K85 电源设备 标准查询与下载

DB11/Z 797-2011 电动汽车电能供给与保障技术规范 供电系统

本指导性技术文件规定了电动汽车充电站供电系统的建设原则、供电范围、供电设施设置要求、供电要求、电能质量指标、电能计量、供电监控、安全要求、标识以及施工与验收。本指导性技术文件适用于北京市电动汽车充电站供电系统的建设。集中布置的总容量大于100kVA的交流充电桩可参照本指导性技术文件执行。

Technical Specifications for Electric Vehicle Power Supply and Guarantee Power Supply System

UL 1012-2010 2类外的动力装置

UL Standard for Safety Power Units Other Than Class 2 (Eighth Edition; Reprint with Revisions Through and Including May 14, 2014)

ANSI/UL 1047-2010 绝缘电力系统设备安全性标准

1. Revisions to Color-Code Requirements for Terminals or Leads to Which Isolated Output Conductors are Intended to be Field Connected and the Insulation on Internal Wires in Accordance with the National Electrical Code.

Standard for Safety for Isolated Power Systems Equipment

NF C53-040-1*NF EN 62040-1:2009 不间断电源(UPS).第1部分:UPS用一般要求和安全要求

Uninterruptible power systems (UPS) - Part 1 : general and safety requirements for UPS.

SANS 62310-3:2008 静态转换系统(STS).第3部分:性能确定方法及测试要求

Applies to single-phase, phase-phase and three-phase static transfers in a.c. systems up to 1 000 V. Covers methods for specifying performance and test requirements including applicable safety tests. Takes precedence over all aspects of generic performan

Static transfer systems (STS) Part 3: Method for specifying performance and test requirements

JIS C 9335-2-29 ERRATUM 1:2008 勘误表

ERRATUM

IEC 62040-1:2008/COR1:2008 不间断电源系统(UPS).第1部分:UPS用一般要求和安全要求.技术勘误1

Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS; Corrigendum 1

IEC 62040-1:2008 不间断电源(UPS).第1部分:UPS用一般要求和安全要求

This part of IEC 62040 applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is used with IEC 60950-1, which is referred to in this standard as "RD" (reference document). NOTE UPS applications generally make use of a chemical battery as the energy storage device. Alternative devices may be suitable, and as such, where “battery” appears in the text of this standard, where applicable, this may be understood as “energy storage device”. When a clause is referred to by the phrase "The definitions or the provisions of item/RD apply", this phrase is intended to mean that the definitions or provisions in that clause of IEC 60950-1 apply, except any which are clearly inapplicable to uninterruptible power systems. National requirements additional to those in IEC 60950-1 apply and are found as notes under relevant clauses of the RD. The primary function of the UPS covered by this standard is to ensure continuity of an alternating power source. The UPS may also serve to improve the quality of the power source by keeping it within specified characteristics. This standard is applicable to UPS which are movable, stationary, fixed or for building-in, for use in low-voltage distribution systems and intended to be installed in any operator accessible area or in restricted access locations as applicable. It specifies requirements to ensure safety for the operator and layman who may come into contact with the equipment and, where specifically stated, for the service person. This standard is intended to ensure the safety of installed UPS, both as a single UPS unit or as a system of interconnected UPS units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. This standard does not cover UPS based on rotating machines. Electromagnetic compatibility (EMC) requirements and definitions are given in IEC 62040-2.

Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS

UL 1778 BULLETIN-2008 不间断电源设备(UPS)UL安全性标准.评议提交截止日期:2008年4月11日

1.1 Scope Replace this clause of the RD with the following: 1.1.1 Equipment covered by this standard This Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS). The primary function of the UPS for this Standard is to ensure continuity of an alternating power source. The UNINTERRUPTIBLE POWER SYSTEM may also serve to improve the quality of the power source by keeping it within specified characteristics. This Standard is applicable to movable, stationary, fixed, and built-in UPS for distribution systems up to 600 V a.c. This equipment is designed to be installed in accordance with the Canadian Electrical Code, Part I, CSA C22.1, or the National Electrical Code, ANSI/NFPA 70, and, unless otherwise identified, the Standard for the Protection of Electronic Computer Data-Processing Equipment, ANSI/NFPA 75. This Standard specifies requirements intended to ensure safety for the OPERATOR and, where specifically stated, for SERVICE PERSONNEL. This Standard is intended to reduce the risk of fire, electric shock, or injury to persons from installed equipment, both as a single unit or as a system of interconnected units, subject to installing, operating, and maintaining the equipment in the manner prescribed by the manufacturer. 1.1.2 Additional requirements: In addition to the requirements in this Standard, a UPS is to

