L19 磁性元器件 标准查询与下载

DIN EN 60205:2009 磁性零件有效参数计算(IEC 60205-2006 + A1-2009).德文版本EN 60205-2006 + A1-2009

Calculation of the effective parameters of magnetic piece parts (IEC 60205:2006 + A1:2009); German version EN 60205:2006 + A1:2009

IEC 60205:2009 磁性零件有效参数的计算

Calculation of the effective parameters of magnetic piece parts

DIN EN 60404-6 Berichtigung 1:2009 磁性材料.第6部分:使用环形样品的频率范围在20Hz～200kHz的磁性软金属和粉末材料的磁性能测量方法.技术勘误DIN EN 60404-6-2004

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20

IEC 60404-8-10:2009 磁性材料.第8部分:单项材料规范.第10节:继电器用磁性材料(铁和钢)规范

This International Standard specifies the general requirements@ magnetic properties@ geometric characteristics and tolerances as well as inspection procedures for magnetic materials used primarily for relays. This standard applies to pure iron@ non-alloyed and alloyed steel and ferritic stainless steel products usually delivered in either the semi-processed or fully-processed state. These materials correspond to classes A@ B@ C and D.3 of IEC 60404-1.

Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays

IEC 60424-5:2009 铁氧体磁芯.表面缺陷的限值指南.第5部分:平面磁芯

Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores

IEC 60205:2006/AMD1:2009 磁性零件有效参数的计算.修改件1

This International Standard lays down uniform rules for the calculation of the effective parameters of closed circuits of ferromagnetic material.

Calculation of the effective parameters of magnetic piece parts; Amendment 1

KS C IEC 62044-1:2008 软磁材料衬芯的测量方法.第1部分:总规范

이 표준은 인덕터, 변압기 및 전자파 간섭을 감소시키기 위한 부품 등에 사용되는 연자성체로

Cores made of soft magnetic materials-Measuring methods-Part 1:Generic specification

KS C IEC 60647:2008 电源用磁性氧化物磁芯(EC磁芯)的尺寸

이 표준은 고자속 밀도용인 산화물 자기 E-코아의 물리적, 자기적 치수에 대하여 규정한다.

Dimensions for magnetic oxide cores intended for use in power supplies(EC-cores)

KS C IEC 62323:2008 电感接近开关用铁氧体半壶形磁芯的尺寸

이 표준은 유도성 근접 스위치에 사용되는 일련의 페라이트 반쪽 포트(pot) 코아의 기계적

Dimensions of half pot-cores made of ferrite for inductive proximity switches

KS C IEC 62317-1:2008 铁氧体芯的尺寸.第1部分:总规范

이 표준은 페라이트 코아의 치수를 취급하고 있는 표준과 진행 중인 표준안을 상세히 설명한다

Ferrite cores－Dimensions－Part 1：General specification

IEC 60404-4:2008 磁性材料.第4部分:软磁材料的直流磁性的测量方法

This part of IEC 60404 specifies the methods of measuring the d.c. magnetic properties of magnetically soft materials in a closed magnetic circuit using either the ring or the permea- meter methods. The ring method is suitable for use with laminated or solid ring specimens as well as ring specimens produced by sintering. Two methods are used: a) the ring method, particularly for magnetic field strengths of up to 10 kA/m; b) the permeameter method for magnetic field strengths in the range 1 kA/m to 200 kA/m. NOTE The measurement of coercivity in an open magnetic circuit is specified in IEC 60404-7.

Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials

DIN EN 62024-1:2008 高频感应元件.电气特性和测量方法.第1部分:毫微亨等级芯片感应器

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2008); German version EN 62024-1:2008

IEC 62317-14:2008 铁氧体磁心.尺寸.第14部分:电源设备用EFD磁心

This part of IEC62317 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EFD-cores, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. The selection of core sizes for this standard is based on the philosophy of including those sizes which are industrial standards, either by inclusion in national standards, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included. The general considerations that the design of this range of cores is based upon are given in Annex A.

Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications

DIN IEC 60404-1:2008 磁性材料.第1部分:分类

Magnetic materials - Part 1: Classification (IEC 60404-1:2000)

GJB 6486-2008 烧结钐钴永磁材料规范

本规范规定了烧结钐钴永磁材料的要求、质量保证规定和交货准备等。 本规范适用于采用粉末冶金工艺生产的烧结钐钴永磁材料（以下简称材料）。

Specification for sintered samarium cobalt permanent magnetic materials

BS EN 60404-5:2007 磁性材料.永久磁铁(硬磁)材料.磁性能的测量方法

The purpose of this part IEC 404 is to define the method of measurement of the magnetic polarization and the magnetic field strength and also the determinatin of the demagnetization curve and recoil line of permanent magnet materials, such as those specified in IEC 404-8-1, the properties of which are presumed homogeneous throughout their volume. The performance of a magnetic system is not only dependent on the properties of the permanent magnet material but also on the dimension of the system, the air-gap and other elements of the magnetic circunit.The method s described in this standard refer to the measurement of the magnetic properties in a closed magnetic circuit simulating a ring.

Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties

SJ/T 11370-2007 计算机显示器用偏转磁心的尺寸

本标准规定了由软磁铁氧体材料制成的计算机显示器用喇叭形偏转磁心的尺寸及公差。 本标准适用于计算机显示器用喇叭形偏转磁心（以下简称偏转磁心）。

Dimensions of denection yoke cores for computer displays

KS C IEC 62317-9:2007 铁氧体磁心.尺寸.第9部分:平面磁心

이 규격은 다층보드로 구성된 전형적인 코일 또는 마더보드의 일부인 코일로 사용되는 유도 부

Ferrite cores-Dimensions-Part 9:Planar cores

IEC 62317-1:2007 铁氧体芯的尺寸.第1部分:总规范

It is intended that this standard will include ferrite cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial name for each standard part should appear with the part within this series. It is intended that this standard will exclude ferrite cores which are specialty cores with limited used. Also, special cores which are only marginal variations upon standard cores are excluded. IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of standard should be reflected in the other type.

Ferrite cores - Dimensions - Part 1: General specification

IEC 62025-1:2007 高频感应元件.非电气特性和测量方法.第1部分:电子和远程通信设备用固定式表面安装的感应器

This part of IEC 62025 applies to fixed, surface mounted inductors and ferrite beads. Should conflict arise between these specifications and the detail specifications, the latter will take precedence.

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment