General technical specifications for gas turbine electrical equipment
- ICS
- 27.040
- CCS
- K56
- 发布
- 1995-11-24
- 实施
- 1996-07-01
Gas turbines - Procurement; Amendment 1: Basic procurement information for combined-cycle plants
- ICS
- 27.040
- CCS
- K56
- 发布
- 1995-11
- 实施
Thermal power plant -- Gas turbine and auxiliary equipment -- Vocabulary
- ICS
- 01.040.27;27.040
- CCS
- K56
- 发布
- 1995-07-01
- 实施
This standard provides guidance in the measurement of exhaust emissions for the emissions performance testing (source testing) of stationary gas turbines. Source testing is required to meet federal state, and local environmental regulations. The standard is not intended for use in continuous emissions monitoring (CEM) although many of the online measurement methods defined may be used in both applications. This standard applies to engines that operate on natural gas and liquid distillate fuels. Much of this standard also will apply to engines operated on special fuels such as alcohol, coal gas, residual oil, or process gas or liquid. However, these methods may require modification or be supplemented to account for the measurement of exhaust components resulting from the use of a special fuel.
Measurement of exhaust emissions from stationary gas turbine engines
- ICS
- 27.040
- CCS
- K56
- 发布
- 1994
- 实施
本标准规定了燃气轮机透平叶片枞树型叶根、叶根槽尺寸标注、公差及技术要求。 本标准适用于燃气轮机透平叶片枞树型叶根和轮盘枞树型叶根槽。
Tolerance and specifications for fir-tree root and groove of turbine blade of gas turbine
- ICS
- 27.040
- CCS
- K56
- 发布
- 1993-06-01
- 实施
- 1994-01-01
本标准规定了燃气轮机压气机叶片燕尾型叶根、叶根橹尺寸标注，公差及技术要求。 本标准适用于燃气轮机压气机叶片燕尾型叶根及燕尾型叶根槽。
Tolerance and specifications for dovetail blade root and groove of gas turbine compressor
- ICS
- 27.040
- CCS
- K56
- 发布
- 1993-06-01
- 实施
- 1994-01-01
本标准规定了燃气轮机制造过程中的质量控制要求，为制造厂及分供方在制订燃气轮机质量保证体系的文件时提供主要依据。 本标准适用于燃气轮机制造厂，也适用于分供方。
Quality control specification for gas turbine
- ICS
- 27.040
- CCS
- K56
- 发布
- 1992-06-16
- 实施
- 1993-01-01
本标准规定了燃气轮机产品的型号编制方法。 本标准适用于各种用途的开式循环燃气轮机型号编制，不适用于航空衍生（派生）型燃气轮机。
Method of model designation of gas turbine
- ICS
- 27.040
- CCS
- K56
- 发布
- 1992-06-16
- 实施
- 1993-01-01
Technical information for the procurement of industrial gas turbines and their auxiliaries.
Guide for gas turbines procurement
- ICS
- 27.040
- CCS
- K56
- 发布
- 1992-05-15
- 实施
- 1992-05-15
本标准规定了燃气轮机燃用气体燃料时对使用的气体燃料品质的要求。 本标准适用于发电或驱动用的燃气轮机。
Application guide for gaseous fuel of gas turbine
- ICS
- 27.040
- CCS
- K56
- 发布
- 1991-10-24
- 实施
- 1992-10-01
本标准规定了燃气轮机液体燃料的接受、贮存和处理系统应遵循的准则，对进入燃气轮机的液体燃料质量提出了技术要求，并对燃料中有害物质的控制提供指导。本标准不涉及燃料系统安全设计方面的问题。 本标准适用于发电及驱动用燃气轮机，船舶及其它场合使用的燃气轮机亦可参照使用。
Reception, storage and management of liquid fuel of gas turbine
- ICS
- 27.040
- CCS
- K56
- 发布
- 1991-10-24
- 实施
- 1992-10-01