UL Standard for Safety Uninterruptible Power Systems COMMENTS DUE: APRIL 11, 2008

JIS C 4411-3 ERRATUM 1:2008 勘误表

ERRATUM

DIN EN 62310-2:2007 静态转换系统(STS).第2部分:电磁兼容性要求(IEC 62310-2:2006修改件)

Static Transfer Systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62310-2:2006, modified); German version EN 62310-2:2007

CSA C282-05 UPD 2-2007 建筑物紧急备用电源

Les notes à l’utilisateur aux normes CSA sont maintenant des Mises à jour. Veuillez communiquer avec le groupe Vente des produits d’information de la CSA ou rendez-vous au www.csa.ca pour plus de renseignements sur le service de mise à jour des normes

Emergency electrical power supply for buildings

DLA MIL-DTL-27072 D SUPP 1-2007 单层屏蔽,多导体,特殊用途电器电源电缆的一般规定

The activities listed above were interested in this document as of the date of this document. Since organization and responsibilities can change, please verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

CABLE, POWER, ELECTRICAL AND CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR AND SINGLE SHIELDED, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-06010 REV A-2007 2010型低功率(0.5瓦特)外部贴装的有金属电源板固定晶片电阻器

This drawing describes the requirements for a .200 X .100, .5 watt, fixed, power metal strip, surface mounted, chip resistor.

RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.5 WATT), STYLE 2010

UL 1564-2006 工业蓄电池充电器

These requirements cover battery chargers rated 600 volts or less. They are intended to be used in accordance with the National Electrical Code, NFPA 70, to charge industrial storage batteries which are used to provide power for material handling trucks, tractors, personnel carriers, and similar motive equipment. These chargers may be either cord and plug connected or permanently connected. A battery charger that is not a complete assembly and depends upon installation in an end product for compliance with the requirements in this Standard is investigated under the requirements of this Standard and the standard for the end product. These requirements do not cover: a) Battery chargers for use in a marina, boatyard, or other marine application; b) Battery chargers for fire protection signaling service; c) Household battery chargers; d) Automotive battery chargers; e) Battery chargers for use with an internal combustion engine driving a centrifugal fire pump; or f) Appliances or systems in which a battery charger is used.

UL Standard for Safety Industrial Battery Chargers Third Edition

SANS 62310-2:2006 静态转换系统（STS）．第2部分：电磁兼容性（EMC）的要求

Applies to free standing operation a.c. static transfer systems (STS) intended to ensure the continuity of load supply through controlled transfer, with or without interruption of power, from two or more independent a.c. sources. Applies to systems up to

Static transfer systems (STS) Part 2: Electromagnetic compatibility (EMC) requirements

DLA DSCC-DWG-06012-2006 2816型低功率(2.0瓦特)外部贴装的有金属电源板固定晶片电阻器

This drawing describes the requirements for a .280 X .165, 2.0 watt, fixed, power metal strip, surface mounted, chip resistor.

RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2.0 WATT), STYLE 2816

DLA DSCC-DWG-06011-2006 2512型低功率(1.0瓦特)外部贴装的有金属电源板固定晶片电阻器

This drawing describes the requirements for a .250 X .125, 1.0 watt, fixed, power metal strip, surface mounted.

RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (1.0 WATT), STYLE 2512

DLA DSCC-DWG-06009-2006 1206型低功率(0.25瓦特)外部贴装的有金属电源板固定晶片电阻器

This drawing describes the requirements for a watt, fixed, power metal strip,surface mounted,chip resistor.

RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.25 WATT), STYLE 1206

DLA DSCC-DWG-06007-2006 0603型低功率(0.1瓦特)外部贴装的有金属电源板固定晶片电阻器

This drawing describes the requirements for a .060 X .030, .1 watt, fixed, power metal strip, surface mounted, chip resistor.

RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.1 WATT), STYLE 0603